跳到正文

VeraCrypt 版本记录

AM Crypto · 适用于文件容器和存储设备的开源磁盘加密软件,支持即时加密、隐藏卷和 macOS 桌面界面。

Cask安全与隐私 1.2万
主页
安装命令
brew install --cask veracrypt
近 30 天安装
441
App榜第 444
近一年安装
4,643
365 天累计
最新版本
1.26.31
下载大小
21MB
dmg
更新节奏
每两周
近 30 天 2 个版本
  1. 1.26.31

    最新补丁

    OpenNavo 编辑 Homebrew 收录

    VeraCrypt 1.26.31 于 2026-11-02 发布。在 Linux、macOS 和 BSD 上,由 VeraCrypt 启动的程序不再继承其管道、文件或设备,等待挂载工具的进程也不再挂起。

    • 安全:由 VeraCrypt 启动的程序不再能继承其界面与服务之间的管道,否则它们可能借此使用活跃的管理员会话。此改动扩展了 1.26.30 中加入的防护。
    • 安全:由 VeraCrypt 启动的程序不再能继承其打开的文件、设备和内部管道。
    • 修复了 VeraCrypt 在等待用于挂载卷或在文件管理器中打开卷的系统工具时可能挂起的情况。改进了这些工具的超时处理。
    • 说明文档指出,通过 sudo 或 doas 以 root 身份运行 VeraCrypt 或其核心服务的权限等同于完整的 root 权限。
    • 修复了尚不存在的目录的挂载点校验,包括包含“..”或符号链接的路径。
    • 恢复了 Unix GUI 和控制台构建对 GCC 4.4 的兼容性。
    • 改进了长卷路径下的密码对话框标题,尽可能保留卷文件名,并适应窗口大小调整。
    • 同一版本还更新了所有操作系统上的翻译和文档,并包含单独的 Windows 修复,此处不再重复。
  2. 1.26.30

    补丁

    GitHub Release Homebrew 收录

    Downloads: Jump directly to installers, packages, source archives, checksums and signatures

    Changes between 1.26.29 and 1.26.30 (24 October 2026):

    • All OSes:

      • Security: Improve erasure of security token data and limit smart card responses to prevent hangs or excessive memory use.
      • Fix unintended reuse of the current PIM when switching KDFs in the password-change and header-KDF dialogs. The selected KDF's default PIM is now used unless a new PIM is explicitly specified.
      • Fix cryptographic errors on processors using big endian byte order. Prevent alignment crashes on affected processors, including 32 bit ARM. (GH #1899, GH #1908, GH #1909)
      • Fix ChaCha output when processing successive partial blocks.
      • Improve encryption worker error handling and wait for active work to finish before shutdown.
      • Update translations and correct missing entries, formatting placeholders and escaped punctuation.
      • Expand documentation for EFI Secure Boot certificate migration, KDF selection, supported operating systems and Windows builds.
    • Windows:

      • Security: Fix GHSA-w98h-pqh6-wfjj: insufficient protection of system encryption support files could enable local privilege escalation during a qualifying Windows feature update or tampering with the BIOS loader during restoration. Protect setup scripts, driver packages and recovery backups, and reject untrusted legacy backups and driver sources.

      • Security: Fix GHSA-9mgv-w2fw-3m78: prevent local disclosure of limited disk metadata.

      • Fix driver stability regressions reported with VeraCrypt 1.26.29 and improve cleanup during mounting and dismounting. Restore the previous I/O completion behavior and disable ordered flush barriers by default.

      • Handle processor state-save failures safely during key derivation and fix KDF worker completion and startup cleanup.

      • Improve system encryption setup and upgrade failure handling. Retain recovery backups during uninstall, warn when an encrypted system's original loader backup is unavailable, and keep Windows Setup configuration failures independent of boot-loader repair.

      • Prevent incompatible EFI bootloader installation when Secure Boot is enabled. Refresh the Windows Boot Manager copy from compatible Windows files.

      • Warn when installed boot components need CA migration and prompt users to recreate the Rescue Disk after bootloader certificate changes.

      • Correct dismount status reporting and drive removal notifications, including command line dismounts. (GH #1852)

      • Prevent repeated errors when a favorite set to mount on device arrival has a drive letter already occupied by another device.

      • Update stored favorite volume PIM/KDF metadata after password or header KDF changes.

      • Fix Argon2 and Argon2id command line aliases, and accept n to disable /protectScreen and /protectMemory.

      • Fix windows and dialogs appearing off screen or on the wrong monitor. (GH #1858, GH #1865, GH #1912)

      • Fix favorite labels containing XML characters and prevent label text from changing saved mount options. (GH #1946)

      • Preserve Unicode paths and literal XML entity text in saved settings. Prevent extra carriage returns from accumulating when configuration files are rewritten.

      • Fix partially translated interfaces and untranslated menu items and benchmark controls. (GH #1587, GH #1929, GH #1930)

      • Update bundled zlib to 1.3.2 and LZMA SDK to 26.02.

      • Favorite labels when downgrading: Back up your ordinary and system favorite volume configuration files before downgrading. Older versions can display XML escapes in labels and keep that text when saving, even after you upgrade again. Restore your backups or correct the labels after returning to this version.

      • Upgrade note for system encryption: Install the updated VeraCrypt before preparing a Windows feature update, and resolve any Windows update support or original loader backup warning. If Windows Setup has already staged support files, restart feature-update preparation so it stages the updated files; installing VeraCrypt does not replace a previously staged script. Preserve existing recovery backups and a known trustworthy VeraCrypt Rescue Disk. Changing an old backup's ownership or permissions does not establish that its contents are safe.

    • Linux, macOS and BSD:

      • Security: Fix GHSA-4j3p-7hp7-xw73: prevent a heap buffer overflow, out-of-bounds reads and excessive memory allocations when deserializing requests in the privileged service.

      • Security: Prevent privileged-service communication and authentication file descriptors from leaking into child processes.

      • Detect CPU features before starting core services so mounted volumes use available hardware acceleration. Correct failed instruction probes on older processors. (GH #1939)

      • Preserve forced read-only protection when mounting partially encrypted system volumes through FUSE.

      • Make unattended unmount commands return a nonzero exit status when a busy volume can't be unmounted.

      • Support doas when sudo isn't available, including opendoas on FreeBSD. Avoid repeated password prompts after successful authentication.

      • Preserve hidden volume protection when mounting favorites, including during credential retries. Keep each favorite's mount options separate.

      • Cache the credentials actually used to mount a volume and preserve cancellation and other non-credential errors during automatic backup-header retries.

      • Reject missing, oversized or incorrectly encoded --stdin passwords instead of silently using an empty or truncated password. Decode the complete first line using the current locale. (GH #1935)

      • Require confirmation before replacing an existing container file during command line creation. Use --force to allow replacement without a prompt. (GH #1861)

      • Honor --no-size-check during command line container creation. (GH #1756)

      • Expose BLAKE2b-512 in random-pool, keyfile-generation and hash-benchmark dialogs, including when using Argon2id.

