Skip to content

Snapmaker Orca Release Notes

Snapmaker · A macOS 3D-printing slicer based on OrcaSlicer and tailored to Snapmaker printers, with slicing, printer monitoring, and remote control.

CaskEngineering and CADAuto-updates 296
Install command
brew install --cask snapmaker-orca
30-day installs
58
#1197 in App
1-year installs
277
Last 365 days
Latest version
2.4.1
Download size
274MB
dmg
Release cadence
Every 2 weeks
2 releases in 30 days
  1. 2.4.2-alpha

    LatestPre-release

    GitHub Release

    Snapmaker Orca V2.4.2-Alpha-Release

    New Features

    1. Added a Print History entry on the home page to quickly view past print tasks.

    Image: Image

    1. Upgraded the original Model Library entry to Online Models, allowing users to browse and jump to the Snapmaker Space website directly from the home page.

    Known issue: If an online model's name contains characters that are not supported in filenames on your system, downloading the model in Snapmaker Orca will fail, and the current version does not show a clear reason for the failure. As a workaround, you can download the model from the web portal. This issue will be fixed in a future release.

    Image: Image

    1. Added a multi-dovetail cutting option alongside the existing single-dovetail cutting to support larger joint sizes.

    Image: Image

    1. Added Mesh Subdivision to improve surface continuity, making model details smoother and enhancing the surface quality of printed parts.

    Image: Image

    1. Added model shadow display to make previews more realistic and three-dimensional. It can be enabled or disabled in Preferences (currently available on Windows and Linux only).

    Image: Image

    Improvements

    1. Added a "Don't remind me again" checkbox to the bottom-left of the out-of-memory dialog. The prompt can be restored at any time in Preferences.

    Image: Image

    1. Optimized the top-surface path generation algorithm to improve top infill path quality and surface flatness, enhancing the appearance of printed parts.

    Image: Image

    1. Optimized print speed control for overhang areas to improve overhang quality and reduce stringing and sagging.

    Image: Image

    1. Significantly improved UI responsiveness and reduced latency during painting.

    2. Optimized click-selection responsiveness in large scenes and increased the pick success rate for hollow models, making objects easier to select.

    Bug Fixes

    1. Fixed the issue where, after enabling the Raft and setting the Support interface fan speed to 50%, this setting was incorrectly applied to the inner and outer walls of the model's first layer.

    2. Fixed the issue where, at the end of printing, the nozzle traveled from the model to the wipe tower without lifting, which could cause the tip forming line to be printed incorrectly.

    3. Fixed the issue where the retraction before wiping did not match the setting.

    4. Fixed the issue where the G-code preview after slicing the same model was inconsistent with the exported G-code when reopened.

    5. Fixed the issue where filament was incorrectly assigned for internal bridging in special cases.

    6. Fixed the issue where no space was left for the prime tower when the model covered the entire plate.

    7. Fixed the issue where the total layers count in the G-code comment line was inconsistent with the layer height shown in the slicing preview.

    8. Fixed the issue where overlapping painted areas in multi-color painting were not merged into a single toolpath.

    9. Fixed the issue where, when multi-color sub-layers were enabled, the sub-layer height did not match the percentage blend ratio (not 1:1).

    10. Fixed the issue where colors were sorted in no particular order when blending three colors in multi-color sub-layers.

    11. Fixed the issue where colors were printed incorrectly due to missing toolhead change commands when Subdivide Mix Layer and Prime Tower were enabled.

    12. Fixed the issue where part of the model's colors was missing after configuring Color Mixing Match.

    13. Fixed the issue where some filaments' mixing ratios were below the Min Mix Ratio in Match mode.

    14. Fixed the issue where, after syncing a single filament, the original filament type was still used during slicing and upload/print.

    15. Fixed the issue where High Flow could not be applied after modifying the process object configuration.

    16. Fixed the issue where the high-flow parameter of the filament tool-change retraction length could not be applied in some scenarios.

    17. Fixed the issue where, when setting the brim in a 3MF file containing multiple objects, all brim filament used the filament of the first printed object.

    18. Fixed the issue where Default Filament appeared after importing a 3MF file.

    19. Fixed the issue where the filament color was displayed incorrectly in the UI after importing a 3MF file.

    20. Fixed the issue where the color matching panel and the viewport showed inconsistent colors when importing an OBJ file with color data.

    21. Fixed the issue where the software showed an error pop-up when importing an STL file larger than 2 GB.

    22. Fixed the issue where the assembly view could not be displayed when the model file was too large.

    23. Fixed the issue where other objects could not be selected after combining objects.

    24. Fixed the issue where importing certain 3MF files for slicing caused the software to crash.

    25. Fixed the issue where AppImage failed to open in some Linux environments due to system language compatibility issues.

    26. Fixed the issue where an unsaved process blocked the shutdown or sign-out prompt on Windows.

    27. Fixed the issue where the software could randomly crash when quitting on macOS.

    28. Fixed the issue where the software crashed on the upload preprocessing and print preprocessing pages on macOS.

    29. Fixed the issue where the version update pop-up displayed a white screen on macOS.

    30. Fixed the issue where the application crashed during exit when automatic backup was enabled.

    31. Fixed the issue where the slicing progress dialog disappeared and canceling slicing was very slow when connecting a device and switching back to the preview page during slicing.

    32. Fixed the issue where opening a 3MF file with Snapmaker Orca by double-clicking failed when option "Allow only one Snapmaker Orca instance" was enabled and the software was already running.

    33. Fixed the issue where launching Snapmaker Orca from the Mac Space site differed from Windows.

    34. Updated the signing policy for the Windows installer package to prevent false positives from antivirus software.

    35. Fixed the issue where, when using the Snapmaker Orca CLI slicing command, passing a 3MF project file path as a parameter caused slicing to be rejected due to a version mismatch. (Thanks to community user @KuzuriAo, PR #839.)

    36. Fixed the issue where resource copying failed on Windows due to non-ASCII characters (e.g., Chinese) in the path.

    37. Fixed the issue where the UI showed Generic ABS filament while the actual filament was Generic PLA.

    38. Fixed the issue where the high/low-temperature filament mixing detection did not take effect after copying a model with Ctrl+C / Ctrl+V.

    39. Fixed the issue where a blank prompt pop-up appeared when fewer than 4 filaments were defined in the 3MF file.

    40. Fixed the issue where the plate could not be switched after opening a gcode.3MF file containing multiple plates.

    41. Changed the default nozzle type in printer settings: the default type for the 0.4 mm nozzle was changed from hardened steel to stainless steel, and the default type for the 0.6 mm nozzle was changed from stainless steel to hardened steel. (Thanks to community user @kuzuriao)

    新增功能

    1. 首页新增打印历史入口,以支持快速查看过往的打印任务记录

    Image: Image

    1. 原模型库入口升级为在线模型,首页即可直接浏览并跳转至 Snapmaker Space 模型网站

    已知问题:当在线模型的模型名称中包含系统不支持的文件名字符时,在Snapmaker Orca内下载该模型会失败,且当前版本不会明确提示失败原因。作为临时方案,您可以前往网页端下载该模型,此问题将在后续版本中修复。

