Перейти к содержимому

VeraCrypt История версий

AM Crypto · Шифрование дисков с открытым исходным кодом: файловые контейнеры и накопители, шифрование на лету, скрытые тома и интерфейс для macOS.

CaskБезопасность и конфиденциальность 12,2 тыс.
Главная
Команда установки
brew install --cask veracrypt
Установки за последние 30 дней
441
Приложение: место 444
Установки за последний год
4,6 тыс.
Всего за 365 дней
Последняя версия
1.26.31
Размер загрузки
21МБ
dmg
Частота обновлений
Раз в две недели
2 релиза за 30 дней
  1. 1.26.31

    ПоследняяИсправление

    Редакция OpenNavo Добавлено в Homebrew

    VeraCrypt 1.26.31 выпущен 2026-11-02. В Linux, macOS и BSD программы, запущенные VeraCrypt, больше не наследуют его каналы, файлы и устройства, а ожидание инструментов монтирования больше не зависает.

    • Безопасность: программы, запущенные VeraCrypt, больше не могут наследовать каналы между его интерфейсом и службой, что могло позволить им использовать активный сеанс администратора. Это расширяет защиту, добавленную в 1.26.30.
    • Безопасность: программы, запущенные VeraCrypt, больше не могут наследовать его открытые файлы, устройства и внутренние каналы.
    • Исправлены случаи, когда VeraCrypt мог зависать в ожидании системных инструментов для монтирования томов или открытия их в файловом менеджере. Улучшена обработка тайм-аутов для этих инструментов.
    • В примечаниях указано, что разрешение запускать VeraCrypt или его основную службу от имени root через sudo или doas даёт полные права root.
    • Исправлена проверка точки монтирования для ещё не существующих каталогов, включая пути с «..» или символическими ссылками.
    • Восстановлена совместимость с GCC 4.4 для сборок Unix GUI и консоли.
    • Улучшены заголовки диалогов пароля для длинных путей к томам: имя файла тома сохраняется, где это возможно, а заголовок адаптируется к изменению размера окна.
    • Этот же выпуск обновляет переводы и документацию во всех операционных системах и включает отдельные исправления для Windows, которые здесь не повторяются.
  2. 1.26.30

    Исправление

    Релиз GitHub Добавлено в Homebrew

    Downloads: Jump directly to installers, packages, source archives, checksums and signatures

    Changes between 1.26.29 and 1.26.30 (24 October 2026):

    • All OSes:

      • Security: Improve erasure of security token data and limit smart card responses to prevent hangs or excessive memory use.
      • Fix unintended reuse of the current PIM when switching KDFs in the password-change and header-KDF dialogs. The selected KDF's default PIM is now used unless a new PIM is explicitly specified.
      • Fix cryptographic errors on processors using big endian byte order. Prevent alignment crashes on affected processors, including 32 bit ARM. (GH #1899, GH #1908, GH #1909)
      • Fix ChaCha output when processing successive partial blocks.
      • Improve encryption worker error handling and wait for active work to finish before shutdown.
      • Update translations and correct missing entries, formatting placeholders and escaped punctuation.
      • Expand documentation for EFI Secure Boot certificate migration, KDF selection, supported operating systems and Windows builds.
    • Windows:

      • Security: Fix GHSA-w98h-pqh6-wfjj: insufficient protection of system encryption support files could enable local privilege escalation during a qualifying Windows feature update or tampering with the BIOS loader during restoration. Protect setup scripts, driver packages and recovery backups, and reject untrusted legacy backups and driver sources.

      • Security: Fix GHSA-9mgv-w2fw-3m78: prevent local disclosure of limited disk metadata.

      • Fix driver stability regressions reported with VeraCrypt 1.26.29 and improve cleanup during mounting and dismounting. Restore the previous I/O completion behavior and disable ordered flush barriers by default.

      • Handle processor state-save failures safely during key derivation and fix KDF worker completion and startup cleanup.

      • Improve system encryption setup and upgrade failure handling. Retain recovery backups during uninstall, warn when an encrypted system's original loader backup is unavailable, and keep Windows Setup configuration failures independent of boot-loader repair.

      • Prevent incompatible EFI bootloader installation when Secure Boot is enabled. Refresh the Windows Boot Manager copy from compatible Windows files.

      • Warn when installed boot components need CA migration and prompt users to recreate the Rescue Disk after bootloader certificate changes.

      • Correct dismount status reporting and drive removal notifications, including command line dismounts. (GH #1852)

      • Prevent repeated errors when a favorite set to mount on device arrival has a drive letter already occupied by another device.

      • Update stored favorite volume PIM/KDF metadata after password or header KDF changes.

      • Fix Argon2 and Argon2id command line aliases, and accept n to disable /protectScreen and /protectMemory.

      • Fix windows and dialogs appearing off screen or on the wrong monitor. (GH #1858, GH #1865, GH #1912)

      • Fix favorite labels containing XML characters and prevent label text from changing saved mount options. (GH #1946)

      • Preserve Unicode paths and literal XML entity text in saved settings. Prevent extra carriage returns from accumulating when configuration files are rewritten.

      • Fix partially translated interfaces and untranslated menu items and benchmark controls. (GH #1587, GH #1929, GH #1930)

      • Update bundled zlib to 1.3.2 and LZMA SDK to 26.02.

      • Favorite labels when downgrading: Back up your ordinary and system favorite volume configuration files before downgrading. Older versions can display XML escapes in labels and keep that text when saving, even after you upgrade again. Restore your backups or correct the labels after returning to this version.

      • Upgrade note for system encryption: Install the updated VeraCrypt before preparing a Windows feature update, and resolve any Windows update support or original loader backup warning. If Windows Setup has already staged support files, restart feature-update preparation so it stages the updated files; installing VeraCrypt does not replace a previously staged script. Preserve existing recovery backups and a known trustworthy VeraCrypt Rescue Disk. Changing an old backup's ownership or permissions does not establish that its contents are safe.

    • Linux, macOS and BSD:

      • Security: Fix GHSA-4j3p-7hp7-xw73: prevent a heap buffer overflow, out-of-bounds reads and excessive memory allocations when deserializing requests in the privileged service.

      • Security: Prevent privileged-service communication and authentication file descriptors from leaking into child processes.

      • Detect CPU features before starting core services so mounted volumes use available hardware acceleration. Correct failed instruction probes on older processors. (GH #1939)

      • Preserve forced read-only protection when mounting partially encrypted system volumes through FUSE.

      • Make unattended unmount commands return a nonzero exit status when a busy volume can't be unmounted.

      • Support doas when sudo isn't available, including opendoas on FreeBSD. Avoid repeated password prompts after successful authentication.

      • Preserve hidden volume protection when mounting favorites, including during credential retries. Keep each favorite's mount options separate.

      • Cache the credentials actually used to mount a volume and preserve cancellation and other non-credential errors during automatic backup-header retries.

      • Reject missing, oversized or incorrectly encoded --stdin passwords instead of silently using an empty or truncated password. Decode the complete first line using the current locale. (GH #1935)

      • Require confirmation before replacing an existing container file during command line creation. Use --force to allow replacement without a prompt. (GH #1861)

      • Honor --no-size-check during command line container creation. (GH #1756)

      • Expose BLAKE2b-512 in random-pool, keyfile-generation and hash-benchmark dialogs, including when using Argon2id.

