本文へ移動

MuJoCo バージョン履歴

DeepMind Technologies Limited · 接触を伴う複雑なシステムの高速・高精度なシミュレーションとモデルベース最適化に対応する物理エンジンです。

CaskエンジニアリングとCAD 1.8万
インストールコマンド
brew install --cask mujoco
過去 30 日間のインストール数
46
Appランキング 1307 位
過去1年間のインストール数
330
過去365日間の合計
最新バージョン
4.0.1
ダウンロードサイズ
58MB
dmg
更新頻度
2週間ごと
過去30日間に2回リリース
  1. 4.0.1

    最新パッチ

    OpenNavo編集部 Homebrewへの登録

    MuJoCo 4.0.1 は 4.0.0 の誤った疎な求解結果を直し、読み込めないプラグインライブラリをスキップします。

    2026-11-11公開の MuJoCo 4.0.1 は、ロボットや機構をシミュレーションする人向けの物理エンジンです。この版は 4.0.0 の誤った疎な求解結果を直し、読み込めないプラグインライブラリ一つで起動が中断されないようにします。公式の説明:https://github.com/google-deepmind/mujoco/releases/tag/4.0.1

    • 文字列ベクトルの一項目をインデックスで読む関数を追加。
    • Studio のウェブビューアを同梱し、Windows でも動くようにした。
    • 4.0.0 の疎な Cholesky 分解を修正。Newton ソルバーに誤った因子を与えて発散することがあった(issue 3767)。
    • 読み込めないプラグインライブラリをスキップし、起動時に simulate を中断しない。
    • 円筒の縁の衝突での単発マルチコンタクトを修正(issue 3748 と 3752)。
  2. 4.0.0

    OpenNavo編集部 Homebrewへの登録

    MuJoCo 4.0.0 は 2026-11-06 にリリースされました。今回のアップデートでは投機的接触と弾塑性が追加され、Python パッケージが分割されました。

    • speculative フラグは投機的接触を追加し、高速で移動する凸形状のジオメトリが 1 タイムステップで薄い障害物を貫通しないようにします。
    • ジョイントとテンドンのバネは理想弾塑性を使用できます。塑性変形は mjData.plastic(mjSTATE_PLASTIC)に保存され、ジョイントならびに空間テンドンと固定テンドンに springyield があります。
    • 2D および 3D の flex は連続体弾塑性を使用できます。2D シェルは引張と曲げで別々の降伏ひずみを持ち、体積-偏差(von Mises J2)引張と 2D シェル曲げのリターンマッピングを備えます。
    • Python ディストリビューションは、mujoco-core(バインディングと C ライブラリ、numpy のみに依存)、mujoco-studio(Studio と Filament レンダラーのバインディング)、mujoco(両方をインストール)に分割されます。
    • 分割前の mujoco インストールを pip でアップグレードするには、先にアンインストールするか、pip install --force-reinstall --no-deps mujoco mujoco-core mujoco-studio を実行する必要があります。そうしないと pip が mujoco-core に移動したファイルを削除してしまいます。
  3. 3.17.0

    OpenNavo編集部 Homebrewへの登録

    スレッドプールによるバッチシミュレーション、1D flexの曲げ、参照テクスチャを追加。API/ABIとモデル動作に非互換変更。

    CバッチAPIとPython mujoco.batchを追加し、専用スレッドプールで同一モデルの多数のシミュレーションを実行。任意のスレッド数で通常ループとビット単位で同じ結果となり、メモリはワーカースレッド数に応じます。参照テクスチャの遅延読み込み、アセット重複排除を追加し、flex弾性、Filament、名前アクセス、エラー時の後処理を修正。PythonのBazelビルドは当初コアバインディングのみで、描画とビューアーを含みません。

    youngが正の1D flexは曲がるようになり、直線の基準形状とdiscrete積分器が必要です。既存モデルの動作が変わる場合があり、退化断面、長さゼロの辺、曲がった基準形状はコンパイルエラーになります。補間flexに自己衝突を追加。小さくなった既定arenaで不足するとNewtonからCGに警告付きで切り替わります。