      • Preserve paths containing XML special characters and literal XML entity text in favorites, volume history and settings. (GH #1943)

      • Fall back to English when a language file is unusable, and fix password-length warnings and busy-volume dismount confirmation messages. (GH #1944)

    • Linux and FreeBSD:

      • Security: Fix GHSA-wf3r-pjv3-fcxx: a generic installer vulnerability could let a separate local user replace the embedded package and gain root privileges. Distribution packages and AppImage builds aren't affected.
      • Improve volume-file and tray icons, and make desktop cache updates optional when the required utilities aren't installed.
    • Linux:

      • Enforce read-only protection on loop devices, all device-mapper layers and filesystems. Automatically mount volumes as read only when the backing block device reports write protection, even if it permits an open request with write access.
      • Forward sync requests for volumes mounted through FUSE to the backing file or device and report flush failures. Previously, a successful sync could leave data in the host cache.
      • Check that devices belong to the selected volume before dismount or filesystem checks. Leave externally supplied host devices attached and refuse normal dismount while a decrypted loop device remains in use.
      • Support writable volume files on shares that restrict root access, including GVfs and NFS with root_squash. (GH #23) Keep the share mounted and the user session active until dismount.
      • Improve mounting on minimal systems, including FAT and exFAT detection. Use FUSE automatically when dmsetup isn't installed. (GH #1898)
      • Support NixOS helper locations and report when launcher restrictions block administrator authentication. (GH #1911)
      • Rewrite mount.veracrypt in POSIX shell, honor read-only options and supported mount(8) flags, reject invalid options, and fix argument quoting. (GH #1895, GH #1928)
      • Fix installation on systems with a merged /usr layout. (GH #1764)
    • macOS:

      • Security: Fix GHSA-f3px-f8h2-fm4c: correct FUSE-T cleanup that could leave decrypted volumes accessible after dismount. Protect auxiliary mounts and report when service shutdown can't be confirmed.

      • Security: Validate disk device ownership changes and prefer trusted system utilities when running privileged operations. (GH #1758, GH #1790)

      • Fix mounting and dismounting crashes with macFUSE 5.3.3 and later. (GH #1887)

      • Fix Check Filesystem and Repair Filesystem so they operate on the selected volume and show their results in Terminal. (GH #1791)

      • Add a preference to disable screen protection, which remains enabled by default.

      • Improve disk-image discovery and avoid detaching unrelated disks when device numbers are reused after an external eject. Keep volume status updates responsive.

      • Upgrade note for FUSE-T users: When upgrading from VeraCrypt 1.26.29, dismount your volumes and restart macOS before using the updated build. Replacing the application doesn't end services that are already running.

    • FreeBSD:

      • Detect ARM64 AES and SHA-256 hardware acceleration while retaining software fallbacks.
    • OpenBSD:

      • Add FFS volume creation in the wizard and on the command line.
    • Building and packaging:

      • Fix builds with NOASM or NOSSE2, and Argon2 builds targeting x86-64-v3/v4 or XOP. (GH #1891, GH #1896, GH #1906)
      • Fix FreeBSD ARM builds and local Apple Silicon builds. (GH #1678, GH #1934) Restore Linux builds with GCC 4.4 and fix INDICATOR=1 tray-menu builds. (GH #1823)
      • Let wxWidgets builds follow the parent make's parallel job settings, including OpenWrt builds. (GH #1903)
      • Remove OpenWrt's Bash dependency and preserve SDK package selections. (GH #1932)
      • Improve macOS signing and notarization validation, and refresh app bundles before packaging.
      • Remove the MFC dependency from Windows driver resource compilation.

    Merged Pull Requests

    New Contributors

    Full Changelog: https://github.com/veracrypt/VeraCrypt/compare/VeraCrypt_1.26.29...VeraCrypt_1.26.30

    Downloads

    Detached GPG signatures are provided as sig links next to each download.

    Linux Debian/Ubuntu packages

    Linux RPM packages

  3. 1.26.29

    补丁

    OpenNavo 编辑 Homebrew 收录

    为非系统卷加入 Argon2id,并包含按平台列出的修复、功能和安全修复。

    所有系统
    为非系统卷加入 Argon2id,作为另一种 KDF。加固 XML 和 TLV 解析器,防范格式错误的输入。修复 GHSA-94c6-mgmv-mqc5 和 CVE-2026-53762。更新文档、翻译和简化后的徽标图标。
    Windows
    修复驱动程序蓝屏及 Windows 11 25H2 休眠崩溃。修复 GHSA-jjcr-75w7-58jp 和 CVE-2026-54073。支持新的 UEFI CA 2023 引导加载程序并增加挂载控制。
    其他系统
    Linux 增加 FUSE3、内核 NTFS 和可复现构建支持。改进 macOS FUSE-T、格式化和挂载恢复。修复 Linux 和 macOS 的卷大小估算及格式化问题。