      • Preserve paths containing XML special characters and literal XML entity text in favorites, volume history and settings. (GH #1943)

      • Fall back to English when a language file is unusable, and fix password-length warnings and busy-volume dismount confirmation messages. (GH #1944)

    • Linux and FreeBSD:

      • Security: Fix GHSA-wf3r-pjv3-fcxx: a generic installer vulnerability could let a separate local user replace the embedded package and gain root privileges. Distribution packages and AppImage builds aren't affected.
      • Improve volume-file and tray icons, and make desktop cache updates optional when the required utilities aren't installed.
    • Linux:

      • Enforce read-only protection on loop devices, all device-mapper layers and filesystems. Automatically mount volumes as read only when the backing block device reports write protection, even if it permits an open request with write access.
      • Forward sync requests for volumes mounted through FUSE to the backing file or device and report flush failures. Previously, a successful sync could leave data in the host cache.
      • Check that devices belong to the selected volume before dismount or filesystem checks. Leave externally supplied host devices attached and refuse normal dismount while a decrypted loop device remains in use.
      • Support writable volume files on shares that restrict root access, including GVfs and NFS with root_squash. (GH #23) Keep the share mounted and the user session active until dismount.
      • Improve mounting on minimal systems, including FAT and exFAT detection. Use FUSE automatically when dmsetup isn't installed. (GH #1898)
      • Support NixOS helper locations and report when launcher restrictions block administrator authentication. (GH #1911)
      • Rewrite mount.veracrypt in POSIX shell, honor read-only options and supported mount(8) flags, reject invalid options, and fix argument quoting. (GH #1895, GH #1928)
      • Fix installation on systems with a merged /usr layout. (GH #1764)
    • macOS:

      • Security: Fix GHSA-f3px-f8h2-fm4c: correct FUSE-T cleanup that could leave decrypted volumes accessible after dismount. Protect auxiliary mounts and report when service shutdown can't be confirmed.

      • Security: Validate disk device ownership changes and prefer trusted system utilities when running privileged operations. (GH #1758, GH #1790)

      • Fix mounting and dismounting crashes with macFUSE 5.3.3 and later. (GH #1887)

      • Fix Check Filesystem and Repair Filesystem so they operate on the selected volume and show their results in Terminal. (GH #1791)

      • Add a preference to disable screen protection, which remains enabled by default.

      • Improve disk-image discovery and avoid detaching unrelated disks when device numbers are reused after an external eject. Keep volume status updates responsive.

      • Upgrade note for FUSE-T users: When upgrading from VeraCrypt 1.26.29, dismount your volumes and restart macOS before using the updated build. Replacing the application doesn't end services that are already running.

    • FreeBSD:

      • Detect ARM64 AES and SHA-256 hardware acceleration while retaining software fallbacks.
    • OpenBSD:

      • Add FFS volume creation in the wizard and on the command line.
    • Building and packaging:

      • Fix builds with NOASM or NOSSE2, and Argon2 builds targeting x86-64-v3/v4 or XOP. (GH #1891, GH #1896, GH #1906)
      • Fix FreeBSD ARM builds and local Apple Silicon builds. (GH #1678, GH #1934) Restore Linux builds with GCC 4.4 and fix INDICATOR=1 tray-menu builds. (GH #1823)
      • Let wxWidgets builds follow the parent make's parallel job settings, including OpenWrt builds. (GH #1903)
      • Remove OpenWrt's Bash dependency and preserve SDK package selections. (GH #1932)
      • Improve macOS signing and notarization validation, and refresh app bundles before packaging.
      • Remove the MFC dependency from Windows driver resource compilation.

    Merged Pull Requests

    New Contributors

    Full Changelog: https://github.com/veracrypt/VeraCrypt/compare/VeraCrypt_1.26.29...VeraCrypt_1.26.30

    Downloads

    Detached GPG signatures are provided as sig links next to each download.

    Linux Debian/Ubuntu packages

    Linux RPM packages

  3. 1.26.29

    Исправление

    Редакция OpenNavo Добавлено в Homebrew

    Добавлен Argon2id для несистемных томов; приведены платформенные изменения и исправления безопасности.

    Все ОС
    Добавлен Argon2id как альтернативный KDF для несистемных томов.Усилена защита XML- и TLV-парсеров от некорректных данных.Исправлены GHSA-94c6-mgmv-mqc5 и CVE-2026-53762.Обновлены документация, переводы и упрощённые значки логотипа.
    Windows
    Исправлены BSOD драйвера и сбои гибернации Windows 11 25H2.Исправлены GHSA-jjcr-75w7-58jp и CVE-2026-54073.Добавлены загрузчики UEFI CA 2023 и средства управления монтированием.
    Другие ОС
    В Linux добавлены FUSE3, NTFS ядра и воспроизводимые сборки.Улучшены FUSE-T, форматирование и восстановление монтирования macOS.Исправлены проблемы размера и форматирования томов в Linux и macOS.