    移行:mj_setConstはdampratioの減衰、自動腱ばね長、モデル統計を解決しなくなるため、コンパイル済みフィールドを直接編集します。終了基準の尺度が変わり、meaninertiaは非推奨です。mjNEQDATAが11から12となりABI非互換。relpose未指定のbody weldで相対姿勢を直接設定する場合、mj_setConst前にeq_data[11]をゼロにします。mjs_fuseStatic/mjs_discardVisualは件数か-1を返すため、エラー判定は!=0でなく<0。mjs_addTexture(spec)はmjs_addTexture(spec, NULL)へ変更。

    主要変更の要約です。完全なAPIとアセットパス移行は公式説明を参照。

    https://github.com/google-deepmind/mujoco/releases/tag/3.17.0

  4. 3.16.0

    展開

    OpenNavo編集部 Homebrewへの登録

    コンパイル時のスケーリング、モデル保存改善、API 移行。

    MuJoCo 3.16.0 — リリースノート

    主な変更:frame にコンパイル時の scale、scaling、massscale を追加。既定の similar は比例重力下の動力学を維持し、geometry は寸法と慣性のみを変更します。savecompiled と savecanonical は既定で true、無効化すれば元の記述を保持できます。Bazel、接触相対速度、手続き型メッシュ、flexcomp のメッシュ資産、Python 構造体代入を追加。

    移行:デコーダーに char* error, int error_sz を追加し、リソースプロバイダー関数を改名。mj_copyBack と mj_saveLastXML は表現できない変更を拒否し、構造編集後は再コンパイルしてからコンパイル済み値を保存します。API で追加する資産は明示的な名前が必要です。replicate のキーフレームはモデル全体に合わせて記述。inertiafromgeom="true" で質量のある視覚形状を捨てるとエラーになるため、auto または質量ゼロを使用します。駆動器のゲインは同種のショートカットまたは general の既定クラスに指定。settotalmass は非推奨で、質量/密度の変更か mj_setTotalmass と mj_setConst を使います。

    Filament の mjrf 関数・型・フラグを改名し、列挙フラグは整数から文字列に変更。VSM ソフトシャドー設定は削除され、filament.shadows.type=pcss に移行します。filament.msaa.enabled は削除し、offsamples または mjrf_setSceneMsaa を使用。公開デバッグ編集 API も削除。

    弾性剛性、布の接触、カプセル衝突、腱の巻き付き、モデル保存・編集を修正。剛性修正は既存モデルの挙動を変える可能性があります。これは分類要約です。全改名表と移行詳細は公式版説明を参照してください。

    公式ソース

  5. 3.15.0

    展開

    OpenNavo編集部 Homebrewへの登録

    アクチュエータの減衰計算を改訂し、エンジン機能を追加するとともに、`.mjz` アーカイブとモデルのシリアライズを更新しました。破壊的な API 変更と、実験的な弾性機能の制約があります。

    エンジン
    破壊的変更:dampratio の反射慣性計算を改訂非補間3Dフレックスに実験的な弾性機能を追加フレックスの力が関節付き頂点アタッチメントを考慮カプセルのマルチコンタクトと insidesite 属性を追加非推奨のフレックス衝突オプションと関連構造を削除フレックス曲げ係数が座標間の結合を保持
    全般
    Windowsで書き込む .mjz はスラッシュ区切りを使用再書き込み後や絶対、..、URI パスでアセットを正しく解決モデルのシリアライズが2 GiB超のバッファーに対応

    MuJoCo 3.15.0 では、dampratio が mjModel.qpos0 で反射慣性を計算する方法を変更しました。現在は操作空間慣性を使用し、複数出力アクチュエータでは力出力間で平均します。複数リンクの運動連鎖を駆動するアクチュエータでは減衰が小さくなる場合があります。一方、複数の関節にまたがる腱やサイトを駆動するアクチュエータでは、より正確に減衰が計算されます。これは破壊的な API 変更です。非推奨の内部フレックス衝突オプションと関連する evpair 構造体は削除されました。

    非補間3Dフレックスでは、mjsFlex.elastic3d = 1 により実験的な簡易 Stable Neo-Hookean 弾性を利用できます。この機能には離散積分器が必要で、MJCF では使用できません。既定値は StVK のままです。フレックスの曲げと伸縮は関節付き頂点アタッチメントを考慮するようになりました。離散積分器では CG ソルバーを使ってこれらを処理できます。mocap ボディに取り付けられた弾性フレックスはコンパイラーエラーになります。ほかに、カプセルのマルチコンタクトと、符号付きクリアランスまたは突出量を報告する insidesite センサーの enclosed 属性を追加しました。フレックス曲げ係数は座標間の結合も保持します。