    1.26.29 (2026 年 6 月 9 日): 所有操作系统: 为非系统卷加入 Argon2id,作为另一种内存困难型 KDF。 在用户界面和文档中使用“KDF”一词代替“PKCS-5 PRF”。 更改卷密码或仅更改卷标头 KDF 时,如果选择了不同的 KDF,且未明确指定新的 PIM,则使用所选 KDF 的默认 PIM。 更新徽标图标,改用不带额外标签文字的简化图标。 加固 XML 和 TLV 解析器,防范格式错误的输入。 安全:修复 GHSA-94c6-mgmv-mqc5 :非默认的 WOLFCRYPT=1 构建现在使用 wolfCrypt PBKDF2 而不是 HKDF,并遵循 VeraCrypt 的 PBKDF2 迭代次数。 由 https://github.com/vastblast 报告。 CVE-2026-53762 修复 CPU 功能检测和加密实现边缘情况,包括 AVX2/leaf 7 检测、BLAKE2s/Argon2 的无 SSE2 x86 回退路径、Camellia SSSE3 分派、Twofish x64 多块尾部处理以及 Whirlpool 对齐问题。 更新文档,包括 Argon2id/KDF 说明,并将 Windows/Unix 命令行用法拆分为不同页面。 更新翻译。 Windows: 修复影响 VeraCrypt 驱动程序的罕见 BSOD(蓝屏死机)问题。 修复全新安装 Windows 11 25H2 时的休眠崩溃。 安全:修复 GHSA-jjcr-75w7-58jp :隐藏卷快速格式化不再使用文件容器分配捷径(该捷径每隔 128 MiB 写入明文零扇区),从而保留合理否认性。 由 https://github.com/vastblast 报告。 该回归问题起于 1.26.6。 CVE-2026-54073 加固 Windows 驱动程序输入验证和崩溃转储筛选器处理(GH PR #1590)。 改进驱动程序 I/O 处理,包括更安全的请求完成、有序卷刷新屏障,以及更好的 VERIFY/TRIM 验证。 修复 PBKDF XSTATE 清理,并为 AES 汇编添加 Win64 展开元数据。 选择 KDF 自动检测时加快挂载速度。 允许选择基准测试对话框中包含哪些 KDF 算法。 可从等待对话框及新的 /cancelmount CLI 开关取消耗时较长的挂载操作,包括自动挂载扫描。 支持由 Microsoft UEFI CA 2023 签名的新 EFI 引导加载程序,同时保留 Microsoft UEFI CA 2011 支持。 改进 EFI 系统加密修复和升级处理,包括解密结束阶段卡住、Post-OOBE 修复、引导加载程序恢复验证,以及更清晰地报告引导加载程序缺失。 修复 EFI DcsProp 重写处理。 修复通过命令行卸载后残留的幽灵盘符(GH #337、GH #1426)。 修复收藏卷挂载竞争问题。 更改密码或标头 KDF 后,更新已存储的收藏卷 PIM/KDF 元数据。 修复提升权限的 COM 格式化驱动器验证和设备路径规范化(GH #1670)。 修复创建卷时的 ReFS 格式化问题。 修复 MSI traveler 磁盘创建(适用于 WHQL 签名驱动程序)、ARM64 MSI 构建、开始菜单文件夹升级,以及较新 SDK MSI 工具的发现问题。 增加 CLI 开关 /protectScreen ,以便在便携模式下禁用屏幕保护(参见文档)。 为 CLI 开关 /protectMemory 增加参数,以便在便携模式下禁用内存保护(参见文档)。 增加设置和 CLI 开关 /enableIME ,以便在 Secure Desktop 中启用输入法编辑器(IME)。 VeraCrypt 首选项改用选项卡控件,减少对话框杂乱程度和尺寸。 提供用于创建卷的 VeraCrypt C/C++ SDK( https://github.com/veracrypt/VeraCrypt-SDK )。 将 LZMA SDK 更新至版本 26.01。 Linux: 更新 Ubuntu 25.04 依赖项,要求使用 libwxgtk3.2-1t64 软件包。 增加针对 FUSE3 构建的支持。 增加 NTFS 挂载时选择内核 NTFS 驱动程序的功能,包括 --filesystem=kernel-ntfs 和 -m kernelntfs 。 现在, --filesystem=ntfs3 会固定使用内核 ntfs3 驱动程序,并绕过 mount.ntfs3 等挂载助手。 修复 AppImage 可移植性和语言加载问题,捆绑匹配的 FUSE 库,并允许 AppImage 文件名以任意大小写的“veracrypt”开头。 抑制多余的“已在运行”对话框,并将 GUI 实例锁存储在 XDG 路径下。 为过期卸载添加紧急清理。 并行执行标头 KDF 自动检测。 外部格式化时遵循 nokernelcrypto 。 在 WSL 上使用 Windows Explorer 打开已挂载卷。 支持可复现 Linux 构建,包括 SOURCE_DATE_EPOCH 处理、DEB/RPM 软件包和 Arch 软件包构建。 增加 OpenWrt 软件包构建和 QEMU 测试脚本。 修复 CMake 4 兼容性、CentOS 6 GCC 4.4 构建及 wxWidgets 相关构建问题。 Linux 和 macOS: 修复主界面列的初始宽度。 为普通文件容器启用快速格式化。容器使用 ftruncate() 设定大小,因此主机文件系统可能会在数据写入之前,将某些区域保留为未写入或稀疏状态。 修复 exFAT 外层卷的隐藏卷大小估算。 修复隐藏卷 FAT 大小限制处理。 修复 GUI 向导中隐藏文件容器错误的 2 TiB 限制。 显示卷创建的收尾阶段。 从卷创建向导的嵌套控件收集鼠标熵。 修复剩余的 wxWidgets sizer 标志。 macOS: 对 FUSE-T 辅助挂载使用 SMB 后端,并改进 FUSE-T SMB 元数据处理和挂载稳定性。 恢复已挂载卷的挂载点。 验证格式化向导的设备目标,并阻止绕过分区整盘别名的操作。 在需要时以提升权限运行 APFS 格式化程序,并准备 APFS 格式化程序的设备别名。 格式化卷时强制使用全新的 exFAT 布局。 修复密码字段中的 Command-A 。 链接 wxWidgets 3.2.10,并允许覆盖部署目标。 BSD: FreeBSD:静态 wxWidgets 构建与 iconv 链接。 OpenBSD:修复设备托管卷大小估算;挂载所有权和 FUSE 访问遵循 doas 用户;修复 CLI 构建和 PCSC 退出处理。

    范围:完整官方说明包含按平台区分的更改;Windows 和 Linux 的更改并不自动适用于 macOS 软件包。

    来源:https://veracrypt.io/en/Release Notes.html

  4. 1.26.28_beta4

    展开

    GitHub Release

    VeraCrypt 1.26.28 Beta4

    What's Changed

    New Contributors

    Full Changelog: https://github.com/veracrypt/VeraCrypt/compare/VeraCrypt_1.26.24...VeraCrypt_1.26.28_Beta4

  5. 1.26.28_beta3

    展开

    GitHub Release

    VeraCrypt 1.26.28 Beta3

    What's Changed

    New Contributors

    Full Changelog: https://github.com/veracrypt/VeraCrypt/compare/VeraCrypt_1.26.24...VeraCrypt_1.26.28_Beta3

  6. 1.26.28_beta2

    展开

    GitHub Release

    VeraCrypt 1.26.28 Beta2

    What's Changed

    New Contributors

    Full Changelog: https://github.com/veracrypt/VeraCrypt/compare/VeraCrypt_1.26.24...VeraCrypt_1.26.28_Beta2

  7. 1.26.28_beta

    展开

    GitHub Release

    VeraCrypt 1.26.28 Beta

    What's Changed

    New Contributors

    Full Changelog: https://github.com/veracrypt/VeraCrypt/compare/VeraCrypt_1.26.24...VeraCrypt_1.26.28_Beta

  8. 1.26.24

    展开

    OpenNavo 编辑 Homebrew 收录

    修复 macOS sudo 会话检查和匈牙利语翻译问题,新增命令行符号链接,调整界面术语和翻译,并修复大端平台上的 Whirlpool 实现。

    1.26.24 (2025 年 5 月 30 日): 所有操作系统: 修复大端平台上的 whirlpool 实现(GH #1529)。 在界面中将“Dismount All”改为“Unmount All”。新的快捷键为 ALT+u,取代 ALT+s。 加入社区贡献的中文和俄文 CHM 文档。 更新翻译。 Windows: 新增屏幕防护功能,防止截图和屏幕录制,默认启用。 可在安装时或通过 Performance/Driver Configuration 设置关闭此功能。 在 MSI 安装程序中加入复选框,用于控制内存防护和屏幕防护功能。 新增 MSI 安装程序命令行选项 DISABLEMEMORYPROTECTION 和 DISABLESCREENPROTECTION 以管理这些功能。 这两个选项接受以下值: 0 (启用)或 1 (禁用)。 示例用法: msiexec /i VeraCrypt_Setup_x64_1.26.24.msi DISABLESCREENPROTECTION=1 /qn REBOOT=ReallySuppress MSIRESTARTMANAGERCONTROL=Disable ACCEPTLICENSE=YES 修复同时启动多个 veracrypt.exe 实例时的竞态条件。 将 libzip 更新至 1.11.3 版。 Linux: 新增对 AppImage 打包和使用的支持。 修复检查 sudo 会话是否活动时未使用 true 命令绝对路径的问题。 修复匈牙利语翻译无法使用的问题。 改进通用安装程序脚本(GH #1514)。 当 /media 不可用时,新增将 /run/media/veracrypt 作为默认挂载前缀的支持(GH #1524)。 从 .deb/.rpm 软件包中移除 pcsclite 依赖,因为程序会在运行时动态检测并加载它。 macOS: 修复检查 sudo 会话是否活动时未使用 true 命令绝对路径的问题。 在 /usr/local/bin 创建 VeraCrypt 符号链接,以便从命令行使用。 修复匈牙利语翻译无法使用的问题。