    1.26.29 (9 июня 2026 г.): Все ОС: Добавлен Argon2id как альтернативный устойчивый к атаке по памяти KDF для несистемных томов. В интерфейсе и документации используется термин «KDF» вместо «PKCS-5 PRF». При смене пароля тома или только KDF заголовка тома, если выбран другой KDF и новый PIM явно не задан, используется PIM по умолчанию для выбранного KDF. Значки логотипа заменены упрощёнными значками без дополнительного текста. Усилена защита XML- и TLV-парсеров от некорректных данных. Безопасность: исправлена GHSA-94c6-mgmv-mqc5 : нестандартные сборки WOLFCRYPT=1 теперь используют wolfCrypt PBKDF2 вместо HKDF и соблюдают число итераций PBKDF2 VeraCrypt. Сообщил https://github.com/vastblast CVE-2026-53762 Исправлены пограничные случаи обнаружения возможностей CPU и реализации криптографии, в том числе обнаружение AVX2/leaf 7, резервные пути BLAKE2s/Argon2 для x86 без SSE2, диспетчеризация Camellia SSSE3, обработка хвоста нескольких блоков Twofish x64 и выравнивание Whirlpool. Обновлена документация, включая сведения об Argon2id/KDF и разделение страниц использования командной строки для Windows/Unix. Обновлены переводы. Windows: Исправлена редкая проблема BSOD (синий экран смерти), затрагивавшая драйвер VeraCrypt. Исправлен сбой гибернации в новых установках Windows 11 25H2. Безопасность: исправлена GHSA-jjcr-75w7-58jp : быстрое форматирование скрытых томов больше не использует обходной механизм выделения файлового контейнера, который записывал открытые нулевые секторы с интервалом 128 MiB; это сохраняет правдоподобное отрицание. Сообщил https://github.com/vastblast Регрессия появилась в 1.26.6 CVE-2026-54073 Усилена проверка входных данных драйвера Windows и обработка фильтра дампов сбоя (GH PR #1590). Улучшена обработка ввода-вывода драйвера: более безопасное завершение запросов, упорядоченные барьеры сброса тома и улучшенная проверка VERIFY/TRIM. Исправлена очистка PBKDF XSTATE и добавлены метаданные Win64 unwind для ассемблера AES. Ускорено монтирование при выборе автоматического определения KDF. Добавлена возможность выбирать алгоритмы KDF для диалога тестирования производительности. Длительные операции монтирования можно отменять в диалоге ожидания и новым переключателем CLI /cancelmount , в том числе при сканировании автоматического монтирования. Добавлена поддержка новых загрузчиков EFI, подписанных Microsoft UEFI CA 2023; поддержка Microsoft UEFI CA 2011 сохранена. Улучшена обработка восстановления и обновления шифрования системы EFI, включая зависание завершения расшифровки, восстановление Post-OOBE, проверку восстановления загрузчика и более ясные сообщения об отсутствующем загрузчике. Исправлена обработка перезаписи EFI DcsProp . Исправлено появление фантомной буквы диска после размонтирования из командной строки (GH #337, GH #1426). Исправлена гонка при монтировании избранного тома. После смены пароля или KDF заголовка обновляются сохранённые метаданные PIM/KDF избранного тома. Исправлена проверка форматируемого диска при повышенных правах COM и нормализация пути устройства (GH #1670). Исправлено форматирование ReFS при создании тома. Исправлены создание MSI traveler-диска с драйверами WHQL, сборка MSI ARM64, обновление папок меню «Пуск» и обнаружение новых инструментов MSI SDK. Добавлен переключатель CLI /protectScreen , позволяющий отключить защиту экрана в переносном режиме (см. документацию). Для переключателя CLI /protectMemory добавлен аргумент, позволяющий отключить защиту памяти в переносном режиме (см. документацию). Добавлены настройка и переключатель CLI /enableIME для включения редактора метода ввода (IME) в Secure Desktop. В настройках VeraCrypt используются вкладки, чтобы уменьшить загромождённость и размер диалогового окна. Предоставлен VeraCrypt C/C++ SDK для создания томов ( https://github.com/veracrypt/VeraCrypt-SDK ). LZMA SDK обновлён до версии 26.01. Linux: Обновлена зависимость Ubuntu 25.04: теперь требуется пакет libwxgtk3.2-1t64. Добавлена поддержка сборки с FUSE3. Добавлен выбор встроенного в ядро драйвера NTFS для монтирования NTFS, включая параметры --filesystem=kernel-ntfs и -m kernelntfs . Теперь --filesystem=ntfs3 закрепляет драйвер ntfs3 ядра и обходит вспомогательные программы монтирования, например mount.ntfs3 . Исправлены переносимость AppImage и загрузка языков, добавлена соответствующая библиотека FUSE; имя файла AppImage теперь может начинаться с «veracrypt» в любом регистре. Отключён лишний диалог «уже запущено», блокировка экземпляра GUI хранится в путях XDG. Добавлена аварийная очистка устаревших размонтирований. Автоопределение KDF заголовка выполняется параллельно. При внешнем форматировании учитывается nokernelcrypto . В WSL смонтированные тома открываются через Windows Explorer. Добавлена поддержка воспроизводимых сборок Linux, включая обработку SOURCE_DATE_EPOCH, пакеты DEB/RPM и сборки пакетов Arch. Добавлены скрипты сборки пакета OpenWrt и тестов QEMU. Исправлены совместимость с CMake 4, сборки CentOS 6 GCC 4.4 и проблемы сборки, связанные с wxWidgets. Linux и macOS: Исправлена начальная ширина столбцов главного интерфейса. Для обычных файловых контейнеров включено быстрое форматирование. Размер контейнера задаётся с помощью ftruncate() , поэтому файловая система хоста может сохранять области незаписанными или разреженными до записи данных. Исправлена оценка размера скрытого тома для внешних томов exFAT. Исправлена обработка ограничения размера FAT для скрытых томов. Исправлено ошибочное ограничение 2 TiB для скрытых файловых контейнеров в мастере GUI. Показываются этапы завершения создания тома. Энтропия мыши собирается из вложенных элементов управления мастера создания томов. Исправлены оставшиеся флаги sizer wxWidgets. macOS: Для вспомогательных монтирований FUSE-T используется SMB-бэкенд; улучшена обработка метаданных FUSE-T SMB и стабильность монтирования. Восстанавливаются точки монтирования смонтированных томов. Проверяются цели устройств в мастере форматирования и блокируется обход через псевдоним целого диска с разделами. При необходимости форматировщик APFS запускается с повышенными правами; подготавливаются псевдонимы устройств форматировщика APFS. При форматировании томов принудительно задаётся новая разметка exFAT. Исправлена работа Command-A в полях пароля. Добавлена компоновка с wxWidgets 3.2.10 и возможность переопределять целевую платформу развёртывания. BSD: FreeBSD: статические сборки wxWidgets связываются с iconv. OpenBSD: исправлен размер томов на устройствах; для владения точками монтирования и доступа FUSE учитывается пользователь doas; исправлены сборка CLI и обработка завершения PCSC.

    Область действия: полные официальные примечания включают платформенные изменения; изменения Windows и Linux не распространяются автоматически на пакет macOS.

    Источник: https://veracrypt.io/en/Release Notes.html

  4. 1.26.28_beta4

    Развернуть

    Релиз GitHub

    VeraCrypt 1.26.28 Beta4

    What's Changed

    New Contributors

    Full Changelog: https://github.com/veracrypt/VeraCrypt/compare/VeraCrypt_1.26.24...VeraCrypt_1.26.28_Beta4

  5. 1.26.28_beta3

    Развернуть

    Релиз GitHub

    VeraCrypt 1.26.28 Beta3

    What's Changed

    New Contributors

    Full Changelog: https://github.com/veracrypt/VeraCrypt/compare/VeraCrypt_1.26.24...VeraCrypt_1.26.28_Beta3

  6. 1.26.28_beta2

    Развернуть

    Релиз GitHub

    VeraCrypt 1.26.28 Beta2

    What's Changed

    New Contributors

    Full Changelog: https://github.com/veracrypt/VeraCrypt/compare/VeraCrypt_1.26.24...VeraCrypt_1.26.28_Beta2

  7. 1.26.28_beta

    Развернуть

    Релиз GitHub

    VeraCrypt 1.26.28 Beta

    What's Changed

    New Contributors

    Full Changelog: https://github.com/veracrypt/VeraCrypt/compare/VeraCrypt_1.26.24...VeraCrypt_1.26.28_Beta

  8. 1.26.24

    Развернуть

    Редакция OpenNavo Добавлено в Homebrew

    Исправлены проверка sudo-сеанса и венгерские переводы в macOS, добавлена символическая ссылка для командной строки, обновлены термины и переводы, исправлена реализация Whirlpool на платформах с обратным порядком байтов.