    Windowsで書き込む .mjz アーカイブでは、区切り文字にスラッシュを使用します。書き換え後のアーカイブや、絶対パス、..、URI スキームを使うディレクトリパスでもアセットが正しく解決されます。mj_saveModel と mj_loadModelBuffer は buffer_sz に mjtSize を受け付け、2 GiBを超えるモデルを扱えます。

    出典:https://github.com/google-deepmind/mujoco/releases/tag/3.15.0

  6. 3.14.0

    展開

    OpenNavo編集部 Homebrewへの登録

    実験的な貫通防止 flex 接触とアーカイブリソースプロバイダーを追加し、MJCF 保存時に frame を保持します。制御読み取りと spec シグネチャ API を変更し、エンジンや解析の問題を修正しました。

    全般
    対応する dim-2 flex に実験的な IPC 接触を追加。.mjz や .zip などに対応するアーカイブプロバイダーを追加。MJCF 保存時に frame 変換と相対座標の内容を保持。
    エンジン
    mj_readCtrl が複数入力アクチュエーターに対応。API 変更あり。編集後、未コンパイルの mjsSpec のシグネチャは 0 に。慣性警告の対象となる積分器の分解処理を拡大。
    修正
    spec 編集を増分処理に変更。8,000 geom の構築が約10倍高速に。force/torque センサーが報告する weld と tendon の力を修正。メモリリーク、GMSH 読み取り、疎 Newton の主元処理を修正。

    MuJoCo 3.14.0 では、dim-2 flex 向けの実験的な IPC 接触が追加されました。このモードは摩擦なし接触を使い、保持する接触乗数は mj_getState/mj_setState に含まれないため、完全な再生には対応しません。アーカイブリソースプロバイダーにより、事前に VFS を割り当てずに .mjz や .zip などのコンテナーをマウントできます。MJCF の保存時に frame 変換と frame 相対の内容が保持されるようになり、mjSpec 内で frame の pos または quat を変更した場合も再コンパイルに反映されます。

    破壊的な API 変更として、mj_readCtrl は mj_readSensor と同様の動作になり、複数入力アクチュエーターに対応します。戻り値は状況に応じてポインターまたは NULL となり、制御履歴バッファーのサイズ要件も変わります。構造編集後の mjsElement.signature は、mj_compile が成功するまで 0 です。未コンパイルの別のシグネチャに依存するコードは、先にコンパイルする必要があります。mjs_setName が重複名で失敗した場合は、以前の名前が保持されます。

    ほかに、mjWARN_INERTIA の対象拡大、疎 Newton の主元処理、増分式のモデル編集、weld と空間 tendon の力報告を変更しました。アクチュエーター力制限の既定値、sleeping 有効時の有限差分処理、削除時のメモリリーク、切り詰められた GMSH ヘッダーも修正しています。

    出典:https://github.com/google-deepmind/mujoco/releases/tag/3.14.0

  7. 3.13.0

    展開

    OpenNavo編集部 Homebrewへの登録

    離散積分器、site のメッシュ対応、Python 3.15 対応を追加。flex の積分動作に移行要件があり、PBR の metallic フォールバック色も変更されました。

    エンジン
    剛性と減衰を陰的に扱う離散積分器を追加。円柱の multicontact を追加し、慣性ピボットのクランプを復元。Newton の円錐再分解を変更し、一部の接触シーンに影響。
    全般
    site ジオメトリがメッシュを利用可能に。mj_insideSite を追加。GIL と free-threading を含む Python 3.15 に対応。
    その他
    従来の implicit/CG 動作に依存する flex モデルは移行が必要。metallic テクスチャなしの PBR フォールバックを黒から白に変更。

    MuJoCo 3.13.0 では離散積分器を追加し、制約ソルバーと陰的な速度更新を統合します。関節、テンドン、アクチュエータの剛性と減衰をソルバーのメトリックに含め、制約のばね・ダンパーをステップ終了時に評価します。意味と現時点の制限についてはリリースノートを参照してください。