    范围说明:完整官方说明包含平台特定的更改;Windows 和 Linux 的更改不自动适用于 macOS 软件包。

    来源:https://veracrypt.io/en/Release Notes.html

  9. 1.26.20

    展开

    OpenNavo 编辑 Homebrew 收录

    新增 ARM64 SHA-256 加速,更新翻译和术语,并修复 Windows、Linux 和 macOS 的问题。

    所有系统
    在 ARM64 上利用 CPU 指令加速 SHA-256。更新翻译;在界面和文档中将“Dismount”改为“Unmount”。
    Windows
    修复驱动程序回归问题:总是允许碎片整理并导致其他副作用。因用户报告稳定性问题,恢复此前的系统熵收集方法。
    Linux/macOS
    修复 Linux Mint 身份验证回归;sudo 会话检测现改用 /usr/bin/true。macOS 修复卷卸载问题和 wxWidgets 断言错误。

    1.26.20(2025 年 2 月 3 日)

    所有系统

    • 在 ARM64 平台上利用 CPU 指令实现 SHA-256 加速。
    • 更新翻译。
    • 按照 IT 标准,在整个界面和文档中将“Dismount”替换为“Unmount”。

    Windows

    • 修复驱动程序回归问题:该问题会始终允许碎片整理,并造成其他副作用。
    • 因用户报告稳定性问题,恢复此前的系统熵收集方法。

    Linux

    • 修复影响 Linux Mint 管理员密码身份验证的回归问题(GH #1473)。
    • 使用 /usr/bin/true 替代 /usr/bin/uptime 来检测活动的 sudo 会话。如果在 sudoers 中为 veracrypt 和 uptime 配置了 NOPASSWD,应改为使用 /usr/bin/true 而非 uptime。

    macOS

    • 修复导致卷无法卸载的回归问题(GH #1467)。
    • 解决与未定义开关 use-dummy-sudo-password 相关的 wxWidgets 3.2.6 断言错误(GH #1470)。

    官方说明包含特定平台的更改;Windows 和 Linux 的更改不一定适用于 macOS 软件包。

    来源:https://veracrypt.io/en/Release Notes.html

  10. 1.26.18

    展开

    GitHub Release Homebrew 收录

    Binaries for supported operating systems are also available at Sourceforge.

    Changes between 1.26.15 and 1.26.18 (20 January 2025):

    • All OSes:
      • Added support for SHA-256 x86 intrinsic to enhance the performance of PBKDF2-HMAC-SHA256.
      • Added support for AES hardware on ARM64 platforms (e.g. Windows ARM64, macOS on Apple Silicon Mx).
      • Updated translations
    • Windows:
      • Dropped support for Windows 32-bit.
      • Set Windows 10 October 2018 Update (version 1809) as the minimum supported version.
      • Reduce driver deadlock occurences under low-memory scenarios caused by re-entrant IRP completions.
      • Fixed failed EFI detection on some PCs where the BootOrder variable is not defined (proposed by @kriegste, GH #360).
      • Fixed "Access Denied" error when updating VeraCrypt using EXE setup following a Windows upgrade.
      • Fixed various issues affecting the EFI system encryption configuration editor.
      • Fixed regression in Traveler Disk creation (GH #886)
      • Replaced the deprecated CryptGenRandom with BCryptGenRandom for generating secure random bytes.
      • Use modern API to gather system entropy for random generation instead of obsolete ones.
      • Update LZMA SDK to version 24.09
      • Update libzip to version 1.11.2
    • Linux:
      • CVE-2024-54187: Added absolute paths when executing system binaries to prevent path hijacking (collaboration with SivertPL @__tfr)
      • CVE-2025-23021: Prevent mounting volumes on system directories and PATH (reported by SivertPL @__tfr)
      • Fixed an assertion issue with the wxWidgets library included in Ubuntu.
      • Improved directory-opening logic by prioritizing xdg-open and adding fallback mechanisms.
      • Ensure that volume exists before starting the mount operation.
      • Fix "Password too long" error message not expanded to include max length (GH #1456)
      • Simplify sudo session detection logic.
    • macOS:
      • CVE-2024-54187: Added absolute paths when executing system binaries to prevent path hijacking (collaboration with SivertPL @__tfr)
      • CVE-2025-23021: Prevent mounting volumes on system directories and PATH (reported by SivertPL @__tfr)
      • Disabled screen capture by default. Added the --allow-screencapture CLI switch to enable it if needed.
      • Ensure that volume exists before starting the mount operation.
      • Implement sudo session detection logic

    Contributors

    Full Changelog: https://github.com/veracrypt/VeraCrypt/compare/VeraCrypt_1.26.15...VeraCrypt_1.26.18

  11. 1.26.15

    展开

    GitHub Release

    VeraCrypt version 1.26.15 (Windows Hotfix)

    Binaries for supported operating systems are also available at Sourceforge.

    Changes between 1.26.14 and 1.26.15 (2 September 2024):

    • Windows:
      • Fix MSI install/uninstall issues:
        • Fixed error 1603 returned by MSI silent install when REBOOT=ReallySuppress is specified and a reboot is required.
        • Fixed missing documentation and language files from the MSI package.
        • Fixed MSI not installing new documentation and language files when upgrading from an EXE-based installation.
        • Fixed installation folder not being removed after MSI uninstall in some cases.
      • Fix regression during UEFI system decryption that caused the bootloader to persist.

    Full Changelog: https://github.com/veracrypt/VeraCrypt/compare/VeraCrypt_1.26.14...VeraCrypt_1.26.15

  12. 1.26.14

    展开

    GitHub Release Homebrew 收录

    Binaries for supported operating systems are also available at Sourceforge.