    1.26.24 (30 мая 2025 г.): Все ОС: Исправлена реализация whirlpool на платформах с обратным порядком байтов (GH #1529). В интерфейсе «Dismount All» переименовано в «Unmount All». Вместо ALT+s используется новая клавиша быстрого доступа ALT+u. Добавлена предоставленная сообществом документация CHM на китайском и русском языках. Обновлены переводы. Windows: Добавлена защита экрана от снимков и записи, включённая по умолчанию. Эту функцию можно отключить при установке или в настройках Performance/Driver Configuration. В установщик MSI добавлены флажки для управления защитой памяти и экрана. Введены параметры командной строки DISABLEMEMORYPROTECTION и DISABLESCREENPROTECTION для управления этими функциями в установщике MSI. Оба параметра принимают значения 0 (включено) или 1 (отключено). Пример использования: msiexec /i VeraCrypt_Setup_x64_1.26.24.msi DISABLESCREENPROTECTION=1 /qn REBOOT=ReallySuppress MSIRESTARTMANAGERCONTROL=Disable ACCEPTLICENSE=YES Исправлены состояния гонки при одновременном запуске нескольких экземпляров veracrypt.exe. libzip обновлён до версии 1.11.3. Linux: Добавлена поддержка упаковки и использования AppImage. Исправлена проблема, из-за которой при проверке активности sudo-сеанса не использовался абсолютный путь команды true. Исправлена невозможность использовать венгерские переводы. Улучшены универсальные сценарии установщика (GH #1514). Добавлена поддержка /run/media/veracrypt в качестве префикса монтирования по умолчанию, если /media недоступен (GH #1524). Из пакетов .deb/.rpm удалена зависимость pcsclite, поскольку она динамически обнаруживается и загружается во время выполнения. macOS: Исправлена проблема, из-за которой при проверке активности sudo-сеанса не использовался абсолютный путь команды true. Для использования из командной строки в /usr/local/bin создаётся символическая ссылка VeraCrypt. Исправлена невозможность использовать венгерские переводы.

    Область действия: Полные официальные примечания содержат изменения для отдельных платформ; изменения Windows и Linux не распространяются автоматически на пакет macOS.

    Источник: https://veracrypt.io/en/Release Notes.html

  9. 1.26.20

    Развернуть

    Редакция OpenNavo Добавлено в Homebrew

    Добавлено ускорение SHA-256 на ARM64, обновлены переводы и терминология, исправлены проблемы Windows, Linux и macOS.

    Все ОС
    Добавлено ускорение SHA-256 на ARM64 с помощью инструкций CPU.
    Windows
    После жалоб на стабильность возвращён прежний способ сбора системной энтропии.
    Linux/macOS
    В macOS исправлено размонтирование томов и ошибка assertion в wxWidgets.

    1.26.20 (3 февраля 2025 г.)

    Все ОС

    • Добавлено ускорение SHA-256 на платформах ARM64 с использованием инструкций CPU.
    • Обновлены переводы.
    • В интерфейсе и документации «Dismount» заменено на «Unmount» в соответствии с IT-стандартами.

    Windows

    • Исправлена регрессия драйвера, из-за которой дефрагментация всегда разрешалась и возникали другие побочные эффекты.
    • После сообщений пользователей о проблемах со стабильностью восстановлен прежний способ сбора системной энтропии.

    Linux

    • Исправлена регрессия, влиявшая на аутентификацию паролем администратора в Linux Mint (GH #1473).
    • Для обнаружения активных sudo-сессий используется /usr/bin/true вместо /usr/bin/uptime. Если в sudoers настроен NOPASSWD для veracrypt и uptime, настройку следует изменить: использовать /usr/bin/true вместо uptime.

    macOS

    • Исправлена регрессия, препятствовавшая размонтированию томов (GH #1467).
    • Устранена ошибка assertion в wxWidgets 3.2.6, связанная с неопределённым переключателем use-dummy-sudo-password (GH #1470).

    Официальные примечания содержат изменения для отдельных платформ; изменения Windows и Linux не обязательно относятся к пакету macOS.

    Источник: https://veracrypt.io/en/Release Notes.html

    • Обновлены переводы; в интерфейсе и документации «Dismount» заменено на «Unmount».

    • Исправлена регрессия драйвера: дефрагментация всегда разрешалась и возникали побочные эффекты.

    • Исправлена регрессия аутентификации в Linux Mint; для обнаружения sudo-сессий применяется /usr/bin/true.

  10. 1.26.18

    Развернуть

    Релиз GitHub Добавлено в Homebrew

    Binaries for supported operating systems are also available at Sourceforge.

    Changes between 1.26.15 and 1.26.18 (20 January 2025):

    • All OSes:
      • Added support for SHA-256 x86 intrinsic to enhance the performance of PBKDF2-HMAC-SHA256.
      • Added support for AES hardware on ARM64 platforms (e.g. Windows ARM64, macOS on Apple Silicon Mx).
      • Updated translations
    • Windows:
      • Dropped support for Windows 32-bit.
      • Set Windows 10 October 2018 Update (version 1809) as the minimum supported version.
      • Reduce driver deadlock occurences under low-memory scenarios caused by re-entrant IRP completions.
      • Fixed failed EFI detection on some PCs where the BootOrder variable is not defined (proposed by @kriegste, GH #360).
      • Fixed "Access Denied" error when updating VeraCrypt using EXE setup following a Windows upgrade.
      • Fixed various issues affecting the EFI system encryption configuration editor.
      • Fixed regression in Traveler Disk creation (GH #886)
      • Replaced the deprecated CryptGenRandom with BCryptGenRandom for generating secure random bytes.
      • Use modern API to gather system entropy for random generation instead of obsolete ones.
      • Update LZMA SDK to version 24.09
      • Update libzip to version 1.11.2
    • Linux:
      • CVE-2024-54187: Added absolute paths when executing system binaries to prevent path hijacking (collaboration with SivertPL @__tfr)
      • CVE-2025-23021: Prevent mounting volumes on system directories and PATH (reported by SivertPL @__tfr)
      • Fixed an assertion issue with the wxWidgets library included in Ubuntu.
      • Improved directory-opening logic by prioritizing xdg-open and adding fallback mechanisms.
      • Ensure that volume exists before starting the mount operation.
      • Fix "Password too long" error message not expanded to include max length (GH #1456)
      • Simplify sudo session detection logic.
    • macOS:
      • CVE-2024-54187: Added absolute paths when executing system binaries to prevent path hijacking (collaboration with SivertPL @__tfr)
      • CVE-2025-23021: Prevent mounting volumes on system directories and PATH (reported by SivertPL @__tfr)
      • Disabled screen capture by default. Added the --allow-screencapture CLI switch to enable it if needed.
      • Ensure that volume exists before starting the mount operation.
      • Implement sudo session detection logic

    Contributors

    Full Changelog: https://github.com/veracrypt/VeraCrypt/compare/VeraCrypt_1.26.15...VeraCrypt_1.26.18

  11. 1.26.15

    Развернуть

    Релиз GitHub

    VeraCrypt version 1.26.15 (Windows Hotfix)

    Binaries for supported operating systems are also available at Sourceforge.

    Changes between 1.26.14 and 1.26.15 (2 September 2024):

    • Windows:
      • Fix MSI install/uninstall issues:
        • Fixed error 1603 returned by MSI silent install when REBOOT=ReallySuppress is specified and a reboot is required.
        • Fixed missing documentation and language files from the MSI package.
        • Fixed MSI not installing new documentation and language files when upgrading from an EXE-based installation.
        • Fixed installation folder not being removed after MSI uninstall in some cases.
      • Fix regression during UEFI system decryption that caused the bootloader to persist.

    Full Changelog: https://github.com/veracrypt/VeraCrypt/compare/VeraCrypt_1.26.14...VeraCrypt_1.26.15

  12. 1.26.14

    Развернуть

    Релиз GitHub Добавлено в Homebrew

    Binaries for supported operating systems are also available at Sourceforge.