    以前の implicit または implicitfast と CG ソルバーの組み合わせで利用できた flex 有効メトリックの特別処理は削除されました。この動作に依存するモデルでは integrator="discrete" と primal ソルバー(CG または Newton)を指定してください。従来の設定で flex 弾性または受動 flex 接触を使うと、移行案内付きの実行時エラーになります。その他のエンジン変更には、円柱ジオメトリの single-shot multicontact、疎な慣性分解での非正ピボットのクランプと mjWARN_INERTIA 警告の復元、Newton 楕円錐の再分解方式の変更があります。滑り接触が多いシーンでは後者が高速化につながる場合があります。Plane-Mesh コライダーはバグ修正と性能向上のために書き直されました。

    site ジオメトリはメッシュを参照できるようになり、可視化、insidesite センサー、mj_insideSite をサポートします。また Python 3.15、MJCF カスタムテキストの CDATA 入力、触覚センサーの cutoff 属性、ヘッドレス render.cc サンプル、カードハウスとアーチのモデルが追加されました。.mjz アーカイブのルートファイル名は model.xml になりました。metallic テクスチャのない PBR マテリアルでは、metallic のフォールバックが黒から白に変わりました。

    出典:MuJoCo 3.13.0 リリース

  8. 3.12.0

    展開

    GitHub Release Homebrewへの登録

    Version 3.12.0 (August 20, 2026)

    General

    1. 3f8db4c1 The MJCF grammar is now defined in a single source of truth schema file, src/xml/mjcf.schema. The parser's grammar table, presence constraints, keyword maps, typed attribute bindings and save policies are generated from it and gated by tests, as are the schema's enum keywords and declared defaults against the C headers and default-constructors.

    [!WARNING] Breaking API changes 2. 6fe04aa8 Removed the custom binary texture format (image/vnd.mujoco.texture) and the automatic fallback to custom textures when loading files with unrecognized extensions. Textures can now only be loaded from PNG (image/png) and KTX (image/ktx) files.

    Actuation

    1. 279df98c Added the pid actuator: a PID controller with real position and velocity setpoint inputs, optional integral action (ki, integrating the position error with imax anti-windup), setpoint rate limiting (slewmax), and an optional feedforward input. This subsumes the functionality of the mujoco.pid plugin with proper activation state: correct under all integrators and visible to keyframes and sensors. With a zero velocity setpoint it is identical to position. The input signature is any subset of [pos, vel, ff], selected by input; absent setpoint inputs are fixed at zero, so the control vector contains no inert entries.
    2. 2f1843f4 The dcmotor on-board controller is redesigned: the input attribute selects any subset of [pos, vel, ff, voltage], where pos and vel are setpoints for the controller, ff is a torque feedforward, and voltage is the raw terminal voltage (the default, a plain voltage-commanded motor). Controller gains are in torque space, as for pid, and the drive voltage compensates back-EMF as in a current-controlled driver: commanded torque is delivered exactly until a limit is reached. The keyword input="none" selects the empty signature: the actuator has no control inputs and is purely passive, so friction, cogging and back-EMF braking can be used as passive joint forces.

    [!WARNING] Breaking API changes 5. 2f1843f4 The mode-flag semantics of dcmotor/input ("voltage", "position", "velocity", selecting the interpretation of a single control) are replaced by input signatures, and the controller gains changed from voltage space to torque space. The old velocity mode's integral term (integrated-velocity tracking) is retired without replacement; the integrator always accumulates position error.

    Migration: Voltage-commanded motors (the default) are unchanged. Replace input="position" with input="pos" and input="velocity" with input="vel", and multiply the controller gains by $K/R$ (torque per volt). The motor's back-EMF damping, previously felt in addition to the controller's damping, is now compensated: to preserve behavior when the velocity setpoint is zero, add $K^2/R$ to the converted kd.

    Engine

    1. 83e621d7 Optimized large-mesh convex collision detection with up to 2x speedup in certain cases.
    2. 55d13aec Replaced the per-step sparse Cholesky factorization of the flex block of the implicit effective metric M + K with its prefactored per-vertex 3x3 diagonal blocks. The blocks precondition the CG constraint solver and drive an iterative solve for qacc_smooth, which now converges on tolerance rather than a fixed threshold. Flexes with elastic2d stretch stiffness step roughly twice as fast; bending-only flexes keep the exact constant factor and are unchanged.
    3. 86e98601 Rewrote cleaner box-box SAT collider.