    Image: Image

    1. 在原有单燕尾榫切割的基础上,新增多燕尾榫切割选项,满足更大尺寸的拼接需求

    Image: Image

    1. 新增网格细分能力,在细分的同时增强模型表面连续性,让模型细节更平滑精细,提升打印成品的表面质量。

    Image: Image

    1. 支持显示模型的阴影效果,让模型预览更具真实与立体感,您也可以在「偏好设置」中按需开启或关闭(当前仅支持 Windows 与 Linux 平台)。

    Image: Image

    体验优化

    1. 内存不足弹窗左下角新增「下次不再提醒」选项,您可选择不再被打扰;同时仍可在「偏好设置」中随时恢复弹窗提示。

    Image: Image

    1. 优化顶面路径生成算法,提升顶面填充的路径质量与表面平整度,改善打印成品的观感。

    Image: Image

    1. 优化悬垂区域的打印速度控制,提升悬垂结构的成型质量,减少拉丝与塌陷。

    Image: Image

    1. 大幅提升涂色过程中的交互响应速度,操作更跟手。

    2. 优化大场景下的模型点击选中的响应速度,并提升镂空模型的拾取成功机率,让选中对象变得更轻松。

    问题修复

    1. 修复开启筏层后,支撑接触面风扇速度设为 50% 时,模型首层内外墙错误继承支撑接触面风扇设置的问题。

    2. 修复打印结束时喷嘴从模型到擦拭塔空驶无抬升、可能错误打印尖端成型线的问题。

    3. 修复擦拭前回抽与设置不符的问题。

    4. 修复同一模型切片后的 gcode 预览与导出 gcode 重新打开存在数据不一致的问题。

    5. 修复特殊情况下内部搭桥分配耗材丝不正确的问题。

    6. 修复模型铺满打印板时未规避擦料塔的问题。

    7. 修复 gcode 注释行 total layers count 与切片预览层高不一致的问题。

    8. 修复混色涂色区域覆盖涂色未合并为一条工具路径的问题。

    9. 修复开启混色子层时子层高度与百分比混合比例不符(非 1:1)的问题。

    10. 修复混色子层 3 颜色混色时无规则排序的问题。

    11. 修复启用 Subdivide Mix Layer 和 Prime Tower 时,因缺少工具头切换指令导致颜色打印错误的问题。

    12. 修复混色匹配后模型颜色部分缺失的问题。

    13. 修复匹配模式混合比例部分耗材低于最低混色比例的问题。

    14. 修复单耗材同步后切片、上传打印时仍为原耗材类型的问题。

    15. 修复工艺对象配置修改后高流量无法应用的问题。

    16. 修复耗材换刀回抽长度参数的高流量参数部分场景无法应用的问题。

    17. 修复在包含多对象的 3mf 中设置 brim 时,brim 耗材全部使用第一个打印件耗材的问题。

    18. 修复 3mf 打开后出现 Default Filament 的问题。

    19. 修复导入 3mf 耗材颜色 UI 显示错误的问题。

    20. 修复导入带颜色 obj 文件时颜色匹配面板与视图颜色显示不一致的问题。

    21. 修复导入超过 2GB STL 文件时软件弹窗报错的问题。

    22. 修复模型文件过大导致装配体视角无法显示的问题。

    23. 修复组合对象后其余对象无法选中的问题。

    24. 修复导入某些3mf 文件进行切片导致软件崩溃闪退的问题。

    25. 修复 Linux 系统语言兼容问题导致部分环境 AppImage 无法打开的问题。

    26. 修复 Windows 系统关机/注销时被未保存进程阻塞触发提示的问题。

    27. 修复 macOS 退出应用时软件可能随机崩溃的问题。

    28. 修复 macOS 端在上传预处理与打印预处理页面发生崩溃的问题。

    29. 修复 macOS 更新版本弹窗出现白屏的问题。

    30. 修复启用自动备份时退出应用过程中闪退的问题。

    31. 修复切片过程中连接设备、切回预览页时切片进度条弹窗消失、取消切片很慢的问题。

    32. 修复当设置仅允许一个应用实例且处于运行态时,双击打开 3mf 文件选择 Snapmaker Orca 打开失败的问题。

    33. 修复 mac 模型站唤醒 Snapmaker Orca 与 Windows 表现不一致的问题。

    34. 更新Windows 安装包程序签名策略,避免被杀毒软件误报。

    35. 修复使用 Snapmaker Orca CLI 切片命令时,参数带 3mf 项目文件路径会因版本不匹配被拒绝切片的问题(感谢社区用户 @KuzuriAo,PR #839)。

    36. 修复 Windows 电脑非 ASCII 编码中文名路径导致的资源拷贝问题。

    37. 修复 UI 显示为 Generic ABS 耗材但实际为 Generic PLA 耗材的问题。

    38. 修复通过 Ctrl+C / Ctrl+V 复制模型后,高低温耗材混用检测未生效的问题。

    39. 修复当 3mf 内定义的耗材个数小于 4 时,弹出内容空白的提示弹窗问题。

    40. 修复打开包含多盘的 gcode.3mf文件后无法切换打印盘的问题。

    41. 修改打印机设置中喷嘴类型的默认值:0.4mm喷嘴默认类型从硬化钢改为不锈钢,0.6mm喷嘴默认类型从不锈钢改为硬化钢。(感谢社区用户 @KuzuriAo)

  2. 2.4.1

    Patch

    OpenNavo editorial Added to Homebrew

    Expands multi-filament printing controls and improves Prime Tower behavior, support generation, slicing stability and rendering.

    • Adds extruder detours around the Prime Tower during tool changes, filament adhesion grouping, interface controls and internal ribs. Tower previews now match sliced results more closely.
    • Adds tree-support transition layers with separate speed and flow settings, minimum support contact area and warnings for unsupported support settings or material combinations.
    • Adds First Layer Travel acceleration and jerk settings, top/bottom paint penetration layers and more Snapmaker PETG HF colors.
    • Changes First Layer Expansion to -1 (Auto). Older Snapmaker Orca versions show an error when opening 3MF files created in 2.4.1. Adjusts bridge, support-angle and filament bed-temperature defaults.
    • Updates G-code templates to prevent nozzle collisions during sequential printing, filament changes and pauses. Improves G-code preview rendering, graphics performance, page loading, login and device connections.
    • Fixes 3MF parsing and color loss, filament mapping, Prime Tower gaps and previews, Brim interference, missing first layers, support surfaces and variable-layer-height handling.
    • Fixes startup crashes related to TLS certificate overrides, crashes when deleting a plate during slicing, incorrect bed temperatures and LAN connection-state synchronization.
    • On Windows, adds an optional personal-data cleanup during uninstallation and fixes behavior with the graphics card disabled. On Linux, fixes the Z camera-fit shortcut and saved login state.

    Official release notes

  3. 2.4.1-beta

    Pre-release

    GitHub Release

    Snapmaker Orca V2.4.1-Beta-Release

    New Features

    1. Added a cache clearing option during uninstallation (Windows only). You can choose whether to delete personal data during uninstallation; unchecked by default.

    Image: Image

    Image: Image

    1. Added a feature where the extruder detours around the Prime Tower and enters through the outer wall opening during tool changes.

    Image: Image

    1. Added four parameters to the Filament panel: Interface Layer Pre-extrusion Distance, Interface Layer Pre-extrusion Length, Interface Layer Print Temperature, and Adhesiveness Category (visible in Developer mode).

    Image: Image

    1. Added two parameters to the Prime Tower panel: Enable Tower Interface Features and Cool Down from Interface Boost During Prime Tower (visible in Developer mode).

    Image: Image

    1. Added one parameter to the Prime Tower panel: Internal Ribs (visible in Advanced mode).

    Image: Image

    1. Added a tree Support Transition type with independent print speed and flow settings to improve support print quality.

    Image: Image

    1. Added a support parameter validation prompt: when the support style is "Organic" and the base pattern is set to “Lightning”, a pop-up warning will state that the “Lightning base pattern is not supported and Rectilinear will be used instead.”

    Image: Image

    1. Added a support parameter validation prompt: when the support style is "Organic", Support Wall Loops is set to 2, and the base pattern is non-default/hollow, a pop-up warning will appear.

    Image: Image

    1. Added the "Minimum Support Contact Area" parameter, which allows you to set an area threshold to determine whether a support interface is generated.

    Image: Image

    1. Added multi-filament support detection: when "Support/Raft base" is set to a non-soluble material, a pop-up warning appears and allows you to reset it to "Default."

    Image: Image

    Image: Image

    1. Added multi-filament support detection: when PLA/PETG are used as support for each other and the Base pattern or Interface pattern is non-default, a pop-up prompts you to reset the parameters.

    Image: Image

    1. Added "First Layer Travel" parameter under the Acceleration section; added "First Layer Travel" parameter under the Jerk (XY) section.

    Image: Image

    Image: Image

    1. Added the "Top/Bottom Paint Penetration Layers" parameter: configures how many layers the painted top/bottom areas penetrate into the infill, solving color bleeding when mixing light and dark filaments.

    Image: Image

    1. Added multiple new colors for Snapmaker PETG HF filament. See the table below for details:

      Filament SKU Color Name Color Value

      Snapmaker PETG HF 34171 Maroon #7E2D40

      34172 Sage Green #A3B2A4

      34173 Ice Blue #B1E4E3

      34174 Ocean Blue #4EC3E0

      34175 Iris Purple #685BC7

      34152 Apple Green #9DF48F

      34153 Avocado Green #436E42

      34154 Aquamarine #53EECA

      34155 Cornflower Blue #4895F9

      34156 Ink Blue #1A4E8A

    Improvements

    1. Optimized Prime Tower logic. Filaments are now automatically grouped by adhesion type, preventing mixing of materials with different adhesion properties and improving wiping tower stability.

    2. Optimized Prime Tower preview on the Prepare page: pre-slicing size of prime tower now closer to actual result; post-slicing shape matches the sliced result.

    3. Changed the default Prime Tower position from top-left to left-center.

    4. Moved the "No Sparse Layer" option to be visible in Developer mode.

    5. Changed the default value of "First Layer Expansion" to -1 (Auto), with support for 0 (disable expansion) or ≥ 1 (expand outward).

      Note: When opening a 3MF file created in V2.4.1 with an older version of Snapmaker Orca, an error prompt will appear as follows.

    Image: Image

    1. Changed the minimum support Threshold Angle to 1°.

    2. Changed the "Bridge Flow" default value from 0.8 to 1.0, and "External Bridge Density" default from 80 to 100.

    3. Changed the "Max Bridge Length" default value from 10 mm to 0 mm, so that bridge areas can get full support by default.

    Image: Image

    1. Raised the "External Bridge Density" upper limit to 120% to improve bridge surface seam closure.

    Image: Image

    1. Optimized filament display on the Prepare page: changed from a dropdown to a hierarchical menu for faster search and selection.

    2. Optimized the pop-up logic for High Flow Hot Ends: removed the unclear hover pop-up; now, when a high-flow hot end is detected, the filament grouping window pops up by default during slicing.