    Changes between 1.26.7 and 1.26.14 (25 August 2024):

    • All OSes:

      • Update translations and documentation.
      • Implement language selection settings in non-Windows versions.
      • Make codebase compatible with wxWidgets 3.3 in non-Windows versions.
      • Implement detection of volumes affected by XTS master key vulnerability and warn user about it.
      • Update mount failure error messages to mention removal of TrueCrypt support and old algorithms.
    • Windows:

      • Better fix for Secure Desktop issues under Windows 11 22H2.
        • IME is now disabled in Secure Desktop because it is known to cause issues.
      • VeraCrypt Expander: Fix expansion of volumes on disks with a sector size different from 512 (by skl0n6).
      • Fix writing wrong EFI System Encryption Advanced Options to registry.
      • Don't close Setup when exiting VeraCrypt process through system tray Exit menu.
      • Fix failure to format some disks (e.g., VHDX) caused by virtual partition offset not 4K aligned.
      • Fallback to absolute positioning when accessing disks if relative positioning fails.
      • Update zlib to version 1.3.1.
    • Linux:

      • Focus PIM field when selected (GH #1239).
      • Fix generic installation script on Konsole in Wayland (GH #1244).
      • Added the ability to build using wolfCrypt as the cryptographic backend. Disabled by default. (Contributed by wolfSSL, GH PR #1227).
      • Allows GUI to launch in a Wayland-only environment (GH #1264).
      • CLI: Don't initially re-ask PIM if it was already specified (GH #1288).
      • CLI: Fix incorrect max hidden volume size for file containers (GH #1338).
      • Enhance ASLR security of generic installer binaries by adding linked flag for old GCC version (reported by @morton-f on Sourceforge).
    • macOS:

      • Fix corrupted disk icon in main UI (GH #1218).
      • Fix near zero width PIM input box and simplify wxTextValidator logic (GH #1274).
      • Use correct Disk Utility location when "check filesystem" is ran (GH #1273).
      • Add support for FUSE-T as an alternative to MacFUSE (GH #1055).
    • FreeBSD:

      • Fix privilege escalation prompts not showing up (GH #1349).
      • Support automatic detection and mounting of ext2/3/4, exFAT, NTFS filesystems (GH #1350).
      • Use correct Disk Utility location when "check filesystem" is ran (GH #1273).

    New Contributors

    Full Changelog: https://github.com/veracrypt/VeraCrypt/compare/VeraCrypt_1.26.7...VeraCrypt_1.26.14

  13. 1.26.7

    展开

    GitHub Release Homebrew 收录

    Binaries for supported operating systems are also available at Sourceforge.

    Changes between 1.25.9 and 1.26.7 (1 October 2023) :

    • All OSes:
      • Security: Ensure that XTS primary key is different from the secondary key when creating volumes
      • Remove TrueCrypt Mode support. Version 1.25.9 can be used to mount or convert TrueCrypt volumes.
      • Complete removal of RIPEMD160 and GOST89 algorithms. Legacy volumes using any of them cannot be mounted by VeraCrypt anymore.
      • Add support for BLAKE2s as new PRF algorithm for both system encryption and standard volumes.
      • Introducing support for EMV banking smart cards as keyfiles for non-system volumes.
        • No need for a separate PKCS#11 module configuration.
        • Card PIN isn't required.
        • Generates secure keyfile content from unique, encoded data present on the banking card.
        • Supports all EMV standard-compliant banking cards.
        • Can be enabled in settings (go to Settings->Security Tokens).
        • Developed by a team of students from the Institut national des sciences appliquées de Rennes.
        • More details about the team and the project are available at https://projets-info.insa-rennes.fr/projets/2022/VeraCrypt/index_en.html.
      • When overwriting an existing file container during volume creation, add its current size to the available free space
      • Add Corsican language support. Update several translations.
      • Update documentation
    • Windows:
      • Officially, the minimum supported version is now Windows 10. VeraCrypt may still run on Windows 7 and Windows 8/8.1, but no active tests are done on these platforms.
      • EFI Bootloader:
        • Fix bug in PasswordTimeout value handling that caused it to be limited to 255 seconds.
        • Rescue Disk: enhance "Boot Original Windows Loader" by using embedded backup of original Windows loader if it is missing from disk
        • Addition of Blake2s and removal of RIPEMD160 & GOST89
      • Enable memory protection by default. Add option under Performance/Driver Configuration to disable it if needed.
        • Memory protection blocks non-admin processes from reading VeraCrypt memory
        • It may block Screen Readers (Accessibility support) from reading VeraCrypt UI, in which case it can be disabled
        • It can be disabled by setting registry value "VeraCryptEnableMemoryProtection" to 0 under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\veracrypt
      • Add process mitigation policy to prevent VeraCrypt from being injected by other processes
      • Minor enhancements to RAM Encryption implementation
      • Fix Secure Desktop issues under Windows 11 22H2
      • Implement support for mounting partially encrypted system partitions.
      • Fix false positive detection of new device insertion when Clear Encryption Keys option is enable (System Encryption case only)
      • Better implementation of Fast Create when creating file containers that uses UAC to request required privilege if not already held
      • Allow choosing Fast Create in Format Wizard UI when creating file containers
      • Fix formatting issues during volume creation on some machines.
      • Fix stall issue caused by Quick Format of large file containers
      • Add dropdown menu to Mount button to allow mounting without using the cache.
      • Possible workaround for logarithmic slowdown for Encrypt-In-Place on large volumes.
      • Make Expander first check file existence before proceeding further
      • Allow selecting size unit (KB/MB/GB) for generated keyfiles
      • Display full list of supported cluster sizes for NTFS, ReFS and exFAT filesystems when creating volumes
      • Support drag-n-drop of files and keyfiles in Expander.
      • Implement translation of Expander UI
      • Replace legacy file/dir selection APIs with modern IFileDialog interface for better Windows 11 compatibility
      • Enhancements to dependency dlls safe loading, including delay loading.
      • Remove recommendation of keyfiles files extensions and update documentation to mention risks of third-party file extensions.
      • Add support for more language in the setup installer
      • Update LZMA library to version 23.01
      • Update libzip to version 1.10.1 and zlib to version 1.3.
      • Linux:
        • Fix bug in Random generator on Linux when used with Blake2s that was triggering a self test failure.
        • Modify Random Generator on Linux to exactly match official documentation and the Windows implementation.
        • Fix compatibility issues with Ubuntu 23.04.
        • Fix assert messages displayed when using wxWidgets 3.1.6 and newer.
        • Fix issues launching fsck on Linux.
        • Fix privilege escalation prompts being ignored.
        • Fix wrong size for hidden volume when selecting the option to use all free space.
        • Fix failure to create hidden volume on a disk using CLI caused by wrong maximum size detection.
        • Fix various issues when running in Text mode:
          • Don't allow selecting exFAT/BTRFS filesytem if they are not present or not compatible with the created volume.
          • Fix wrong dismount message displayed when mounting a volume.
          • Hide PIM during entry and re-ask PIM when user entered a wrong value.
          • Fix printing error when checking free space during volume creation in path doesn't exist.
        • Use wxWidgets 3.2.2.1 for static builds (e.g. console only version)
        • Fix compatibility of generic installers with old Linux distros
        • Update help message to indicate that when cascading algorithms they must be separated by dash
        • Better compatibility with building under Alpine Linux and musl libc
      • macOS:
        • Fix issue of VeraCrypt window becoming unusable in use cases involving multiple monitors and change in resolution.
  14. 1.25.9

    展开

    GitHub Release

    Binaries for FreeBSD, Linux, macOS and Windows are available at Launchpad and Sourceforge.