    [!WARNING] Breaking API changes 9. 2a3554c8 Contacts of a flex with passive collisions are now integrated implicitly: their stiffness is carried by the effective metric rather than applied as an explicit spring, and can be far stiffer than the timestep would otherwise permit. Models using passive collisions should be re-checked: the feature now requires implicit or implicitfast with the CG solver, pyramidal cones and sleep disabled; passive handling covers flex-flex, self-, and static-geometry contact, while contact with a moving body stays on the constraint solver; and the stiffness is now a mass-scaled natural frequency rather than a fixed 1e4. 10. 55d13aec Removed mjData.efm_L_rownnz, mjData.efm_L_rowadr and mjData.efm_L_colind. They described the sparsity of the effective-metric Cholesky factor, which no longer exists; mjData.efm_L now holds dense 3x3 blocks, 9 numbers per covered vertex. mjData.efm_active no longer takes the value 2: nothing selects a solve path on preconditioner exactness, so it is now a plain 0/1 flag. 11. 1362a8bd Changed the default value of bvactive from "true" to "false". This avoids unnecessarily clearing bounding volume hierarchy visualization flags at every simulation step, which can be a bottleneck for models with large meshes. 12. ed13bf56 Mocap bodies and their dof-less descendants are now the root of their own weld group: mjModel.body_weldid of a mocap body equals its own id rather than 0. Consequences: dragging a mocap body into sleeping objects now wakes them; children of mocap bodies receive standard parent-child collision filtering; mocap bodies no longer count as static geometry for ray casting, and contact-matching sensors aggregate their contacts under the mocap body rather than the world; and geom pairs where neither body can move no longer generate contacts.

    Models

    1. 2a3554c8 Added drape example model: three cloths draped over a sphere, demonstrating passive collisions. It replaces the sphere_passive model, which has been removed.
    2. 55d13aec Added bag example model: a cloth bag, held open by pinning the ring of vertices around its mouth, catching the standard humanoid dropped in from above. Unlike the poncho models, which are bending-only, this model exercises the 2D stretch elasticity of a flex.

    Rendering

    [!WARNING] Breaking API changes

    1. cc7fb98c Added explicit texture coordinates to built-in geometries (Plane, Box, Sphere, Ellipsoid, Capsule, Cylinder) in both the Classic renderer and Filament. 2D textures applied to primitive shapes will look different as textures are mapped using canonical UV parameterizations rather than projecting onto the $x,y$ plane.

      For finite planes, textures are now anchored to the bottom-left corner instead of the center. This will cause the most common visual breakage, as common procedural checker textures will be phase shifted. Infinite planes continue to be anchored at the origin with no visual changes.

    2. f9a00bd5 Added light/softness: edge softness for spotlights under physically-based lighting models, given as the fraction of the cone over which intensity falls to zero. The default of 0.2 is a semi-soft cone which delivers the full intensity everywhere inside it, so that illuminance follows $E = I/d^2$ independent of the cutoff angle. Previously the filament renderer treated the entire cone as penumbra, dimming spotlights well below their rated intensity, increasingly so for narrow cutoffs.

      Migration: Set softness to 1 to reproduce the previous appearance of existing models.

    MJX

    [!WARNING] Breaking API changes 17. 5e3464f4 mjx.render and mjx.render_with_segmentation now return the updated mjx.Data as the last element in their return tuple (i.e. (rgb, depth, d) and (rgb, depth, seg, d)). This ensures JAX/XLA strictly enforces causal scheduling between sequential refit_bvh and render calls.

    **Migration:** Update unpacking calls from `pixels, depth = mjx.render(mx, d, rc)` to `pixels, depth, d = mjx.render(mx, d, rc)`.
    