    3. Optimized the G-code template to prevent nozzle collisions with the object during sequential printing, filament changes, or print pauses. Thanks to Kuzuri (https://github.com/KuzuriAo) for the contribution. Related PR: https://github.com/Snapmaker/OrcaSlicer/pull/453

    4. Optimized the pop-up message for sequential printing collision risk.

    5. Optimized G-code preview rendering performance, improving responsiveness of interactions such as layer-height replay.

    6. Optimized graphics rendering performance, reducing context switching frequency and improving UI smoothness.

    7. Optimized model selection highlighting.

    8. Optimized loading efficiency and some UI text on the Home, Preview and Device pages.

    9. Optimized the user experience for software login and device connection.

    10. Optimized the bed temperature parameters for multiple filaments. See the table below for details:

    Note: 0°C indicates that printing is not supported on this type of build plate.

      Filament (Nozzle Size)
      Bed Type
      Bed Temperature Change (Original → New)
      Change Type
    
      PETG Translucent (0.2/0.4/0.6/0.8 mm)
      Graphic Effect Steel Plate
      80°C → 0°C
      Disabled
    
      PLA CF (0.4/0.6/0.8 mm)
      Graphic Effect Steel Plate
      65°C → 0°C
      Disabled
    
      PVA (0.4/0.6/0.8 mm)
      Graphic Effect Steel Plate
      65°C → 0°C
      Disabled
    
      Smooth PEI Plate
      65°C → 70°C
      Increased
    
      Textured PEI Plate
      65°C → 70°C
      Increased
    
      PLA Matte (0.6 mm)
      Graphic Effect Steel Plate
      0°C → 65°C
      Increased
    
      Textured PEI Plate
      45°C → 65°C
      Increased
    
      PLA Matte (0.8 mm)
      Graphic Effect Steel Plate
      0°C → 65°C
      Increased
    
      PLA Wood (0.4 mm)
      Graphic Effect Steel Plate
      65°C → 70°C
      Increased
    
      PLA Wood (0.6/0.8 mm)
      Graphic Effect Steel Plate
      0°C → 70°C
      Increased
    
      PLA Translucent (0.2/0.4/0.6/0.8 mm)
      Graphic Effect Steel Plate
      65°C → 70°C
      Increased
    
      Support for PLA (0.4/0.6/0.8 mm)
      Graphic Effect Steel Plate
      65°C → 70°C
      Increased
    
      PLA Glow (0.4 mm)
      Graphic Effect Steel Plate
      65°C → 70°C
      Increased
    
      PLA Snapspeed (0.6/0.8 mm)
      Smooth PEI Plate
      55°C → 65°C
      Increased
    

    Bug Fixes

    1. Fixed an issue where exported 3MF files contained Bambu brand fields; these have now been replaced with Snapmaker_orca brand fields.

    2. Fixed an issue in V2.4.0 where modifying the "Small part" parameter under Process > Object > Speed displayed an invalid error.

    3. Fixed an issue in V2.4.0 where Bambu Lab 3MF files failed to parse after modifying object speed values and importing them into Orca.

    4. Fixed an issue where filament colors were displayed incorrectly in the statistics list on the Preview page when opening a G-code file in Orca.

    5. Fixed an issue where the interface displayed a Textured PEI Plate, but the actual plate was a low-temperature cold steel plate.

    6. Fixed an issue where colors could be missing when using filaments with IDs greater than 16.

    7. Fixed an issue where the Prime Tower preview size on the Prepare page changed with the total number of filaments.

    8. Fixed an issue where the model's first layer was incorrectly subdivided after enabling "Subdivide Mixing Layers."

    9. Fixed an issue where unused filaments were still displayed in the Prime Tower on the Prepare page.

    10. Fixed an issue where the outer wall opening parameter was still displayed after disabling the Prime Tower. The "Brim chamfer" and "Max chamfer width" parameters have also been removed from the Prime Tower panel.

    11. Fixed an issue where gaps appeared when the "Wipe tower purge lines spacing" was set to a value other than 100%. The first layer purge lines spacing will now be executed at 100% to improve Prime Tower stability.

    12. Fixed an issue where, during multi-plate multi-color printing, using Ctrl+Z to undo restored the Prime Towers of all plates except the first plate to their initial positions.

    13. Fixed an issue where the model skirt path overlapped with the Prime Tower skirt path.

    14. Fixed an issue where, for special models, elephant foot compensation caused the first layer to be missing after slicing.

    15. Fixed an issue where the "Avoid interface filament for base" option under filament for supports did not take effect.

    16. Fixed an issue where the first layer did not follow the "Inner/Outer/Inner" wall printing order.

    17. Fixed an issue where the actual effect of the support interface pattern conflicted with the "Default" setting.

    18. Fixed an issue where the infill pattern did not meet expectations when sparse infill density was set to 100%. A prompt will now appear.

    19. Fixed an issue where the cooling fan caused an abnormal drop in Z-axis height.

    20. Fixed an issue where Pressure Advance still took effect after being disabled.

    21. Fixed an issue where gap fill was printed before outer walls.

    22. Fixed an issue where Boolean operations failed when some objects were mirrored.

    23. Fixed an issue where the "Lock rotation" parameter for embossed text did not take effect.

    24. Fixed an issue where the merge target was lost or pointed to the wrong filament when merging physical filaments into mixed filaments.

    25. Fixed an issue where object-level extruder and filament mapping was incorrect after deleting filament.

    26. Fixed an issue where the object list and layer height range were not refreshed after batch-cleaning unused filaments.

    27. Fixed an issue where the slicing status was not reset after all slicing was completed.

    28. Fixed an issue where the software crashed on startup when the TLS certificate override environment variable was not set.

    29. Fixed an issue where the build plate origin was not initialized, causing abnormal slicing coordinates.

    30. Fixed an issue where, after disabling the graphics card on Windows, opening Orca displayed a pop-up and the Prepare page was unavailable.

    31. Fixed an issue where the camera fit shortcut Z did not work on Linux.

    32. Fixed an issue where, in multi-plate scenarios, deleting the plate being sliced during slicing caused the program to crash.

    33. Fixed an issue where the bed temperature in the G-code did not match the bed temperature configured in the Filaments settings.

    34. Fixed an issue where, with multiple objects using different filaments, setting the Skirt type to "Per Object" only took effect for one object.

    35. Fixed an issue where the "Max bridge length" parameter did not correctly show/hide based on "Support type" and its value did not take effect.

    36. Fixed an issue where sliced G-code still had gaps when "External bridge density" was set above 100%.

    37. Fixed an issue where Brim was lost for multi-color models when using painted Brim with "Subdivide Mixing Layers" and "Full Domain" enabled.

    38. Fixed an issue where non-SEMM Prime Towers did not support per-filament minimum purge amount. You can now configure the minimum purge amount separately in Filaments settings and on the Prime Tower page and the larger value will be used.

    39. Fixed an issue where colors were lost or bled after slicing multi-color 3MF files.

    40. Fixed an issue where the slow printing layer count was offset when using a Raft.

    41. Fixed slicing issues such as extrusion path interference and missing tree supports.

    42. Fixed an issue where support interfaces for certain model features could not form a continuous surface. Bambu Lab's overhang classification system has been introduced.

    43. Fixed an issue where abnormal mapping between Organic Tree support and Raft caused empty layers in long pillars.

    44. Fixed an issue where the contact area of normal supports was lost in Variable Layer Height mode.

    45. Fixed an issue where overhang layers were missing in the Preview page after slicing when "Partially Bridged" was selected for "Bridging Counterbore Holes."

    46. Fixed an issue where flat models (top height = 0) could not generate supports properly.

    47. Fixed an issue where negative parts of some objects were lost after combining multiple objects and then splitting them.

    48. Fixed an issue where the first layer was missing after rotating a cube 45°.

    49. Fixed an issue where, after enabling Raft, performing Variable Layer Height operations on the model, clicking "Adaptive" and then "Smooth Model" reset the layer height; fixed an issue where selecting "Organic" without enabling supports incorrectly displayed "Variable Layer Height not supported".

    50. Fixed an issue where Orca did not recognize that one of multiple objects in a 3MF file had Variable Layer Height set.

    51. Fixed an issue where connection status was out of sync in multi-process LAN mode.

    52. Fixed an issue where Linux users' login status could not be saved.

    53. Fixed an issue where, after repeatedly clicking to download a time-lapse file, the status remained stuck at "Waiting for device upload".