    Changes between 1.26.7 and 1.26.14 (25 August 2024):

    • All OSes:

      • Update translations and documentation.
      • Implement language selection settings in non-Windows versions.
      • Make codebase compatible with wxWidgets 3.3 in non-Windows versions.
      • Implement detection of volumes affected by XTS master key vulnerability and warn user about it.
      • Update mount failure error messages to mention removal of TrueCrypt support and old algorithms.
    • Windows:

      • Better fix for Secure Desktop issues under Windows 11 22H2.
        • IME is now disabled in Secure Desktop because it is known to cause issues.
      • VeraCrypt Expander: Fix expansion of volumes on disks with a sector size different from 512 (by skl0n6).
      • Fix writing wrong EFI System Encryption Advanced Options to registry.
      • Don't close Setup when exiting VeraCrypt process through system tray Exit menu.
      • Fix failure to format some disks (e.g., VHDX) caused by virtual partition offset not 4K aligned.
      • Fallback to absolute positioning when accessing disks if relative positioning fails.
      • Update zlib to version 1.3.1.
    • Linux:

      • Focus PIM field when selected (GH #1239).
      • Fix generic installation script on Konsole in Wayland (GH #1244).
      • Added the ability to build using wolfCrypt as the cryptographic backend. Disabled by default. (Contributed by wolfSSL, GH PR #1227).
      • Allows GUI to launch in a Wayland-only environment (GH #1264).
      • CLI: Don't initially re-ask PIM if it was already specified (GH #1288).
      • CLI: Fix incorrect max hidden volume size for file containers (GH #1338).
      • Enhance ASLR security of generic installer binaries by adding linked flag for old GCC version (reported by @morton-f on Sourceforge).
    • macOS:

      • Fix corrupted disk icon in main UI (GH #1218).
      • Fix near zero width PIM input box and simplify wxTextValidator logic (GH #1274).
      • Use correct Disk Utility location when "check filesystem" is ran (GH #1273).
      • Add support for FUSE-T as an alternative to MacFUSE (GH #1055).
    • FreeBSD:

      • Fix privilege escalation prompts not showing up (GH #1349).
      • Support automatic detection and mounting of ext2/3/4, exFAT, NTFS filesystems (GH #1350).
      • Use correct Disk Utility location when "check filesystem" is ran (GH #1273).

    New Contributors

    Full Changelog: https://github.com/veracrypt/VeraCrypt/compare/VeraCrypt_1.26.7...VeraCrypt_1.26.14

  13. 1.26.7

    Развернуть

    Релиз GitHub Добавлено в Homebrew

    Binaries for supported operating systems are also available at Sourceforge.

    Changes between 1.25.9 and 1.26.7 (1 October 2023) :

    • All OSes:
      • Security: Ensure that XTS primary key is different from the secondary key when creating volumes
      • Remove TrueCrypt Mode support. Version 1.25.9 can be used to mount or convert TrueCrypt volumes.
      • Complete removal of RIPEMD160 and GOST89 algorithms. Legacy volumes using any of them cannot be mounted by VeraCrypt anymore.
      • Add support for BLAKE2s as new PRF algorithm for both system encryption and standard volumes.
      • Introducing support for EMV banking smart cards as keyfiles for non-system volumes.
        • No need for a separate PKCS#11 module configuration.
        • Card PIN isn't required.
        • Generates secure keyfile content from unique, encoded data present on the banking card.
        • Supports all EMV standard-compliant banking cards.
        • Can be enabled in settings (go to Settings->Security Tokens).
        • Developed by a team of students from the Institut national des sciences appliquées de Rennes.
        • More details about the team and the project are available at https://projets-info.insa-rennes.fr/projets/2022/VeraCrypt/index_en.html.
      • When overwriting an existing file container during volume creation, add its current size to the available free space
      • Add Corsican language support. Update several translations.
      • Update documentation
    • Windows:
      • Officially, the minimum supported version is now Windows 10. VeraCrypt may still run on Windows 7 and Windows 8/8.1, but no active tests are done on these platforms.
      • EFI Bootloader:
        • Fix bug in PasswordTimeout value handling that caused it to be limited to 255 seconds.
        • Rescue Disk: enhance "Boot Original Windows Loader" by using embedded backup of original Windows loader if it is missing from disk
        • Addition of Blake2s and removal of RIPEMD160 & GOST89
      • Enable memory protection by default. Add option under Performance/Driver Configuration to disable it if needed.
        • Memory protection blocks non-admin processes from reading VeraCrypt memory
        • It may block Screen Readers (Accessibility support) from reading VeraCrypt UI, in which case it can be disabled
        • It can be disabled by setting registry value "VeraCryptEnableMemoryProtection" to 0 under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\veracrypt
      • Add process mitigation policy to prevent VeraCrypt from being injected by other processes
      • Minor enhancements to RAM Encryption implementation
      • Fix Secure Desktop issues under Windows 11 22H2
      • Implement support for mounting partially encrypted system partitions.
      • Fix false positive detection of new device insertion when Clear Encryption Keys option is enable (System Encryption case only)
      • Better implementation of Fast Create when creating file containers that uses UAC to request required privilege if not already held
      • Allow choosing Fast Create in Format Wizard UI when creating file containers
      • Fix formatting issues during volume creation on some machines.
      • Fix stall issue caused by Quick Format of large file containers
      • Add dropdown menu to Mount button to allow mounting without using the cache.
      • Possible workaround for logarithmic slowdown for Encrypt-In-Place on large volumes.
      • Make Expander first check file existence before proceeding further
      • Allow selecting size unit (KB/MB/GB) for generated keyfiles
      • Display full list of supported cluster sizes for NTFS, ReFS and exFAT filesystems when creating volumes
      • Support drag-n-drop of files and keyfiles in Expander.
      • Implement translation of Expander UI
      • Replace legacy file/dir selection APIs with modern IFileDialog interface for better Windows 11 compatibility
      • Enhancements to dependency dlls safe loading, including delay loading.
      • Remove recommendation of keyfiles files extensions and update documentation to mention risks of third-party file extensions.
      • Add support for more language in the setup installer
      • Update LZMA library to version 23.01
      • Update libzip to version 1.10.1 and zlib to version 1.3.
      • Linux:
        • Fix bug in Random generator on Linux when used with Blake2s that was triggering a self test failure.
        • Modify Random Generator on Linux to exactly match official documentation and the Windows implementation.
        • Fix compatibility issues with Ubuntu 23.04.
        • Fix assert messages displayed when using wxWidgets 3.1.6 and newer.
        • Fix issues launching fsck on Linux.
        • Fix privilege escalation prompts being ignored.
        • Fix wrong size for hidden volume when selecting the option to use all free space.
        • Fix failure to create hidden volume on a disk using CLI caused by wrong maximum size detection.
        • Fix various issues when running in Text mode:
          • Don't allow selecting exFAT/BTRFS filesytem if they are not present or not compatible with the created volume.
          • Fix wrong dismount message displayed when mounting a volume.
          • Hide PIM during entry and re-ask PIM when user entered a wrong value.
          • Fix printing error when checking free space during volume creation in path doesn't exist.
        • Use wxWidgets 3.2.2.1 for static builds (e.g. console only version)
        • Fix compatibility of generic installers with old Linux distros
        • Update help message to indicate that when cascading algorithms they must be separated by dash
        • Better compatibility with building under Alpine Linux and musl libc
      • macOS:
        • Fix issue of VeraCrypt window becoming unusable in use cases involving multiple monitors and change in resolution.
  14. 1.25.9

    Развернуть

    Релиз GitHub

    Binaries for FreeBSD, Linux, macOS and Windows are available at Launchpad and Sourceforge.