    Bug fixes

    1. 95539261 Fixed a bug where models with pinned interpolated flex nodes (e.g. a flexcomp with dof "trilinear" and pinned vertices) could not be reloaded after saving: node coordinates within their body frames were not saved, degenerating the interpolation grid. They are now saved in the new flex nodecoord attribute.
    2. 8655446f Fixed a bug in the box-box collider where near-degenerate face clipping could generate contacts with spuriously large penetration depth between nearly touching thin boxes with positive margin, causing resting stacks to explode.
    3. fb07a9ca Fixed a bug in the box-box collider where penetrations deeper than a box's smallest half-size could produce no contacts, letting boxes tunnel through thin boxes. Fixes #1800.
    4. 54979947 Fixed the flex stretch stiffness operator, which was the Gauss-Newton Hessian of the stretch force rather than its Jacobian: the geometric (stress-proportional) term was missing. Only the tensile part of that term is added, since it is positive semi-definite exactly when the edge is in tension, and its consumers require an SPD operator; the stretch force itself is unchanged. This affects the implicit integrators and the implicit effective metric, so flexes using elastic2d="stretch" integrate slightly differently. Bending-only flexes are unaffected.

    OpenUSD

    1. 39e44588 Upgraded Newton USD schemas support to version 0.4.0:
      • NewtonJointAPI (newton:armature, newton:damping, newton:friction) deprecates the MjcJointAPI equivalent mjc:armature, mjc:damping, and mjc:frictionloss attributes.
      • NewtonMassAPI (newton:massModel, newton:inertia) deprecates the MjcCollisionAPI equivalent mjc:shellinertia and MjcMeshCollisionAPI mjc:inertia attributes. This completes the deprecation of all MjcMeshCollisionAPI attributes, slating it for removal in a future release.
      • Added support for NewtonSiteAPI to declare sites, MjcSiteAPI auto applies this schema, but remains as an extension for the mjc:group attribute.
      • Added support for NewtonMaterialAPI (newton:contactAdhesion, newton:torsionalFriction, newton:rollingFriction). This deprecates MjcMaterialAPI which will be removed in a future release.
      • Added support for NewtonMimicAPI (newton:mimicJoint, newton:mimicCoef0, newton:mimicCoef1) as a base for MjcEqualityJointAPI, this deprecates the mjc:coef0 and mjc:coef1 attributes and the mjc:target relationship.
      • Added support for NewtonArticulationRootAPI (newton:jointsAddMobility).

    [!CAUTION] Breaking ABI changes 23. 279df98c mjsActuator gained velrange and ffrange fields, changing its size and layout. The mjtGain and mjtDyn enums gained pid members, shifting the values of mjGAIN_USER and mjDYN_USER. 24. 596b6f43 mjResource gained an args field (changing its size and layout), used to hold optional extra encoding and decoding arguments formatted as URI query parameters (separated by &).

  9. 3.11.0

    展開

    GitHub Release Homebrewへの登録

    Version 3.11.0 (July 27, 2026)

    Engine

    1. 4787c809 Added geom/surfacevel: the velocity of a geom's surface as seen by contacts, given as a velocity field with a constant component and a rotational component about the geom frame origin. This allows conveyor belts, treadmills and turntables to be modeled with static geoms and no degrees of freedom: friction drives touching bodies along the motion of the surface, with the field projected onto each contact's tangent plane. Surface velocities compose correctly with each other and with body motion. Note that the contact rows of mjData.efc_vel, and the constraint-state sensors that read them, report the velocity relative to the moving surface rather than to the geom, since that is the quantity the constraint acts on; for geoms without surfacevel the two are identical. Contact-point visualization draws an arrow along the surface velocity at contacts with moving surfaces.

      [Image: Watch video](https://youtu.be/PdSdrqhSiZA)

    2. a264d0bc Added geom/adhesion and pair/adhesion: an adhesive force associated with a contact, useful for modeling sticky materials. Contacts can pull with up to the given force before breaking, and the friction budget becomes $\mu(f_N + \text{adhesion})$. Combined with gap, adhesive contacts apply "adhesion at a distance", useful for modeling magnets. Resting penetration is unaffected by adhesion. mj_contactForce reports the net interface force, whose normal component can now be negative.