    一、新增项

    1. 新增卸载程序时的缓存清除功能(仅限 Windows)。用户在卸载时自由选择是否删除个人数据,默认为不勾选。

    Image: Image

    Image: Image

    1. 新增换头时挤出机绕行擦拭塔并从外墙缺口进入的功能。

    Image: Image

    1. 耗材丝面板新增四项参数:接触层预挤出距离、接触层预挤出长度、接触层打印温度、粘接性类别(开发者模式下可见)

    Image: Image

    1. 擦拭塔面板新增两项参数:启用擦拭塔接触层功能、擦拭塔期间从接触层加速状态冷却(开发者模式下可见)

    Image: Image

    1. 擦拭塔面板新增一项参数:内支撑肋(高级模式下可见)。

    Image: Image

    1. 新增树状支撑过渡层类型,采用独立的打印速度与流量,提升支撑的打印质量。

    Image: Image

    1. 新增支撑参数校验提示:当支撑类型为“有机树”且主体图案选择“闪电”时,将弹窗提示”不支持闪电主体图案“,并改用直线图案。

    Image: Image

    1. 新增支撑参数校验提示:当支撑类型为有机支撑、外墙层数为 2 且主体图案非默认/空心时,将弹窗提示。

    Image: Image

    1. 新增”最小支撑接触面面积“参数,可根据面积阈值决定是否生成支撑界面。

    Image: Image

    1. 新增多耗材支撑检测:当”支撑/筏层主体“设置为非可溶性材料时,出现弹窗警告并允许重置为”缺省“。

    Image: Image

    Image: Image

    1. 新增多耗材支撑检测:当 PLA/PETG 互为支撑且主体图案或支撑面图案非默认值时,弹窗提示是否重置参数。

    Image: Image

    1. 速度面板下新增“首层空驶”参数;“抖动(XY轴)”板块下新增“首层空驶”参数。

    Image: Image

    Image: Image

    1. 新增“顶部/底部涂色渗透层数”参数:可配置顶面/底面涂色区域向填充渗透的层数,解决深浅色耗材混用时的透色问题。

    Image: Image

    1. 新增 Snapmaker PETG HF 耗材的多个颜色,具体见下表:

      耗材 SKU 颜色名称 色值

      Snapmaker PETG HF 34171 栗红色 #7E2D40

      34172 鼠尾草绿 #A3B2A4

      34173 冰蓝色 #B1E4E3

      34174 海洋蓝 #4EC3E0

      34175 鸢尾紫 #685BC7

      34152 青苹果绿 #9DF48F

      34153 牛油果绿 #436E42

      34154 湖水蓝 #53EECA

      34155 矢车菊蓝 #4895F9

      34156 墨蓝色 #1A4E8A

    二、优化项

    1. 优化了擦拭塔逻辑,依据耗材粘接性类别自动分区,避免不同粘接特性的耗材混杂,提升擦拭塔稳固性。

    2. 优化了准备页中擦拭塔的预览显示。切片前,擦拭塔的预览大小更接近实际切片结果;切片后,预览形状与切片结果保持一致。

    3. 更改了擦拭塔的默认位置,由左上角调整到左中位置。

    4. 将“无稀疏层”选项移至开发者模式中可见。

    5. 将“首层扩展”默认值调整为 -1(自动),并支持设置为 0(关闭扩展)或 ≥1(向外扩展)。

      备注:使用旧版本 Snapmaker Orca 打开 V2.4.1 版本的 3MF 时,将会弹出报错提醒,提醒信息如下。

    Image: Image

    1. 将支撑阈值角度最小值调整为 1°。

    2. 将”桥接流量“默认值由 0.8 调整为 1.0,”外部桥接密度“默认值由 80 调整为100。

    3. 将“最大桥接长度”默认值由 10 mm 调整为 0 mm,使桥接区域默认获得全支撑。

    Image: Image

    1. 将“外部桥接密度”上限放宽至 120%,改善桥面接缝闭合效果。

    Image: Image

    1. 优化准备页的耗材展示方式,由下拉框改为分级菜单展示,便于快速查找和选择耗材。

    2. 优化了高流量热端的弹窗提示逻辑,移除不明确的悬停弹窗,调整为当检测到高流量热端时,切片时默认弹出耗材分组窗口。

    3. 优化了 G-code 模板,防止逐件打印、换料或暂停打印时可能发生的喷嘴与打印主体碰撞的问题。感谢 Kuzuri(https://github.com/KuzuriAo)的贡献,相关 PR 见:https://github.com/Snapmaker/OrcaSlicer/pull/453。

    4. 优化了逐件打印碰撞风险的弹窗提示语。

    5. 优化了 G-code 预览的渲染性能,提升层高回放等交互操作的响应速度。

    6. 优化了图形渲染性能,减少上下文切换频次,提升界面流畅度。

    7. 优化了模型选中高亮效果。

    8. 优化了首页、预览页及设备页的加载效率和部分 UI 文案。

    9. 优化了软件登录和设备联机用户体验。

    10. 优化了多款耗材的床温参数,具体见下表:

      备注:0℃ 表示不支持在此类型的热床进行打印

      涉及耗材(喷嘴尺寸) 热床类型 床温修改(原值→新值) 变更类型

      PETG Translucent(0.2/0.4/0.6/0.8 mm) 特效纹理热床 80°C → 0°C 禁用

      PLA CF(0.4/0.6/0.8 mm) 特效纹理热床 65°C → 0°C 禁用

      PVA(0.4/0.6/0.8 mm) 特效纹理热床 65°C → 0°C 禁用

      光面 PEI 热床 65°C → 70°C 上调

      纹理 PEI 热床 65°C → 70°C 上调

      PLA Matte(0.6 mm) 特效纹理热床 0°C → 65°C 上调

      纹理 PEI 热床 45°C → 65°C 上调

      PLA Matte(0.8 mm) 特效纹理热床 0°C → 65°C 上调

      PLA Wood(0.4 mm) 特效纹理热床 65°C → 70°C 上调

      PLA Wood(0.6/0.8 mm) 特效纹理热床 0°C → 70°C 上调

      PLA Translucent(0.2/0.4/0.6/0.8 mm) 特效纹理热床 65°C → 70°C 上调

      Support for PLA(0.4/0.6/0.8 mm) 特效纹理热床 65°C → 70°C 上调

      PLA Glow(0.4 mm) 特效纹理热床 65°C → 70°C 上调

      PLA Snapspeed(0.6/0.8 mm) 光面 PEI 热床 55°C → 65°C 上调

    三、修复项

    1. 修复了导出的 3MF 文件中包含 Bambu 品牌字段的问题,统一替换为 Snapmaker_orca 品牌字段。

    2. 修复在 2.4.0 版本中,在工艺栏—对象—速度中修改“微小部分”参数时提示非法错误的问题。

    3. 修复在 2.4.0 版本中,Bambu Lab 的 3MF 文件修改对象速度值后导入 Orca 无法解析的问题。

    4. 修复了在 Orca 打开 G-code 文件时,预览页统计列表中耗材颜色显示错误的问题。

    5. 修复了界面显示为纹理 PEI 热床,但实际为低温冷打钢板的问题。

    6. 修复了使用编号超过 16 的耗材时,可能导致颜色缺失的问题。

    7. 修复了准备页中擦拭塔预览大小随耗材总数量变化的问题。

    8. 修复了开启“混色细分层高”后,模型首层被错误细分的问题。

    9. 修复了准备页中模型未使用的耗材仍显示在擦拭塔中的问题。

    10. 修复了关闭擦拭塔后,外墙缺口参数仍显示的问题。同时删除了擦拭塔面板中的“Brim 倒角 (Brim chamfer)”和“最大倒角宽度 (Max chamfer width)”参数。