    Changes between 1.25.7 and 1.25.9 (19 February 2022) :

    • All OSes:

      • Update translations (Chinese, Dutch, French, German, Turkish).
    • Windows:

      • Make MSI installer compatible with system encryption (Issue #869).
      • Set minimum support for MSI installation to Windows 7.
      • Fix failure to create Traveler Disk when VeraCrypt is installed using MSI (Issue #886).
      • Don't cache the outer volume password when mounting with hidden volume protection if wrong hidden volume password was specified.
      • Reduce the size of EXE installers by almost 50% by using LZMA compression instead of DEFLATE.
      • Fix double-clicking mounted drive in VeraCrypt UI not working in some special Windows configurations (Issue #873).
      • Add registry key to fix BSOD during shutdown/reboot on some machines when using system encryption (Issue #871).
        • Under "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\veracrypt", create a REG_DWORD value named "VeraCryptEraseKeysShutdown".
        • Setting this registry value to 0 disables erasing system encryption keys which is the cause of BSOD during shutdown on some machines.
    • Linux:

      • Fix hidden volume settings not correctly displayed when enabling hidden volume protection in mount options window.
      • Fix generic Linux installer overwriting /usr/sbin if it is a symlink (Issue #888).
      • Fix crash when building with _GLIBCXX_ASSERTIONS defined (Issue #896).
      • Enable building from source without AES-NI support (Issue #892).
    • MacOSX:

      • Fix hidden volume settings not correctly displayed when enabling hidden volume protection in mount options window.
  15. 1.25.7

    展开

    GitHub Release

    Binaries for Windows and MacOSX are available at Launchpad and Sourceforge.

    Changes between 1.25.4 and 1.25.7 (7 January 2022) :

    • All OSes:

      • Update translations.
    • Windows:

      • Restore support of Windows Vista, Windows 7 and Windows 8/8.1.
        • Windows 7 support requires that either KB3033929 or KB4474419 is installed.
        • Windows Vista support requires that either KB4039648 or KB4474419 is installed.
      • MSI installation only: Fix double-clicking .hc file container inserting %1 instead of volume name in path field.
      • Advanced users: Add registry settings to control driver internal encryption queue to allow tuning performance for SSD disks and having better stability under heavy load.
        • Under registry key HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\veracrypt:
          • VeraCryptEncryptionFragmentSize (REG_DWORD): size of encryption data fragment in KiB. Default is 256. Maximum is 2048.
          • VeraCryptEncryptionIoRequestCount (REG_DWORD): maximum number of parallel I/O requests. Default is 16. Maximum is 8192.
          • VeraCryptEncryptionItemCount (REG_DWORD): maximum number of encryption queue items processed in parallel. Default as well as maximum is half of VeraCryptEncryptionIoRequestCount.
        • The triplet (FragmentSize=512, IoRequestCount=128, ItemCount=64) is an example of parameters that enhance sequential read speed on some SSD NVMe systems.
      • Fix truncate text in installer for some languages.
    • MacOSX:

      • Fix resource files inside VeraCrypt application bundle (e.g. HTML documentation, languages XML files) being world-writable. (Reported by Niall O'Reilly)
  16. 1.25.4

    展开

    GitHub Release

    Binaries for Windows, Linux and MacOSX are available at Launchpad and Sourceforge.

    Changes between 1.24-Update8 and 1.25.4 (3 December 2021) :

    • All OSes:

      • Speed optimization of Streebog.
      • Update translations.
    • Windows:

      • Add support for Windows on ARM64 (e.g. Microsoft Surface Pro X) but system encryption not yet supported.
      • Add MSI installer for silent mode deployment (ACCEPTLICENSE=YES must be set in msiexec command line).
        • For now, MSI installer cannot be used if system partition is encrypted with VeraCrypt
        • MSI installer requires Windows 10 or newer
      • Drop support of Windows Vista, Windows 7, Windows 8 and Windows 8.1 because of new requirement for driver code signing.
      • Reduce time of mount when PRF auto-detection is selected.
      • Fix potential memory corruption in driver caused by integer overflow in IOCTL_STORAGE_MANAGE_DATA_SET_ATTRIBUTES (reported by Ilja van Sprundel).
      • Replace insecure wcscpy/wcscat/strcpy runtime functions with secure equivalents.
      • Changes EFI Bootloader:
        • Fix memory leak in some cases caused by wrong check of pointer for calling MEM_FREE
        • Clear bootParams variable that may contain sensitive information when halting the system in case of fatal error
        • Add option "KeyboardInputDelay" in DcsProp to control the minimum delay supported between two key strokes
      • Try to workaround Windows Feature Updates issues with system encryption by fixing of bootloader and SetupConfig.ini when system resumes or when session is opened/unlocked
      • Fix failure to load local HTML documentation if application running with administrative privileges
      • Fix freeze when password dialog displayed in secure desktop and try to access token keyfiles protected by PIN
      • Fix failure to launch keyfile generator in secure desktop mode
      • Block Windows from resizing system partition if it is encrypted
      • Add keyboard shortcut to "TrueCrypt mode" in the mount dialog.
    • MacOSX:

      • Native support of Apple Silicon M1.
      • Drop official support of Mac OS X 10.7 Lion and Mac OS X 10.8 Mountain Lion.
      • Add UI language support using installed XML files. Language is automatically detected using "LANG" environment variable.
      • Add CLI switch (--size=max) and UI option to give a file container all available free space on the disk where it is created.
      • Return error if unknown filesystem value specified in CLI --filesystem switch instead of silently skipping filesystem creation.
    • Linux:

      • Add UI language support using installed XML files. Language is automatically detected using "LANG" environment variable
      • Compatiblity with with pam_tmpdir.
      • Display icon in notification area on Ubuntu 18.04 and newer (contibuted by https://unit193.net/).
      • Add CLI switch (--size=max) and UI option to give a file container all available free space on the disk where it is created.
      • Return error if unknown filesystem value specified in CLI --filesystem switch instead of silently skipping filesystem creation.
    • FreeBSD:

      • Make system devices work under FreeBSD
      • Add CLI switch (--size=max) and UI option to give a file container all available free space on the disk where it is created.
      • Return error if unknown filesystem value specified in CLI --filesystem switch instead of silently skipping filesystem creation.
    • OpenBSD:

      • Add basic support of OpenBSD
      • Add CLI switch (--size=max) and UI option to give a file container all available free space on the disk where it is created.
      • Return error if unknown filesystem value specified in CLI --filesystem switch instead of silently skipping filesystem creation.
  17. 1.24-update7

    展开

    GitHub Release

    VeraCrypt version 1.24-Update7

    Binaries for Windows, Linux and MacOSX are available at Launchpad and Sourceforge.