      [Image: Watch video](https://youtu.be/GioWwB36XHI)

    3. f0fa3d82 Replaced midpoint integration of free bodies with gyroscopic derivatives in the implicitfast integrator: the bias-force derivative of every standalone free body is applied via a local unsymmetric solve of its decoupled block, making implicitfast identical to implicit for such bodies. Unlike midpoint integration, which required vacuum and no constraints, this applies in all environments (contacts, fluid, constraints), and is compatible with discrete-time inverse dynamics. Spinning free bodies no longer gain energy, but tumbling motion is now mildly damped; models requiring long-horizon energy conservation of tumbling bodies in vacuum should use RK4. The invdiscrete flag no longer has any effect on forward dynamics.

    4. 5618666a Added body/simple attribute ("false"/"auto") to disable the simple body mass matrix optimization. This is useful for domain randomization, where model parameters may change post-compilation.

    5. 14c0b0c9 mj_setConst now recomputes the mjModel.{body,geom,site}_sameframe flags, to account for changes in body/geom/site frames after compilation.

    6. 2444defc Added support for multiccd with arbitrarily large meshes.

    7. a04b0c5b Added flg_gravcomp and flg_surfacevel boolean flags to mjModel. These flags replace the fast-path checks as originally guarded by ngravcomp. Since the engine uses these integers as flags (zero vs. non-zero), the new flags are honest boolean properties, writeable from the Python bindings at runtime. The field ngravcomp is deprecated and will be removed in a future release.

    8. a1f38c8e Replaced quadratic scratch in DFS flood-fill island discovery with a linear-memory Union-Find (disjoint set). Contribution by @teerthsharma.

    [!WARNING] Breaking API changes

    1. ff629889 Changed the default value of sleep_tolerance from 1e-4 to 1e-3 (1mm/sec in SI units).
    2. 315bcfbf Removed the legacy sparse ancestor-walk inertia matrix mjData.qM. The joint-space inertia matrix is now stored exclusively in the compressed sparse row (CSR) format mjData.M.
    3. 7e9ac58f Switched mjd_inverseFD to use the CSR-format mjData.M representation instead of the legacy mjData.qM for the mass matrix derivative. This changes the shape of the DmDq parameter from (nv x nM) to (nv x nC).
    4. 1ea2d884 mju_round now breaks ties away from zero rather than towards $+\infty$. This only affects negative half-integers, e.g. mju_round(-2.5) now returns -3 rather than -2.
    5. fa36015b Removed unneeded mjvScene argument from mjv_moveCamera.
    6. ba9a6503 Split up mjrfMeshData into mjrfMeshData and mjrfMeshConfig to allow reuploading of mesh data without having to recreate the mesh object. Introduces mjrf_defaultMeshConfig and mjrf_setMeshData functions.
    7. ba9a6503 Removed bytes field from mjrVertexAttribute.

    [!CAUTION] Breaking ABI changes

    1. 072e963f mjModel gained the actuator_ctrlspec field (input signature of each actuator), and mjsActuator gained ctrlspec, changing their size and layout. The mjtGain and mjtBias enums gained so3 members, shifting the values of mjGAIN_USER and mjBIAS_USER.
    2. d43c3ed4 Added texid, texuniform and texrepeat fields to mjvGeom.
    3. a264d0bc The mjContact struct gained an adhesion member, changing its size and layout.

    [!NOTE] Bug fixes

    1. dddb2767 Fixed a bug where body_margin excluded gap, causing the mid-phase collision filter to incorrectly prune in-gap contacts on multi-geom bodies.

    Actuation

    1. d507e921 Refactored actuator infrastructure in preparation for MIMO (multi-input multi-output) actuator support. Each actuator now has ctrlnum (number of controls) and outnum (number of force outputs). The total counts nu = sum(ctrlnum) and nout = sum(outnum) dimension mjData.ctrl and mjData.actuator_force, respectively, nactuator is the number of actuators. For existing actuators ctrnum = outnum = 1, so nactuator == nu == nout and existing code is unaffected.

    2. 56a93979 Setpoints of position and intvelocity servos acting on 3D rotational transmissions (ball joints, or site transmissions with a refsite and purely rotational gear) are now interpreted on the circle: the force uses the setpoint representative nearest the current angle, so targets winding beyond half a turn are tracked continuously instead of slipping by full turns. Behavior is identical whenever the error does not exceed π. Relatedly, intvelocity actuators now expose actlimited, which was previously hardcoded to "true": as for general actuators it defaults to "auto", so activation clamping is enabled by specifying actrange. Unclamped integrated setpoints are well-behaved on rotational transmissions, where they wrap.