    11. 修复擦拭塔冲刷线间距设置为非 100% 时出现缝隙的问题。现在首层冲刷线间距将按 100% 执行,以提高擦拭塔稳定性。

    12. 修复了多盘多色打印时,使用 Ctrl+Z 撤销会将除第一盘外所有盘的擦拭塔恢复到初始位置的问题。

    13. 修复了模型裙边路径与擦拭塔裙边路径重叠的问题。

    14. 修复了特殊模型因象脚补偿导致切片后首层缺失的问题。

    15. 修复了支撑耗材中的“界面材料不用于主体”选项不生效的问题。

    16. 修复了首层未遵循墙顺序为"内/外/内"打印顺序的问题。

    17. 修复了支撑面图案的实际效果与”缺省“设置冲突的问题。

    18. 修复了稀疏填充密度为 100% 时,填充图案不符合预期的问题。现在将出现提示弹窗。

    19. 修复了冷却风扇导致 Z 轴高度异常下降的问题。

    20. 修复了压力提前(Pressure Advance)关闭后未生效的问题。

    21. 修复了间隙填充在外墙之前打印的问题。

    22. 修复了部分对象已被镜像时,布尔运算出错的问题。

    23. 修复了浮雕文字“锁定旋转”参数未生效的问题。

    24. 修复了将物理耗材合并为混合耗材时,合并目标丢失或指向错误耗材的问题。

    25. 修复了删除耗材后,对象级的挤出机与耗材映射错误的问题。

    26. 修复了批量清理未使用耗材后,对象列表与层高范围未刷新的问题。

    27. 修复了全部切片完成后,切片状态未复位的问题。

    28. 修复了 TLS 证书覆盖环境变量未设置时,软件启动崩溃的问题。

    29. 修复了打印板原点未初始化导致切片坐标异常的问题。

    30. 修复了 Window 端禁用显卡打开 Orca 会有弹窗提示,且准备页不可用的问题。

    31. 修复了 Linux 端相机适配快捷键 Z 失灵的问题。

    32. 修复了多盘场景下,在切片过程中删除正在切片的盘导致程序崩溃的问题。

    33. 修复了 G-code 的热床温度与耗材设置的床温不一致的问题。

    34. 修复了多对象且使用不同耗材的情况下,将 Skirt 类型设置"按对象"后仅有一个对象生效的问题。

    35. 修复了“最大桥接长度”参数未随“支撑类型”正确显示/隐藏,且未生效的问题。

    36. 修复了将“外部桥接密度”设置为 100% 以上时,切片生成的 G-code 仍存在缝隙的问题。

    37. 修复了多色模型在使用绘制 Brim 并开启“混色细分层高”与“全域生效”时,Brim 丢失的问题

    38. 修复了修复非 SEMM 擦拭塔不支持每耗材最小清理量的问题。现在可分别在耗材设置与擦拭塔页面配置最小清理量,系统将取较大值执行。

    39. 修复了多色 3MF 切片后颜色丢失或串色的问题。

    40. 修复了使用筏层(Raft)时慢速打印层计数偏移的问题。

    41. 修复了挤出路径干涉、树支撑缺失等切片问题

    42. 修复了部分模型特征的支撑面无法连片完整的问题,现已引入 Bambu Lab 的悬垂分类体系。

    43. 修复了有机树支撑与筏层(Raft)映射异常导致长柱出现空层的问题。

    44. 修复了在可变层高模式下,普通支撑的接触面丢失的问题。

    45. 修复了当“沉孔搭桥”设置为“部分搭桥”时,模型切片后在预览界面中悬空层缺失的问题。

    46. 修复了扁平模型(顶高为 0)无法正常生成支撑的问题。

    47. 修复了多个对象组合后再拆分时,某些对象的负零件丢失的问题。

    48. 修复了立方体旋转 45° 后,模型首层缺失的问题。

    49. 修复了开启筏层后,对模型进行可变层高操作时,点击“自适应”后再点击“平滑模型“会重置层高的问题;修复了选择“有机树支撑”但未开启支撑时,错误提示“不支持可变层高”的问题。

    50. 修复了 3MF 中的多个对象的某个对象已设置可变层高,但 Orca 未识别的问题。

    51. 修复了多进程 LAN 模式连接状态不同步的问题。

    52. 修复了 Linux 用户登录状态无法保存的问题。

    53. 修复了多次点击下载延时摄影文件后,状态一直停留在“等待设备上传”的问题。


  4. 2.4.1-alpha

    Expand

    GitHub Release

    Snapmaker Orca V2.4.1-Alpha-Release

    一、新增项

    1. 新增卸载程序时的缓存清除功能(仅限 Windows)。用户在卸载时自由选择是否删除个人数据,默认为不勾选。

    Image: Image

    Image: Image

    1. 新增换头时挤出机绕行擦拭塔并从外墙缺口进入的功能。

    2. 耗材丝面板新增四项参数:接触层预挤出距离、接触层预挤出长度、接触层打印温度、粘接性类别(开发者模式下可见).

    Image: Image

    1. 擦拭塔面板新增两项参数:启用擦拭塔接触层功能、擦拭塔期间从接触层加速状态冷却(开发者模式下可见).

    Image: Image

    1. 擦拭塔面板新增一项参数:内支撑肋(高级模式下可见).

    Image: Image

    1. 新增树状支撑过渡层类型,采用独立的打印速度与流量,提升支撑的打印质量。

    Image: Image

    1. 新增支撑参数校验提示:当支撑类型为“有机树”且主体图案选择“闪电”时,将弹窗提示”不支持闪电主体图案“,并改用直线图案。

    Image: Image

    1. 新增支撑参数校验提示:当支撑类型为有机支撑、外墙层数为 2 且主体图案非默认/空心时,将弹窗提示。

    Image: Image

    1. 新增”最小支撑接触面面积“参数,可根据面积阈值决定是否生成支撑界面。

    Image: Image

    1. 新增多耗材支撑检测:当”支撑/筏层主体“设置为非可溶性材料时,出现弹窗警告并允许重置为”缺省“。

    Image: Image

    Image: Image

    1. 新增多耗材支撑检测:当 PLA/PETG 互为支撑且主体图案或支撑面图案非默认值时,弹窗提示是否重置参数。

    Image: Image

    1. 速度面板下新增“首层空驶”参数;“抖动(XY轴)”板块下新增“首层空驶”参数。

    Image: Image

    Image: Image

    1. 新增“顶部/底部涂色渗透层数”参数:可配置顶面/底面涂色区域向填充渗透的层数,解决深浅色耗材混用时的透色问题。

    Image: Image

    二、优化项

    1. 优化了擦拭塔逻辑,依据耗材粘接性类别自动分区,避免不同粘接特性的耗材混杂,提升擦拭塔稳固性。

    2. 优化了准备页中擦拭塔的预览显示。切片前,擦拭塔的预览大小更接近实际切片结果;切片后,预览形状与切片结果保持一致。

    3. 更改了擦拭塔的默认位置,由左上角调整到左中位置。

    4. 将“无稀疏层”选项移至开发者模式中可见。

    5. 将“首层扩展”默认值调整为 -1(自动),并支持设置为 0(关闭扩展)或 ≥1(向外扩展)。

      备注:使用旧版本 Snapmaker Orca 打开 V2.4.1 版本的 3MF 时,将会弹出报错提醒,提醒信息如下。

    Image: Image

    1. 将支撑阈值角度最小值调整为 1°。

    2. 将”桥接流量“默认值由 0.8 调整为 1.0,”外部桥接密度“默认值由 80 调整为100。

    3. 将“最大桥接长度”默认值由 10 mm 调整为 0 mm,使桥接区域默认获得全支撑。

    Image: Image

    1. 将“外部桥接密度”上限放宽至 120%,改善桥面接缝闭合效果。

    Image: Image

    1. 优化准备页的耗材展示方式,由下拉框改为分级菜单展示,便于快速查找和选择耗材。

    2. 优化了高流量热端的弹窗提示逻辑,移除不明确的悬停弹窗,调整为当检测到高流量热端时,切片时默认弹出耗材分组窗口。

    3. 优化了 G-code 模板,防止逐件打印、换料或暂停打印时可能发生的喷嘴与打印主体碰撞的问题。感谢 Kuzuri(https://github.com/KuzuriAo)的贡献,相关 PR 见:https://github.com/Snapmaker/OrcaSlicer/pull/453。

    4. 优化了逐件打印碰撞风险的弹窗提示语。

    5. 优化了 G-code 预览的渲染性能,提升层高回放等交互操作的响应速度。

    6. 优化了图形渲染性能,减少上下文切换频次,提升界面流畅度。

    7. 优化了模型选中高亮效果。

    8. 优化了首页、预览页及设备页的加载效率和部分 UI 文案。

    9. 优化了软件登录和设备联机用户体验。

    三、修复项

    1. 修复了导出的 3MF 文件中包含 Bambu 品牌字段的问题,统一替换为 Snapmaker_orca 品牌字段。

    2. 修复在 2.4.0 版本中,在工艺栏—对象—速度中修改“微小部分”参数时提示非法错误的问题。

    3. 修复在 2.4.0 版本中,Bambu Lab 的 3MF 文件修改对象速度值后导入 Orca 无法解析的问题。

    4. 修复了在 Orca 打开 G-code 文件时,预览页统计列表中耗材颜色显示错误的问题。

    5. 修复了界面显示为纹理 PEI 热床,但实际为低温冷打钢板的问题。

    6. 修复了使用编号超过 16 的耗材时,可能导致颜色缺失的问题。

    7. 修复了准备页中擦拭塔预览大小随耗材总数量变化的问题。

    8. 修复了开启“混色细分层高”后,模型首层被错误细分的问题。

    9. 修复了准备页中模型未使用的耗材仍显示在擦拭塔中的问题。

    10. 修复了关闭擦拭塔后,外墙缺口参数仍显示的问题。同时删除了擦拭塔面板中的“Brim 倒角 (Brim chamfer)”和“最大倒角宽度 (Max chamfer width)”参数。