    Changes between 1.25.7 and 1.25.9 (19 February 2022) :

    • All OSes:

      • Update translations (Chinese, Dutch, French, German, Turkish).
    • Windows:

      • Make MSI installer compatible with system encryption (Issue #869).
      • Set minimum support for MSI installation to Windows 7.
      • Fix failure to create Traveler Disk when VeraCrypt is installed using MSI (Issue #886).
      • Don't cache the outer volume password when mounting with hidden volume protection if wrong hidden volume password was specified.
      • Reduce the size of EXE installers by almost 50% by using LZMA compression instead of DEFLATE.
      • Fix double-clicking mounted drive in VeraCrypt UI not working in some special Windows configurations (Issue #873).
      • Add registry key to fix BSOD during shutdown/reboot on some machines when using system encryption (Issue #871).
        • Under "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\veracrypt", create a REG_DWORD value named "VeraCryptEraseKeysShutdown".
        • Setting this registry value to 0 disables erasing system encryption keys which is the cause of BSOD during shutdown on some machines.
    • Linux:

      • Fix hidden volume settings not correctly displayed when enabling hidden volume protection in mount options window.
      • Fix generic Linux installer overwriting /usr/sbin if it is a symlink (Issue #888).
      • Fix crash when building with _GLIBCXX_ASSERTIONS defined (Issue #896).
      • Enable building from source without AES-NI support (Issue #892).
    • MacOSX:

      • Fix hidden volume settings not correctly displayed when enabling hidden volume protection in mount options window.
  15. 1.25.7

    Развернуть

    Релиз GitHub

    Binaries for Windows and MacOSX are available at Launchpad and Sourceforge.

    Changes between 1.25.4 and 1.25.7 (7 January 2022) :

    • All OSes:

      • Update translations.
    • Windows:

      • Restore support of Windows Vista, Windows 7 and Windows 8/8.1.
        • Windows 7 support requires that either KB3033929 or KB4474419 is installed.
        • Windows Vista support requires that either KB4039648 or KB4474419 is installed.
      • MSI installation only: Fix double-clicking .hc file container inserting %1 instead of volume name in path field.
      • Advanced users: Add registry settings to control driver internal encryption queue to allow tuning performance for SSD disks and having better stability under heavy load.
        • Under registry key HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\veracrypt:
          • VeraCryptEncryptionFragmentSize (REG_DWORD): size of encryption data fragment in KiB. Default is 256. Maximum is 2048.
          • VeraCryptEncryptionIoRequestCount (REG_DWORD): maximum number of parallel I/O requests. Default is 16. Maximum is 8192.
          • VeraCryptEncryptionItemCount (REG_DWORD): maximum number of encryption queue items processed in parallel. Default as well as maximum is half of VeraCryptEncryptionIoRequestCount.
        • The triplet (FragmentSize=512, IoRequestCount=128, ItemCount=64) is an example of parameters that enhance sequential read speed on some SSD NVMe systems.
      • Fix truncate text in installer for some languages.
    • MacOSX:

      • Fix resource files inside VeraCrypt application bundle (e.g. HTML documentation, languages XML files) being world-writable. (Reported by Niall O'Reilly)
  16. 1.25.4

    Развернуть

    Релиз GitHub

    Binaries for Windows, Linux and MacOSX are available at Launchpad and Sourceforge.

    Changes between 1.24-Update8 and 1.25.4 (3 December 2021) :

    • All OSes:

      • Speed optimization of Streebog.
      • Update translations.
    • Windows:

      • Add support for Windows on ARM64 (e.g. Microsoft Surface Pro X) but system encryption not yet supported.
      • Add MSI installer for silent mode deployment (ACCEPTLICENSE=YES must be set in msiexec command line).
        • For now, MSI installer cannot be used if system partition is encrypted with VeraCrypt
        • MSI installer requires Windows 10 or newer
      • Drop support of Windows Vista, Windows 7, Windows 8 and Windows 8.1 because of new requirement for driver code signing.
      • Reduce time of mount when PRF auto-detection is selected.
      • Fix potential memory corruption in driver caused by integer overflow in IOCTL_STORAGE_MANAGE_DATA_SET_ATTRIBUTES (reported by Ilja van Sprundel).
      • Replace insecure wcscpy/wcscat/strcpy runtime functions with secure equivalents.
      • Changes EFI Bootloader:
        • Fix memory leak in some cases caused by wrong check of pointer for calling MEM_FREE
        • Clear bootParams variable that may contain sensitive information when halting the system in case of fatal error
        • Add option "KeyboardInputDelay" in DcsProp to control the minimum delay supported between two key strokes
      • Try to workaround Windows Feature Updates issues with system encryption by fixing of bootloader and SetupConfig.ini when system resumes or when session is opened/unlocked
      • Fix failure to load local HTML documentation if application running with administrative privileges
      • Fix freeze when password dialog displayed in secure desktop and try to access token keyfiles protected by PIN
      • Fix failure to launch keyfile generator in secure desktop mode
      • Block Windows from resizing system partition if it is encrypted
      • Add keyboard shortcut to "TrueCrypt mode" in the mount dialog.
    • MacOSX:

      • Native support of Apple Silicon M1.
      • Drop official support of Mac OS X 10.7 Lion and Mac OS X 10.8 Mountain Lion.
      • Add UI language support using installed XML files. Language is automatically detected using "LANG" environment variable.
      • Add CLI switch (--size=max) and UI option to give a file container all available free space on the disk where it is created.
      • Return error if unknown filesystem value specified in CLI --filesystem switch instead of silently skipping filesystem creation.
    • Linux:

      • Add UI language support using installed XML files. Language is automatically detected using "LANG" environment variable
      • Compatiblity with with pam_tmpdir.
      • Display icon in notification area on Ubuntu 18.04 and newer (contibuted by https://unit193.net/).
      • Add CLI switch (--size=max) and UI option to give a file container all available free space on the disk where it is created.
      • Return error if unknown filesystem value specified in CLI --filesystem switch instead of silently skipping filesystem creation.
    • FreeBSD:

      • Make system devices work under FreeBSD
      • Add CLI switch (--size=max) and UI option to give a file container all available free space on the disk where it is created.
      • Return error if unknown filesystem value specified in CLI --filesystem switch instead of silently skipping filesystem creation.
    • OpenBSD:

      • Add basic support of OpenBSD
      • Add CLI switch (--size=max) and UI option to give a file container all available free space on the disk where it is created.
      • Return error if unknown filesystem value specified in CLI --filesystem switch instead of silently skipping filesystem creation.
  17. 1.24-update7

    Развернуть

    Релиз GitHub

    VeraCrypt version 1.24-Update7

    Binaries for Windows, Linux and MacOSX are available at Launchpad and Sourceforge.