    3. 072e963f Added the orientation actuator: a geodesic servo on a new SO(3) transmission (ball joints, or a site with a refsite), acting jointly on the full relative orientation with an exact equilibrium at every commanded orientation. This is the first actuator with multiple force outputs (3), and, with input="quat", the first with different input and output dimensions (4 controls, 3 outputs). The input signature is recorded in the new mjModel.actuator_ctrlspec, exposed as the input attribute.

    [Image: Watch video](https://youtu.be/17XpwnqyCXs)

    1. 072e963f Added mj_actuatorInputName, returning the name of an actuator input (e.g. "qw" for the first control of a quaternion-commanded orientation actuator). The control sliders in simulate and MuJoCo Studio are now generated per control and labeled with the actuator name plus the input name suffix.

    2. 072e963f Viewer control sliders now use a defined ctrlrange even when ctrllimited is "false": the range sets the slider span, while clamping remains controlled by ctrllimited.

    3. 072e963f Added mj_resetCtrl, setting controls to neutral values: zero, except quaternion inputs which reset to the identity quaternion. Called by mj_resetData and the viewers' "Clear All".

    Solvers

    1. ea230a95 Flex elasticity (stretch, bending, interpolation stiffness) is now integrated implicitly inside the CG constraint solver via an effective metric: the mass matrix is augmented with the stiffness Hessian, so contact and elastic forces are solved against one consistent metric. This replaces the previous post-hoc CG correction, which modified qacc after the constraint solve. The gate is solver="CG" with an implicit integrator and flex stiffness present; Newton and PGS are unaffected. Bending-only models pay zero per-step factorization cost (the factor is precomputed in mj_setConst). Inverse dynamics (mj_inverse) is now discrete-consistent with forward dynamics for gated models.

    2. c499f7f2 Added Nesterov momentum extrapolation with adaptive gradient restart (O'Donoghue-Candès) to the PGS solver, significantly improving convergence. Overall PGS now requires ~2x fewer iterations.

    3. 1e66efd1 Added the Newton decrement -- the quadratic model's predicted cost improvement of the next iteration -- as a third early-termination criterion of the Newton solver, alongside cost improvement and gradient norm. This reduces iteration counts at no accuracy cost. Proposed by @adenzler-nvidia in MJWarp pull request 1520.

    4. c69ef030 The CG and Newton solvers now terminate with zero iterations when a duality-gap certificate proves that the warmstarted solution already satisfies the tolerance. The certificate requires only the existing mass-matrix factorization, so quiescent scenes skip Hessian construction, factorization and the line search entirely. Newton zero-iteration exits additionally require the gradient criterion, preserving Newton's characteristic force-level accuracy. See Warmstart in the Computation chapter for details.

    Compiler

    1. 4e1795b9 mj_encode now supports encoding of MJB and TXT files.

    2. c6c3ec31 The attach element now supports self-attachment (attaching elements of the current model to itself) by omitting the model attribute. It also supports attaching a frame via the new frame attribute, which is mutually exclusive with body.

    3. 040872fd Fixed loading of .mjz archives in simulate: the archive was unmounted before model compilation, so assets failed to load. Failures in the mjz decoder now emit a warning with the underlying error instead of the generic "could not decode content" message.

    4. ebd4abae The mjz decoder now searches for model.xml and <stem>/model.xml as a fallback if <stem>.xml and <stem>/<stem>.xml are not found.

    5. dc7581ac Added support for resource writing via mju_writeResource and the write callback in mjpResourceProvider.

    [!WARNING] Breaking API changes

    1. d83ef0b6 The return type of mj_encode and the mjfEncode callback changed from int to mjtSize (64-bit).

    [!NOTE] Bug fixes

    1. f5f9d9ef Fixed a bug in the mesh compiler where normals were scaled as vectors rather than covectors.

    Python bindings

    1. a07ae6f8 The bindings now support free threading (PEP 703) for Python 3.14.

    Documentation

    1. 1f1bfa9e Expanded documentation for spec.encode workflows and added detailed documentation for the MJZ Archive format (.mjz / .zip).