    11. 修复擦拭塔冲刷线间距设置为非 100% 时出现缝隙的问题。现在首层冲刷线间距将按 100% 执行,以提高擦拭塔稳定性。

    12. 修复了多盘多色打印时,使用 Ctrl+Z 撤销会将除第一盘外所有盘的擦拭塔恢复到初始位置的问题。

    13. 修复了模型裙边路径与擦拭塔裙边路径重叠的问题。

    14. 修复了特殊模型因象脚补偿导致切片后首层缺失的问题。

    15. 修复了支撑耗材中的“界面材料不用于主体”选项不生效的问题。

    16. 修复了首层未遵循墙顺序为"内/外/内"打印顺序的问题。

    17. 修复了支撑面图案的实际效果与”缺省“设置冲突的问题。

    18. 修复了稀疏填充密度为 100% 时,填充图案不符合预期的问题。现在将出现提示弹窗。

    19. 修复了冷却风扇导致 Z 轴高度异常下降的问题。

    20. 修复了压力提前(Pressure Advance)关闭后未生效的问题。

    21. 修复了间隙填充在外墙之前打印的问题。

    22. 修复了部分对象已被镜像时,布尔运算出错的问题。

    23. 修复了浮雕文字“锁定旋转”参数未生效的问题。

    24. 修复了将物理耗材合并为混合耗材时,合并目标丢失或指向错误耗材的问题。

    25. 修复了删除耗材后,对象级的挤出机与耗材映射错误的问题。

    26. 修复了批量清理未使用耗材后,对象列表与层高范围未刷新的问题。

    27. 修复了全部切片完成后,切片状态未复位的问题。

    28. 修复了 TLS 证书覆盖环境变量未设置时,软件启动崩溃的问题。

    29. 修复了打印板原点未初始化导致切片坐标异常的问题。

    30. 修复了 Window 端禁用显卡打开 Orca 会有弹窗提示,且准备页不可用的问题。

    31. 修复了 Linux 端相机适配快捷键 Z 失灵的问题。

    32. 修复了多盘场景下,在切片过程中删除正在切片的盘导致程序崩溃的问题。

    33. 修复了 G-code 的热床温度与耗材设置的床温不一致的问题。

    34. 修复了多对象且使用不同耗材的情况下,将 Skirt 类型设置"按对象"后仅有一个对象生效的问题。

    35. 修复了“最大桥接长度”参数未随“支撑类型”正确显示/隐藏,且未生效的问题。

    36. 修复了将“外部桥接密度”设置为 100% 以上时,切片生成的 G-code 仍存在缝隙的问题。

    37. 修复了多色模型在使用绘制 Brim 并开启“混色细分层高”与“全域生效”时,Brim 丢失的问题

    38. 修复了修复非 SEMM 擦拭塔不支持每耗材最小清理量的问题。现在可分别在耗材设置与擦拭塔页面配置最小清理量,系统将取较大值执行。

    39. 修复了多色 3MF 切片后颜色丢失或串色的问题。

    40. 修复了使用筏层(Raft)时慢速打印层计数偏移的问题。

    41. 修复了挤出路径干涉、树支撑缺失等切片问题

    42. 修复了部分模型特征的支撑面无法连片完整的问题,现已引入 Bambu Lab 的悬垂分类体系。

    43. 修复了有机树支撑与筏层(Raft)映射异常导致长柱出现空层的问题。

    44. 修复了在可变层高模式下,普通支撑的接触面丢失的问题。

    45. 修复了“沉孔搭桥”设置为“部分搭桥”时,模型切片后在预览界面中悬空层缺失的问题。

    46. 修复了扁平模型(顶高为 0)无法正常生成支撑的问题。

    47. 修复了多个对象组合后再拆分时,某些对象的负零件丢失的问题。

    48. 修复了立方体旋转 45° 后,模型首层缺失的问题。

    49. 修复了开启筏层后,对模型进行可变层高操作时,点击“自适应”后再点击“平滑模型“会重置层高的问题;修复了选择“有机树支撑”但未开启支撑时,错误提示“不支持可变层高”的问题。

    50. 修复了 3MF 中的多个对象的某个对象已设置可变层高,但 Orca 未识别的问题。

    51. 修复了多进程 LAN 模式连接状态不同步的问题。

    52. 修复了 Linux 用户登录状态无法保存的问题。

    53. 修复了多次点击下载延时摄影文件后,状态一直停留在“等待设备上传”的问题。


    国际版:

    Snapmaker Orca 2.4.1 Release Notes

    New Features

    1. Added a cache clearing option during uninstallation (Windows only). You can choose whether to delete personal data during uninstallation; unchecked by default.

    Image: Image

    Image: Image

    1. Added a feature where the extruder detours around the Prime Tower and enters through the outer wall opening during tool changes.

    2. Added four parameters to the Filament panel: Interface Layer Pre-extrusion Distance, Interface Layer Pre-extrusion Length, Interface Layer Print Temperature, and Adhesiveness Category (visible in Developer mode).

    Image: Image

    1. Added two parameters to the Prime Tower panel: Enable Tower Interface Features and Cool Down from Interface Boost During Prime Tower (visible in Developer mode).

    Image: Image

    1. Added one parameter to the Prime Tower panel: Internal Ribs (visible in Advanced mode).

    Image: Image

    1. Added a tree Support Transition type with independent print speed and flow settings to improve support print quality.

    Image: Image

    1. Added a support parameter validation prompt: when the support style is "Organic" and the base pattern is set to “Lightning”, a pop-up warning will state that the “Lightning base pattern is not supported and Rectilinear will be used instead.”

    Image: Image

    1. Added a support parameter validation prompt: when the support style is "Organic", Support Wall Loops is set to 2, and the base pattern is non-default/hollow, a pop-up warning will appear.

    Image: Image

    1. Added the "Minimum Support Contact Area" parameter, which allows you to set an area threshold to determine whether a support interface is generated.

    Image: Image

    1. Added multi-filament support detection: when "Support/Raft base" is set to a non-soluble material, a pop-up warning appears and allows you to reset it to "Default."

    Image: Image

    Image: Image

    1. Added multi-filament support detection: when PLA/PETG are used as support for each other and the Base pattern or Interface pattern is non-default, a pop-up prompts you to reset the parameters.

    Image: Image

    1. Added "First Layer Travel" parameter under the Acceleration section; added "First Layer Travel" parameter under the Jerk (XY) section.

    Image: Image

    Image: Image

    1. Added the "Top/Bottom Paint Penetration Layers" parameter: configures how many layers the painted top/bottom areas penetrate into the infill, solving color bleeding when mixing light and dark filaments.

    Image: Image

    Improvements

    1. Optimized the prime tower logic. Filaments are now automatically grouped by adhesion type, preventing mixing of materials with different adhesion properties and improving wiping tower stability.

    2. Optimized prime tower preview on the Prepare page: pre-slicing size of prime tower now closer to actual result; post-slicing shape matches the sliced result.

    3. Changed the default wiping tower position from top-left to left-center.

    4. Moved the "No Sparse Layer" option to be visible ~~only ~~in Developer mode.

    5. Changed the default value of "First Layer Expansion" to -1 (Auto), with support for 0 (disable expansion) or ≥ 1 (expand outward).

      Note: When opening a 3MF file created in V2.4.1 with an older version of Snapmaker Orca, an error prompt will appear as follows.

    Image: Image

    1. Changed the minimum support threshold angle to 1°.

    2. Changed the "Bridge Flow" default value from 0.8 to 1.0, and "External Bridge Density" default from 80 to 100.

    3. Changed the "Max Bridge Length" default value from 10 mm to 0 mm, so bridge areas get full support by default.

    Image: Image

    1. Raised the "External Bridge Density" upper limit to 120% to improve bridge surface seam closure.

    Image: Image

    1. Optimized filament display on the Prepare page: changed from a dropdown to a hierarchical menu for faster search and selection.

    2. Optimized the pop-up logic for High Flow Hot Ends: removed the unclear hover pop-up; now, when a high-flow hot end is detected, the filament grouping window pops up by default during slicing.

    3. Optimized the G-code template to prevent nozzle collisions with the object during sequential printing, filament changes, or print pauses. Thanks to Kuzuri (https://github.com/KuzuriAo) for the contribution. Related PR: https://github.com/Snapmaker/OrcaSlicer/pull/453

    4. Optimized the pop-up message for sequential printing collision risk.

    5. Optimized G-code preview rendering performance, improving responsiveness of interactions such as layer-height replay.

    6. Optimized graphics rendering performance, reducing context switching frequency and improving UI smoothness.

    7. Optimized model selection highlighting.

    8. Optimized loading efficiency and some UI text on the Home, Preview and Device pages.

    9. Optimized the user experience for software login and device connection.

    Bug Fixes

    1. Fixed an issue where exported 3MF files contained Bambu brand fields; these have now been replaced with Snapmaker_orca brand fields.

    2. Fixed an issue in V2.4.0 where modifying the "Small part" parameter under Process > Object > Speed displayed an invalid error.

    3. Fixed an issue in V2.4.0 where Bambu Lab 3MF files failed to parse after modifying object speed values and importing them into Orca.

    4. Fixed an issue where filament colors were displayed incorrectly in the statistics list on the Preview page when opening a G-code file in Orca.

    5. Fixed an issue where the interface displayed a Textured PEI Plate, but the actual plate was a low-temperature cold steel plate.

    6. Fixed an issue where colors could be missing when using filaments with IDs greater than 16.

    7. Fixed an issue where the Prime Tower preview size on the Prepare page changed with the total number of filaments.

    8. Fixed an issue where the model's first layer was incorrectly subdivided after enabling "Subdivide Mixing Layers."

    9. Fixed an issue where unused filaments were still displayed in the Prime Tower on the Prepare page.

    10. Fixed an issue where the outer wall opening parameter was still displayed after disabling the Prime Tower. The "Brim chamfer" and "Max chamfer width" parameters have also been removed from the Prime Tower panel.

    11. Fixed an issue where gaps appeared when the "Wipe tower purge lines spacing" was set to a value other than 100%. The first layer purge lines spacing will now be executed at 100% to improve Prime Tower stability.

    12. Fixed an issue where, during multi-plate multi-color printing, using Ctrl+Z to undo restored the Prime Towers of all plates except the first plate to their initial positions.

    13. Fixed an issue where the model skirt path overlapped with the Prime Tower skirt path.

    14. Fixed an issue where, for special models, elephant foot compensation caused the first layer to be missing after slicing.

    15. Fixed an issue where the "Interface material not used for main body" option under support filament did not take effect.

    16. Fixed an issue where the first layer did not follow the "Inner/Outer/Inner" wall printing order.

    17. Fixed an issue where the actual effect of the support interface pattern conflicted with the "Default" setting.

    18. Fixed an issue where the infill pattern did not meet expectations when sparse infill density was set to 100%. A prompt will now appear.