    Changes between 1.24-Update6 and 1.24-Update7 (7 August 2020) :

    • Windows:

      • Fix regression in Expander and Format when RAM encryption is enable that was causing volume headers to be corrupted.
    • All OSes:

      • Don't allow Hidden volume to have the same password, PIM and keyfiles as Outer volume
      • Fix random crash in 32-bit builds when using Streebog.
      • Enable FIPS mode in JitterEntropy random generator.
      • Update Beginner's Tutorial in documentation to use "MyVolume.hc" instead of "My Volume" for file container name in order to avoid confusion about nature of file nature.
      • Minor code cleanup
    • Windows:

      • Fix wrong results in benchmark of encryption algorithms when RAM encryption is enabled
      • Fix issue when RAM encryption used, AES selected and AES-NI not supported by CPU that caused the free space of newly created volumes not filled with random data even if "quick format" is not selected.
      • Fix UI for blocking TRIM in system encryption not working in MBR boot mode.
      • Support password drag-n-drop from external applications (e.g. KeePass) to password UI fields which is more secure than using clipboard.
      • Implements compatibility with Windows 10 Modern Standby and Windows 8.1 Connected Standby power model. This makes detection of entering power saving mode more reliable.
      • Avoid displaying waiting dialog when /silent specified for "VeraCrypt Format" during creating of file container using /create switch and a filesystem other than FAT.
      • Use native Windows format program to perform formatting of volume since it is more reliable and only fallback to FormatEx function from fmifs.dll in case of issue.
      • Don't use API for Processor Groups support if there is only 1 CPU group in the system. This can fix slowness issue observed on some PCs with AMD CPUs.
      • Don't allow to encrypt the system drive if it is already encrypted by BitLocker.
      • Implement detection of Hibernate and Fast Startup and disable them if RAM encryption is activated.
      • Warn about Fast Startup if it is enabled during VeraCrypt installation/upgrade, when starting system encryption or when creating a volume, and propose to disable it.
      • Add UI options to control the behavior of automatic bootloader fixing when System Encryption used.
      • Don't allow a directory path to be entered for the file container to be created in Format wizard.
      • Don't try to use fix for CVE-2019-19501 if Windows Shell has been modified or is not running since there is no reliable way to fix it in such non standard configuation.
      • MBR bootloader: fix incorrect compressed data size passed to decompressor in boot sector.
      • Add warning message when typed password reaches maximum length during the system encryption wizard.
      • Fix wrong error message when UTF-8 encoding of entered password exceeds the maximum supported length.
      • Fix crash when using portable 32-bit "VeraCrypt Format.exe" to create hidden volume on a 64-bit machine where VeraCrypt is already installed.
      • Update libzip to latest version 1.7.3.
      • Update translations.
    • Linux/MacOSX:

      • Force reading of at least 32 bytes from /dev/random before allowing it to fail gracefully
      • Allow choosing a filesystem other than FAT for Outer volume but display warning about risks of such choice. Implement an estimation of maximum possible size of hidden volume in this case.
      • Erase sensitive memory explicitly instead of relying on the compiler not optimizing calls to method Memory::Erase.
      • Add support for Btrfs filesystem when creating volumes (Linux Only).
      • Update wxWidgets for static builds to version 3.0.5.
  18. 1.24-update6

    Развернуть

    Релиз GitHub

    VeraCrypt version 1.24-Update6 (Windows Only)

    Binaries for Windows are available at Launchpad, Sourceforge and Bitbucket

    Changes between 1.24-Update5 and 1.24-Update6 (10 March 2020) :

    • Windows:
      • Fix PIM label text truncation in password dialog
      • Fix wrong language used in installer if user selects a language other than English and then selects English before clicking OK on language selection dialog.
  19. 1.24-update5

    Развернуть

    Релиз GitHub

    VeraCrypt version 1.24-Update5 (Windows Only)

    Binaries for Windows are available at Launchpad, Sourceforge and Bitbucket

    Changes between 1.24-Update4 and 1.24-Update5 (9 March 2020) :

    • Windows:
      • Optimize performance for CPUs that have more than 64 logical processors (contributed by Sachin Keswani from AMD)
      • Support specifying keyfiles (both in tokens and in filesystem) when creating file containers using command line (switches /keyfile, /tokenlib and /tokenpin supported in VeraCrypt Format)
      • Fix leak of keyfiles path and name after VeraCrypt process exits.
      • Add CLI switch /secureDesktop to VeraCrypt Format.
      • Update libzip to version 1.6.1
      • Minor UI fixes
  20. 1.24-update4

    Развернуть

    Релиз GitHub

    VeraCrypt version 1.24-Update4

    Binaries for Windows, Linux and MacOSX are available at Launchpad, Sourceforge and Bitbucket

    Changes between 1.24-Update2 and 1.24-Update4 (23 January 2020) :

    • Windows:

      • Fix regression in Expander and Format when RAM encryption is enable that was causing volume headers to be corrupted.
      • Fix failure of Screen Readers (Accessibility support) to read UI by disabling newly introduced memory protection by default and adding a CLI switch (/protectMemory) to enable it when needed.
      • Fix side effects related to the fix for CVE-2019-19501 which caused links in UI not to open.
      • Add switch /signalExit to support notifying WAITFOR Windows command when VeraCrypt.exe exits if /q was specified in CLI (cf documentation for usage).
      • Don't display mount/dismount examples in help dialog for command line in Format and Expander.
      • Documentation and translation updates.
    • Linux:

      • Fix console-only build to remove dependency on GTK that is not wanted on headless servers.
      • Fix regression that limited the size available for hidden volumes created on disk or partition.
    • MacOSX:

      • Fix regression that limited the size available for hidden volumes created on disk or partition.
  21. 1.24-update2

    Развернуть

    Релиз GitHub

    VeraCrypt version 1.24-Update2

    Binaries for Windows, Linux and MacOSX are available at Launchpad, Sourceforge and Bitbucket

    Changes between 1.24-Hotfix1 and 1.24-Update2 (16 Decembre 2019) :

    • All OSs:

      • clear AES key from stack memory when using non-optimized implementation. Doesn't apply to VeraCrypt official build (Reported and fixed by Hanno Böck)
      • Update Jitterentropy RNG Library to version 2.2.0
      • Start following IEEE 1541 agreed naming of bytes (KiB, MiB, GiB, TiB, PiB).
      • Various documentation enhancements.
    • Windows:

      • Fix possible local privilege escalation vulnerability during execution of VeraCrypt Expander (CVE-2019-19501)
      • MBR bootloader:
        • workaround for SSD disks that don't allow write operations in BIOS mode with buffers less than 4096 bytes.
        • Don't restore MBR to VeraCrypt value if it is coming from a loader different from us or different from Microsoft one.
      • EFI bootloader:
        • Fix "ActionFailed" not working and add "ActionCancelled" to customize handling of user hitting ESC on password prompt
        • Fix F5 showing previous password after failed authentication attempt. Ensure that even wrong password value are cleared from memory.
      • Fix multi-OS boot compatibility by only setting VeraCrypt as first bootloader of the system if the current first bootloader is Windows one.
      • Add new registry flags for SystemFavoritesService to control updating of EFI BIOS boot menu on shutdown.
      • Allow system encrypted drive to be mounted in WindowsPE even if changing keyboard layout fails (reported and fixed by Sven Strickroth)
      • Enhancements to the mechanism preserving file timestamps, especially for keyfiles.
      • Fix RDRAND instruction not detected on AMD CPUs.
      • Detect cases where RDRAND is flawed (e.g. AMD Ryzen) to avoid using it if enabled by user.
      • Don't write extra 0x00 byte at the end of DcsProp file when modifying it through UI
      • Reduce memory usage of IOCTL_DISK_VERIFY handler used in disk verification by Windows.
      • Add switch /FastCreateFile for VeraCrypt Format.exe to speedup creation of large file container if quick format is selected.
      • Fix the checkbox for skipping verification of Rescue Disk not reflecting the value of /noisocheck switch specified in VeraCrypt Format command line.
      • check "TrueCrypt Mode" in password dialog when mounting a file container with .tc extension
      • Update XML languages files.
    • Linux:

      • Fix regression causing admin password to be requested too many times in some cases
      • Fix off by one buffer overflow in function Process::Execute (Reported and fixed by Hanno Böck)
      • Make sure password gets deleted in case of internal error when mounting volume (Reported and fixed by Hanno Böck)
      • Fix passwords using Unicode characters not recognized in text mode.
      • Fix failure to run VeraCrypt binary built for console mode on headless machines.
      • Add switch to force the use of legacy maximum password length (64 UTF8 bytes)
      • Add CLI switch (--use-dummy-sudo-password) to force use of old sudo behavior of sending a dummy password
      • During uninstall, output error message to STDERR instead of STDOUT for better compatibility with package managers.
      • Make sector size mismatch error when mounting disks more verbose.
      • Speedup SHA256 in 64-bit mode by using assembly code.
    • MacOSX:

      • Add switch to force the use of legacy maximum password length (64 UTF8 bytes)
      • Fix off by one buffer overflow in function Process::Execute (Reported and fixed by Hanno Böck)
      • Fix passwords using Unicode characters not recognized in text mode.
      • Make sector size mismatch error when mounting disks more verbose.
      • Speedup SHA256 in 64-bit mode by using assembly code.
  22. 1.24-hotfix1

    Развернуть

    Релиз GitHub

    VeraCrypt version 1.24-Hotfix1

    Binaries for Windows, Linux and MacOSX are available at Launchpad, Sourceforge and Bitbucket

    Changes between 1.24 and 1.24-Hotfix1 (27 October 2019) :

    • All OSs:

      • Fix 1.24 regression that caused system favorites not to mount at boot if VeraCrypt freshly installed.
      • Fix failure to encrypt system if the current Windows username contains a Unicode non-ASCII character.
      • Make VeraCrypt Expander able to resume expansion of volumes whose previous expansion was aborted before it finishes.
      • Add "Quick Expand" option to VeraCrypt Expander to accelarate the expansion of large file containers.
      • Add several robustness checks and validation in case of system encryption to better handle some corner cases.
      • Minor UI and documentation changes.
    • Linux:

      • Workaround gcc 4.4.7 bug under CentOS 6 that caused VeraCrypt built under CentOS 6 to crash when Whirlpool hash is used.
      • Fix "incorrect password attempt" written to /var/log/auth.log when mounting volumes.
      • Fix dropping file in UI not showing its correct path , specifically under GTK-3.
      • Add missing JitterEntropy implementation/
    • MacOSX:

      • Fix some devices and partitions not showing in the device selection dialog under OSX 10.13 and newer.
      • Fix keyboard tab navigation between password fields in "Volume Password" page of volume creation wizard.
      • Add missing JitterEntropy implementation/
      • Support APFS filesystem for creation volumes.
      • Support Dark Mode.
  23. 1.24

    Развернуть

    Релиз GitHub

    Binaries for Windows, Linux and MacOSX are available at Launchpad, Sourceforge and Bitbucket

    Changes between 1.23-Hotfix-2 and 1.24 (6 October 2019) :

    • All OSs:
      • Increase password maximum length to 128 bytes in UTF-8 encoding for non-system volumes.
      • Add option to use legacy maximum password length (64) instead of new one for compatibility reasons.
      • Use Hardware RNG based on CPU timing jitter "Jitterentropy" by Stephan Mueller as a good alternative to CPU RDRAND (http://www.chronox.de/jent.html)
      • Speed optimization of XTS mode on 64-bit machine using SSE2 (up to 10% faster).
      • Fix detection of CPU features AVX2/BMI2. Add detection of RDRAND/RDSEED CPU features. Detect Hygon CPU as AMD one.
    • Windows:
      • Implement RAM encryption for keys and passwords using ChaCha12 cipher, t1ha non-cryptographic fast hash and ChaCha20 based CSPRNG.
        • Available only on 64-bit machines.
        • Disabled by default. Can be enabled using option in UI.
        • Less than 10% overhead on modern CPUs.
        • Side effect: Windows Hibernate is not possible if VeraCrypt System Encryption is also being used.
      • Mitigate some memory attacks by making VeraCrypt applications memory inaccessible to non-admin users (based on KeePassXC implementation)
      • New security features:
        • Erase system encryption keys from memory during shutdown/reboot to help mitigate some cold boot attacks
        • Add option when system encryption is used to erase all encryption keys from memory when a new device is connected to the system.
        • Add new driver entry point that can be called by applications to erase encryption keys from memory in case of emergency.
      • MBR Bootloader: dynamically determine boot loader memory segment instead of hardcoded values (proposed by neos6464)
      • MBR Bootloader: workaround for issue affecting creation of hidden OS on some SSD drives.
      • Fix issue related to Windows Update breaking VeraCrypt UEFI bootloader.
      • Several enhancements and fixes for EFI bootloader:
        • Implement timeout mechanism for password input. Set default timeout value to 3 minutes and default timeout action to "shutdown".
        • Implement new actions "shutdown" and "reboot" for EFI DcsProp config file.
        • Enhance Rescue Disk implementation of restoring VeraCrypt loader.
        • Fix ESC on password prompt during Pre-Test not starting Windows.
        • Add menu entry in Rescue Disk that enables starting original Windows loader.
        • Fix issue that was preventing Streebog hash from being selected manually during Pre-Boot authentication.
        • If "VeraCrypt" folder is missing from Rescue Disk, it will boot PC directly from bootloader stored on hard drive
          • This makes it easy to create a bootable disk for VeraCrypt from Rescue Disk just by removing/renaming its "VeraCrypt" folder.
      • Add option (disabled by default) to use CPU RDRAND or RDSEED as an additional entropy source for our random generator when available.
      • Add mount option (both UI and command line) that allows mounting a volume without attaching it to the specified drive letter.
      • Update libzip to version 1.5.2
      • Do not create uninstall shortcut in startmenu when installing VeraCrypt. (by Sven Strickroth)
      • Enable selection of Quick Format for file containers creation. Separate Quick Format and Dynamic Volume options in the wizard UI.
      • Fix editor of EFI system encryption configuration file not accepting ENTER key to add new lines.
      • Avoid simultaneous calls of favorites mounting, for example if corresponding hotkey is pressed multiple times.
      • Ensure that only one thread at a time can create a secure desktop.
      • Resize some dialogs in Format and Mount Options to fix some text truncation issues with non-English languages.
      • Fix high CPU usage when using favorites and add switch to disable periodic check on devices to reduce CPU load.
      • Minor UI changes.
      • Updates and corrections to translations and documentation.
    • MacOSX:
      • Add check on size of file container during creation to ensure it's smaller than available free disk space. Add CLI switch --no-size-check to disable this check.
    • Linux:
      • Make CLI switch --import-token-keyfiles compatible with Non-Interactive mode.
      • Add check on size of file container during creation to ensure it's smaller than available free disk space. Add CLI switch --no-size-check to disable this check.