    Changes between 1.24-Update6 and 1.24-Update7 (7 August 2020) :

    • Windows:

      • Fix regression in Expander and Format when RAM encryption is enable that was causing volume headers to be corrupted.
    • All OSes:

      • Don't allow Hidden volume to have the same password, PIM and keyfiles as Outer volume
      • Fix random crash in 32-bit builds when using Streebog.
      • Enable FIPS mode in JitterEntropy random generator.
      • Update Beginner's Tutorial in documentation to use "MyVolume.hc" instead of "My Volume" for file container name in order to avoid confusion about nature of file nature.
      • Minor code cleanup
    • Windows:

      • Fix wrong results in benchmark of encryption algorithms when RAM encryption is enabled
      • Fix issue when RAM encryption used, AES selected and AES-NI not supported by CPU that caused the free space of newly created volumes not filled with random data even if "quick format" is not selected.
      • Fix UI for blocking TRIM in system encryption not working in MBR boot mode.
      • Support password drag-n-drop from external applications (e.g. KeePass) to password UI fields which is more secure than using clipboard.
      • Implements compatibility with Windows 10 Modern Standby and Windows 8.1 Connected Standby power model. This makes detection of entering power saving mode more reliable.
      • Avoid displaying waiting dialog when /silent specified for "VeraCrypt Format" during creating of file container using /create switch and a filesystem other than FAT.
      • Use native Windows format program to perform formatting of volume since it is more reliable and only fallback to FormatEx function from fmifs.dll in case of issue.
      • Don't use API for Processor Groups support if there is only 1 CPU group in the system. This can fix slowness issue observed on some PCs with AMD CPUs.
      • Don't allow to encrypt the system drive if it is already encrypted by BitLocker.
      • Implement detection of Hibernate and Fast Startup and disable them if RAM encryption is activated.
      • Warn about Fast Startup if it is enabled during VeraCrypt installation/upgrade, when starting system encryption or when creating a volume, and propose to disable it.
      • Add UI options to control the behavior of automatic bootloader fixing when System Encryption used.
      • Don't allow a directory path to be entered for the file container to be created in Format wizard.
      • Don't try to use fix for CVE-2019-19501 if Windows Shell has been modified or is not running since there is no reliable way to fix it in such non standard configuation.
      • MBR bootloader: fix incorrect compressed data size passed to decompressor in boot sector.
      • Add warning message when typed password reaches maximum length during the system encryption wizard.
      • Fix wrong error message when UTF-8 encoding of entered password exceeds the maximum supported length.
      • Fix crash when using portable 32-bit "VeraCrypt Format.exe" to create hidden volume on a 64-bit machine where VeraCrypt is already installed.
      • Update libzip to latest version 1.7.3.
      • Update translations.
    • Linux/MacOSX:

      • Force reading of at least 32 bytes from /dev/random before allowing it to fail gracefully
      • Allow choosing a filesystem other than FAT for Outer volume but display warning about risks of such choice. Implement an estimation of maximum possible size of hidden volume in this case.
      • Erase sensitive memory explicitly instead of relying on the compiler not optimizing calls to method Memory::Erase.
      • Add support for Btrfs filesystem when creating volumes (Linux Only).
      • Update wxWidgets for static builds to version 3.0.5.
  18. 1.24-update6

    展开

    GitHub Release

    VeraCrypt version 1.24-Update6 (Windows Only)

    Binaries for Windows are available at Launchpad, Sourceforge and Bitbucket

    Changes between 1.24-Update5 and 1.24-Update6 (10 March 2020) :

    • Windows:
      • Fix PIM label text truncation in password dialog
      • Fix wrong language used in installer if user selects a language other than English and then selects English before clicking OK on language selection dialog.
  19. 1.24-update5

    展开

    GitHub Release

    VeraCrypt version 1.24-Update5 (Windows Only)

    Binaries for Windows are available at Launchpad, Sourceforge and Bitbucket

    Changes between 1.24-Update4 and 1.24-Update5 (9 March 2020) :

    • Windows:
      • Optimize performance for CPUs that have more than 64 logical processors (contributed by Sachin Keswani from AMD)
      • Support specifying keyfiles (both in tokens and in filesystem) when creating file containers using command line (switches /keyfile, /tokenlib and /tokenpin supported in VeraCrypt Format)
      • Fix leak of keyfiles path and name after VeraCrypt process exits.
      • Add CLI switch /secureDesktop to VeraCrypt Format.
      • Update libzip to version 1.6.1
      • Minor UI fixes
  20. 1.24-update4

    展开

    GitHub Release

    VeraCrypt version 1.24-Update4

    Binaries for Windows, Linux and MacOSX are available at Launchpad, Sourceforge and Bitbucket

    Changes between 1.24-Update2 and 1.24-Update4 (23 January 2020) :

    • Windows:

      • Fix regression in Expander and Format when RAM encryption is enable that was causing volume headers to be corrupted.
      • Fix failure of Screen Readers (Accessibility support) to read UI by disabling newly introduced memory protection by default and adding a CLI switch (/protectMemory) to enable it when needed.
      • Fix side effects related to the fix for CVE-2019-19501 which caused links in UI not to open.
      • Add switch /signalExit to support notifying WAITFOR Windows command when VeraCrypt.exe exits if /q was specified in CLI (cf documentation for usage).
      • Don't display mount/dismount examples in help dialog for command line in Format and Expander.
      • Documentation and translation updates.
    • Linux:

      • Fix console-only build to remove dependency on GTK that is not wanted on headless servers.
      • Fix regression that limited the size available for hidden volumes created on disk or partition.
    • MacOSX:

      • Fix regression that limited the size available for hidden volumes created on disk or partition.
  21. 1.24-update2

    展开

    GitHub Release

    VeraCrypt version 1.24-Update2

    Binaries for Windows, Linux and MacOSX are available at Launchpad, Sourceforge and Bitbucket

    Changes between 1.24-Hotfix1 and 1.24-Update2 (16 Decembre 2019) :

    • All OSs:

      • clear AES key from stack memory when using non-optimized implementation. Doesn't apply to VeraCrypt official build (Reported and fixed by Hanno Böck)
      • Update Jitterentropy RNG Library to version 2.2.0
      • Start following IEEE 1541 agreed naming of bytes (KiB, MiB, GiB, TiB, PiB).
      • Various documentation enhancements.
    • Windows:

      • Fix possible local privilege escalation vulnerability during execution of VeraCrypt Expander (CVE-2019-19501)
      • MBR bootloader:
        • workaround for SSD disks that don't allow write operations in BIOS mode with buffers less than 4096 bytes.
        • Don't restore MBR to VeraCrypt value if it is coming from a loader different from us or different from Microsoft one.
      • EFI bootloader:
        • Fix "ActionFailed" not working and add "ActionCancelled" to customize handling of user hitting ESC on password prompt
        • Fix F5 showing previous password after failed authentication attempt. Ensure that even wrong password value are cleared from memory.
      • Fix multi-OS boot compatibility by only setting VeraCrypt as first bootloader of the system if the current first bootloader is Windows one.
      • Add new registry flags for SystemFavoritesService to control updating of EFI BIOS boot menu on shutdown.
      • Allow system encrypted drive to be mounted in WindowsPE even if changing keyboard layout fails (reported and fixed by Sven Strickroth)
      • Enhancements to the mechanism preserving file timestamps, especially for keyfiles.
      • Fix RDRAND instruction not detected on AMD CPUs.
      • Detect cases where RDRAND is flawed (e.g. AMD Ryzen) to avoid using it if enabled by user.
      • Don't write extra 0x00 byte at the end of DcsProp file when modifying it through UI
      • Reduce memory usage of IOCTL_DISK_VERIFY handler used in disk verification by Windows.
      • Add switch /FastCreateFile for VeraCrypt Format.exe to speedup creation of large file container if quick format is selected.
      • Fix the checkbox for skipping verification of Rescue Disk not reflecting the value of /noisocheck switch specified in VeraCrypt Format command line.
      • check "TrueCrypt Mode" in password dialog when mounting a file container with .tc extension
      • Update XML languages files.
    • Linux:

      • Fix regression causing admin password to be requested too many times in some cases
      • Fix off by one buffer overflow in function Process::Execute (Reported and fixed by Hanno Böck)
      • Make sure password gets deleted in case of internal error when mounting volume (Reported and fixed by Hanno Böck)
      • Fix passwords using Unicode characters not recognized in text mode.
      • Fix failure to run VeraCrypt binary built for console mode on headless machines.
      • Add switch to force the use of legacy maximum password length (64 UTF8 bytes)
      • Add CLI switch (--use-dummy-sudo-password) to force use of old sudo behavior of sending a dummy password
      • During uninstall, output error message to STDERR instead of STDOUT for better compatibility with package managers.
      • Make sector size mismatch error when mounting disks more verbose.
      • Speedup SHA256 in 64-bit mode by using assembly code.
    • MacOSX:

      • Add switch to force the use of legacy maximum password length (64 UTF8 bytes)
      • Fix off by one buffer overflow in function Process::Execute (Reported and fixed by Hanno Böck)
      • Fix passwords using Unicode characters not recognized in text mode.
      • Make sector size mismatch error when mounting disks more verbose.
      • Speedup SHA256 in 64-bit mode by using assembly code.
  22. 1.24-hotfix1

    展开

    GitHub Release

    VeraCrypt version 1.24-Hotfix1

    Binaries for Windows, Linux and MacOSX are available at Launchpad, Sourceforge and Bitbucket

    Changes between 1.24 and 1.24-Hotfix1 (27 October 2019) :

    • All OSs:

      • Fix 1.24 regression that caused system favorites not to mount at boot if VeraCrypt freshly installed.
      • Fix failure to encrypt system if the current Windows username contains a Unicode non-ASCII character.
      • Make VeraCrypt Expander able to resume expansion of volumes whose previous expansion was aborted before it finishes.
      • Add "Quick Expand" option to VeraCrypt Expander to accelarate the expansion of large file containers.
      • Add several robustness checks and validation in case of system encryption to better handle some corner cases.
      • Minor UI and documentation changes.
    • Linux:

      • Workaround gcc 4.4.7 bug under CentOS 6 that caused VeraCrypt built under CentOS 6 to crash when Whirlpool hash is used.
      • Fix "incorrect password attempt" written to /var/log/auth.log when mounting volumes.
      • Fix dropping file in UI not showing its correct path , specifically under GTK-3.
      • Add missing JitterEntropy implementation/
    • MacOSX:

      • Fix some devices and partitions not showing in the device selection dialog under OSX 10.13 and newer.
      • Fix keyboard tab navigation between password fields in "Volume Password" page of volume creation wizard.
      • Add missing JitterEntropy implementation/
      • Support APFS filesystem for creation volumes.
      • Support Dark Mode.
  23. 1.24

    展开

    GitHub Release

    Binaries for Windows, Linux and MacOSX are available at Launchpad, Sourceforge and Bitbucket

    Changes between 1.23-Hotfix-2 and 1.24 (6 October 2019) :

    • All OSs:
      • Increase password maximum length to 128 bytes in UTF-8 encoding for non-system volumes.
      • Add option to use legacy maximum password length (64) instead of new one for compatibility reasons.
      • Use Hardware RNG based on CPU timing jitter "Jitterentropy" by Stephan Mueller as a good alternative to CPU RDRAND (http://www.chronox.de/jent.html)
      • Speed optimization of XTS mode on 64-bit machine using SSE2 (up to 10% faster).
      • Fix detection of CPU features AVX2/BMI2. Add detection of RDRAND/RDSEED CPU features. Detect Hygon CPU as AMD one.
    • Windows:
      • Implement RAM encryption for keys and passwords using ChaCha12 cipher, t1ha non-cryptographic fast hash and ChaCha20 based CSPRNG.
        • Available only on 64-bit machines.
        • Disabled by default. Can be enabled using option in UI.
        • Less than 10% overhead on modern CPUs.
        • Side effect: Windows Hibernate is not possible if VeraCrypt System Encryption is also being used.
      • Mitigate some memory attacks by making VeraCrypt applications memory inaccessible to non-admin users (based on KeePassXC implementation)
      • New security features:
        • Erase system encryption keys from memory during shutdown/reboot to help mitigate some cold boot attacks
        • Add option when system encryption is used to erase all encryption keys from memory when a new device is connected to the system.
        • Add new driver entry point that can be called by applications to erase encryption keys from memory in case of emergency.
      • MBR Bootloader: dynamically determine boot loader memory segment instead of hardcoded values (proposed by neos6464)
      • MBR Bootloader: workaround for issue affecting creation of hidden OS on some SSD drives.
      • Fix issue related to Windows Update breaking VeraCrypt UEFI bootloader.
      • Several enhancements and fixes for EFI bootloader:
        • Implement timeout mechanism for password input. Set default timeout value to 3 minutes and default timeout action to "shutdown".
        • Implement new actions "shutdown" and "reboot" for EFI DcsProp config file.
        • Enhance Rescue Disk implementation of restoring VeraCrypt loader.
        • Fix ESC on password prompt during Pre-Test not starting Windows.
        • Add menu entry in Rescue Disk that enables starting original Windows loader.
        • Fix issue that was preventing Streebog hash from being selected manually during Pre-Boot authentication.
        • If "VeraCrypt" folder is missing from Rescue Disk, it will boot PC directly from bootloader stored on hard drive
          • This makes it easy to create a bootable disk for VeraCrypt from Rescue Disk just by removing/renaming its "VeraCrypt" folder.
      • Add option (disabled by default) to use CPU RDRAND or RDSEED as an additional entropy source for our random generator when available.
      • Add mount option (both UI and command line) that allows mounting a volume without attaching it to the specified drive letter.
      • Update libzip to version 1.5.2
      • Do not create uninstall shortcut in startmenu when installing VeraCrypt. (by Sven Strickroth)
      • Enable selection of Quick Format for file containers creation. Separate Quick Format and Dynamic Volume options in the wizard UI.
      • Fix editor of EFI system encryption configuration file not accepting ENTER key to add new lines.
      • Avoid simultaneous calls of favorites mounting, for example if corresponding hotkey is pressed multiple times.
      • Ensure that only one thread at a time can create a secure desktop.
      • Resize some dialogs in Format and Mount Options to fix some text truncation issues with non-English languages.
      • Fix high CPU usage when using favorites and add switch to disable periodic check on devices to reduce CPU load.
      • Minor UI changes.
      • Updates and corrections to translations and documentation.
    • MacOSX:
      • Add check on size of file container during creation to ensure it's smaller than available free disk space. Add CLI switch --no-size-check to disable this check.
    • Linux:
      • Make CLI switch --import-token-keyfiles compatible with Non-Interactive mode.
      • Add check on size of file container during creation to ensure it's smaller than available free disk space. Add CLI switch --no-size-check to disable this check.