    19. Fixed an issue where the cooling fan caused an abnormal drop in Z-axis height.

    20. Fixed an issue where Pressure Advance still took effect after being disabled.

    21. Fixed an issue where gap fill was printed before outer walls.

    22. Fixed an issue where Boolean operations failed when some objects were mirrored.

    23. Fixed an issue where the "Lock rotation" parameter for embossed text did not take effect.

    24. Fixed an issue where the merge target was lost or pointed to the wrong filament when merging physical filaments into mixed filaments.

    25. Fixed an issue where object-level extruder and filament mapping was incorrect after deleting filament.

    26. Fixed an issue where the object list and layer height range were not refreshed after batch-cleaning unused filaments.

    27. Fixed an issue where the slicing status was not reset after all slicing was completed.

    28. Fixed an issue where the software crashed on startup when the TLS certificate override environment variable was not set.

    29. Fixed an issue where the build plate origin was not initialized, causing abnormal slicing coordinates.

    30. Fixed an issue where, after disabling the GPU on Windows, opening Orca displayed a pop-up and the Prepare page was unavailable.

    31. Fixed an issue where the camera fit shortcut Z did not work on Linux.

    32. Fixed an issue where, in multi-plate scenarios, deleting the plate being sliced during slicing caused the program to crash.

    33. Fixed an issue where the bed temperature in the G-code did not match the bed temperature configured in the Filaments settings.

    34. Fixed an issue where, with multiple objects using different filaments, setting the Skirt type to "Per Object" only took effect for one object.

    35. Fixed an issue where the "Max bridge length" parameter did not correctly show/hide based on "Support type" and its value did not take effect.

    36. Fixed an issue where sliced G-code still had gaps when "External bridge density" was set above 100%.

    37. Fixed an issue where Brim was lost for multi-color models when using painted Brim with "Subdivide Mixing Layers" and "Full Domain" enabled.

    38. Fixed an issue where non-SEMM Prime Towers did not support per-filament minimum purge amount. You can now configure the minimum purge amount separately in Filaments settings and on the Prime Tower page and the larger value will be used.

    39. Fixed an issue where colors were lost or bled after slicing multi-color 3MF files.

    40. Fixed an issue where the slow printing layer count was offset when using a Raft.

    41. Fixed slicing issues such as extrusion path interference and missing tree supports.

    42. Fixed an issue where support interfaces for certain model features could not form a continuous surface. Bambu Lab's overhang classification system has been introduced.

    43. Fixed an issue where abnormal mapping between Organic Tree support and Raft caused empty layers in long pillars.

    44. Fixed an issue where the contact area of normal supports was lost in Variable Layer Height mode.

    45. Fixed an issue where overhang layers were missing in the Preview page after slicing when "Partially Bridged" was selected for "Bridging Counterbore Holes."

    46. Fixed an issue where flat models (top height = 0) could not generate supports properly.

    47. Fixed an issue where negative parts of some objects were lost after combining multiple objects and then splitting them.

    48. Fixed an issue where the first layer was missing after rotating a cube 45°.

    49. Fixed an issue where, after enabling Raft, performing Variable Layer Height operations on the model, clicking "Adaptive" and then "Smooth Model" reset the layer height; fixed an issue where selecting "Organic" without enabling supports incorrectly displayed "Variable Layer Height not supported".

    50. Fixed an issue where Orca did not recognize that one of multiple objects in a 3MF file had Variable Layer Height set.

    51. Fixed an issue where connection status was out of sync in multi-process LAN mode.

    52. Fixed an issue where Linux users' login status could not be saved.

    53. Fixed an issue where, after repeatedly clicking to download a time-lapse file, the status remained stuck at "Waiting for device upload".

  5. 2.4.0

    Expand

    OpenNavo editorial Added to Homebrew

    Adds model highlighting, LOD, filament choices and High-Flow Hot End parameters; consolidates U1 profiles and fixes slicing, G-code, login and platform issues.

    Features
    Selected model edges are white; assembly selection uses yellow.Adds LOD for complex-scene rendering.Color-mixing Auto Match Mode now lets users choose filament colors.Adds High-Flow Hot End parameters for select filaments and profiles.Adds six Snapmaker U1 filaments and expands color options.
    Changes
    Merges U1 profiles with the same layer height into Standard presets.Improves large-model slicing and G-code upload and printing stability.Upgrades OpenSSL to 3.5.7; adds a flow-model default for small areas.Updates the app icon and web setup and homepage logos.
    Fixes
    Fixes login, connection, weak-network and macOS display issues.Fixes slicing hangs, G-code import and preview issues, and crashes.Recommends device firmware 2.0.0 or later before updating.

    Snapmaker Orca 2.4.0 highlights selected model edges in white, or yellow in assembly mode, and adds an LOD system for complex scenes. Color-mixing Auto Match Mode now allows users to choose filament colors. High-Flow Hot End parameters are supported for select filaments and print profiles. Six filaments compatible with Snapmaker U1 are added, and color options expand for multiple materials.

    U1 print profiles with the same layer height but different quality labels are consolidated into Standard presets. The release also improves slicing stability for large models and stability when uploading and printing G-code files. OpenSSL is upgraded to 3.5.7. A default is added for the Flow Compensation Model parameter when Small area flow compensation is enabled. The app icon and web setup wizard and homepage logos are updated.

    Fixes cover login prompts and display of login responses, device connection issues, blank pages under weak network conditions, slicing hangs, G-code rendering and preview problems, and crashes. The release also addresses macOS page rendering and models opened from Snapmaker Space links. Updating device firmware to 2.0.0 or later before installing this version is recommended. Official release notes.

  6. 2.4.0-beta

    Expand

    GitHub Release

    Snapmaker Orca V2.4.0-Beta-Release

    Snapmaker Orca 2.4.0 Beta 发布。本版本功能与 Alpha 一致,集中修复了 Alpha 测试期间收集的 6 项问题(其中 2 项为崩溃类),并更新了应用图标与 Web 安装向导 / 主页 logo。欢迎大家升级体验,发现问题请通过 #840 看板或 GitHub issue 反馈。

    Note:本版本包含 2.4.0 Alpha 的全部内容——模型选中高亮、LOD 层级细节系统、混色匹配自动模式颜色选择、高流量热端(High-Flow Hot End)参数支持、新增 6 款耗材丝及扩充颜色库、三项底层依赖大版本升级(OpenSSL 3.5.7 / macOS 构建环境 / Flutter 3.41)等,完整清单见 2.4.0 Alpha 发布公告。以下仅列出 Alpha 之后合入的变更。


    一、修复项(Alpha 测试反馈)

    1. 修复 macOS 上从 Snapmaker Space 链接打开模型被丢弃的问题。由社区用户 @KuzuriAo 报告并提交修复,非常感谢!(#851 / #852)

    2. 修复发送打印时偶发崩溃的问题。设备耗材信息缓存存在双重编码时,连接成功回调会抛出异常导致进程退出;已在 C++ 与内置网页(Flutter)两侧同时修复。(#849 / #850)

    3. 修复打开预设差异对比对话框时崩溃的问题。(#848)

    4. 修复 macOS 内置网页加载异常的问题。网页导航现会等待处理就绪后再进行;同时新增内置网页运行状态上报(2 分钟看门狗,无论是否登录均上报),便于持续定位白屏类问题。(#857)

    5. 修复 macOS 首页 / 设备页不渲染(白屏)的问题。问题源于 WKWebView 并发加载与本地网络策略限制,已在两台 macOS 机器上实测恢复。(#853 / #865)

    6. 修复校准流程因配置项类型不匹配而异常的问题。系 Alpha 工艺迁移的遗留影响,涉及 enable_overhang_speed、initial_layer_speed、slow_down_layer_time 等参数。(#861)

    二、其他改进

    1. 更新应用图标及 Web 安装向导 / 主页 logo,含 Windows 任务栏图标显示偏小的修复。(#858 / #867)

    三、升级注意事项

    1. 建议 Snapmaker 设备固件升级至 2.0.0 或更高版本后再更新本版(#862)。

    四、致谢

    • @KuzuriAo——报告 macOS Space 链接打开模型被丢弃的问题(#851),定位根因并提交修复(#852);同时提交了 macOS 首页渲染回归的详细分析(#853)。

    • @elithecho(#854)、@Minecrafter8001(#859)、@schornhe(#864)等——感谢所有通过 #840 看板与 issue 反馈问题的 Alpha 测试用户,你们的报告让这些问题得以在本版修复或纳入跟进。

    五、已知问题(跟进中)

    以下问题正在核实与跟进中,进展将更新在各 issue:

    • 「上传并打印」打印机下拉框首次打开不显示打印机、「添加打印机」对话框无法关闭(#854)

    • U1 默认换料 G-code 在逐件打印模式下存在撞头风险(#859)

    • Orca 下发的风扇转速与 U1 实际不符(#864)

    已知问题集中维护在 #840 看板(持续更新)。不确定是否重复的问题也请直接提交,重复条目由我们统一处理。


    Snapmaker Orca 2.4.0 Beta is now available. This release keeps the feature set identical to the Alpha and focuses on fixing 6 issues collected during the Alpha testing period (2 of which were crashes), along with updates to the app icon and the web setup wizard / homepage logos. Feel free to upgrade and test — please report any problems via the #840 tracking board or GitHub issues.

    Note: This release includes everything from 2.4.0 Alpha — highlighting for selected models, the LOD (level-of-detail) system, automatic color selection for color-match mixing mode, High-Flow Hot End parameter support, 6 new filaments plus an expanded color library, and three major underlying dependency upgrades (OpenSSL 3.5.7 / macOS build environment / Flutter 3.41), among others. For the complete list, see the 2.4.0 Alpha release announcement. Only changes merged after the Alpha are listed below.


    1. Fixes (Alpha Testing Feedback)

    1. Fixed an issue on macOS where models opened from Snapmaker Space links were dropped. Reported and fixed by community user @KuzuriAo — many thanks! (#851 / #852)

    2. Fixed an occasional crash when sending a print job. When the device filament information cache was double-encoded, the connection-success callback would throw an exception and terminate the process; the fix has been applied on both the C++ side and the embedded web (Flutter) side. (#849 / #850)

    3. Fixed a crash when opening the preset comparison (diff) dialog. (#848)

    4. Fixed abnormal loading of embedded web pages on macOS. Web navigation now waits until processing is ready before proceeding; a runtime status report for the embedded web pages has also been added (a 2-minute watchdog, reported regardless of sign-in status) to help keep diagnosing blank-screen issues. (#857)

    5. Fixed the Home / Device pages failing to render (blank screen) on macOS. The issue stemmed from concurrent WKWebView loading combined with local network policy restrictions; the fix has been verified on two macOS machines. (#853 / #865)

    6. Fixed calibration failures caused by mismatched configuration value types. This was a lingering effect of the Alpha's process migration, affecting parameters such as enable_overhang_speed, initial_layer_speed, and slow_down_layer_time. (#861)

    2. Other Improvements

    1. Updated the app icon and the web setup wizard / homepage logos, including a fix for the Windows taskbar icon rendering too small. (#858 / #867)

    3. Upgrade Notes

    1. We recommend upgrading Snapmaker device firmware to 2.0.0 or higher before installing this version (#862)

    4. Acknowledgements

    • @KuzuriAo — reported the issue of models being dropped when opened from Snapmaker Space links on macOS (#851), located the root cause and submitted the fix (#852), and also provided a detailed analysis of the macOS Home page rendering regression (#853).

    • @elithecho (#854), @Minecrafter8001 (#859), @schornhe (#864), and others — thanks to all Alpha testers who reported issues through the #840 tracking board and GitHub issues; your reports made it possible to fix these problems in this release or take them into tracking.

    5. Known Issues (Under Investigation)

    The following issues are under investigation and being tracked; progress will be updated in the respective issues:

    • In the "Upload and Print" dialog, the printer dropdown shows no printers the first time it is opened, and the "Add Printer" dialog cannot be closed (#854)

    • The U1 default filament-change G-code poses a head-crash risk in one-at-a-time (sequential) printing mode (#859)

    • Fan speeds sent by Orca do not match what the U1 actually runs (#864)

    Known issues are centrally maintained in the #840 tracking board (continuously updated). If you are unsure whether an issue is a duplicate, please file it anyway — we will consolidate duplicate entries on our side.

  7. 2.4.0-alpha

    Expand

    GitHub Release

    Snapmaker Orca V2.4.0-Alpha-Release

    Snapmaker Orca 2.4.0 Alpha 发布公告 本次 2.4.0 Alpha 版本新增模型选中高亮显示、LOD(Level of Detail)层级细节系统、混色匹配自动模式颜色选择、高流量热端(High-Flow Hot End)参数支持等功能,并新增 6 款耗材丝、扩充多款耗材颜色库,完整清单见下方更新日志。同时,本版本完成了 OpenSSL、macOS 构建环境、Flutter 三项底层依赖的大版本升级,涉及所有联网功能、内置网页与 macOS 安装包——诚挚欢迎参与 Alpha 测试,测试指引见更新日志之后。


    一、新增项

    1. 新增模型选中高亮显示,优化交互选择体验。
    • 选中模型时,显示最大包络框的同时,以白色高亮显示模型边缘。

    • 在装配环境下,选中模型时,以黄色高亮显示模型边缘。

    1. 新增 LOD(Level of Detail)层级细节系统,提升复杂场景下的模型渲染效率。

    2. 混色匹配中的自动模式新增颜色选择功能,用户可选耗材颜色。

    3. 部分耗材与工艺新增高流量热端(High-Flow Hot End)参数支持,使用说明见:《U1 热端使用指南》。

    4. 新增 6 款耗材丝,均适配 Snapmaker U1:

    点击展开查看完整耗材清单

    耗材丝 适配喷嘴直径
    Snapmaker TPU 0.4 / 0.6 / 0.8 mm
    Snapmaker PEBA 90A 0.4 / 0.6 / 0.8 mm
    Snapmaker PLA Glow 0.6 / 0.8 mm
    Snapmaker PLA Rainbow 0.2 / 0.4 / 0.6 / 0.8 mm
    Snapmaker Support for PLA 0.2 mm
    Snapmaker PETG-CF 0.6 / 0.8 mm
    1. 新增多款耗材的颜色库:
    • Snapmaker PVA: 新增 1 个颜色
    • PETG Translucent: 新增 1 个颜色
    • Support for PLA: 新增 1 个颜色
    • Snapmaker PLA Rainbow: 新增 1 个颜色 (含5 个色值)
    • PLA Basic: 新增 2 个颜色
    • Snapmaker TPU: 新增 2 个颜色
    • PLA Full Spectrum: 新增 4 个颜色
    • Snapmaker PEBA 90A: 新增 5 个颜色
    • Snapmaker PLA Glow: 新增 5 个颜色
    • PLA Snapspeed: 新增 10 个颜色
    • PLA Silk: 新增 14 个颜色 二、优化项
    1. 整合并精简工艺预设列表。
    • 为简化工艺选择流程,本次更新对 Snapmaker U1 的工艺预设进行了精简合并。部分同层高但不同品质等级的预设(如“Fine”“High Quality”)已统一整合为“Standard”预设。
    • 详细映射关系见下表:

    点击展开查看被删除的工艺模板清单

    原工艺模板名称 对应简化版本
    0.08 Extra Fine @Snapmaker U1 (0.4 nozzle) 0.08mm Standard @Snapmaker U1 (0.4 nozzle)
    0.08 High Quality @Snapmaker U1 (0.4 nozzle) 0.08mm Standard @Snapmaker U1 (0.4 nozzle)
    0.12 Fine @Snapmaker U1 (0.4 nozzle) 0.12mm Standard @Snapmaker U1 (0.4 nozzle)
    0.12 High Quality @Snapmaker U1 (0.4 nozzle) 0.12mm Standard @Snapmaker U1 (0.4 nozzle)
    0.16 Optimal @Snapmaker U1 (0.4 nozzle) 0.16mm Standard @Snapmaker U1 (0.4 nozzle)
    0.16 High Quality @Snapmaker U1 (0.4 nozzle) 0.16mm Standard @Snapmaker U1 (0.4 nozzle)
    0.2 Strength @Snapmaker U1 (0.4 nozzle) 0.20mm Standard @Snapmaker U1 (0.4 nozzle)
    0.2 Standard @Snapmaker U1 (0.4 nozzle) 0.20mm Standard @Snapmaker U1 (0.4 nozzle)
    0.24 Draft @Snapmaker U1 (0.4 nozzle) 0.24mm Standard @Snapmaker U1 (0.4 nozzle)
    0.28 Extra Draft @Snapmaker U1 (0.4 nozzle) 0.28mm Standard @Snapmaker U1 (0.4 nozzle)
    0.06 High Quality @Snapmaker U1 (0.2 nozzle) 0.08mm High Quality @Snapmaker U1 (0.2 nozzle)
    0.06 Standard @Snapmaker U1 (0.2 nozzle) 0.08mm High Quality @Snapmaker U1 (0.2 nozzle)
    0.08 Standard @Snapmaker U1 (0.2 nozzle) 0.08mm High Quality @Snapmaker U1 (0.2 nozzle)
    0.08 High Quality @Snapmaker U1 (0.2 nozzle) 0.08mm High Quality @Snapmaker U1 (0.2 nozzle)
    0.10 Standard @Snapmaker U1 (0.2 nozzle) 0.10mm High Quality @Snapmaker U1 (0.2 nozzle)
    0.10 High Quality @Snapmaker U1 (0.2 nozzle) 0.10mm High Quality @Snapmaker U1 (0.2 nozzle)
    0.12 Standard @Snapmaker U1 (0.2 nozzle) 0.12mm Standard @Snapmaker U1 (0.2 nozzle)
    0.14 Standard @Snapmaker U1 (0.2 nozzle) 0.12mm Standard @Snapmaker U1 (0.2 nozzle)
    0.18 Standard @Snapmaker U1 (0.6 nozzle) 0.18mm Standard @Snapmaker U1 (0.6 nozzle)
    0.24 Standard @Snapmaker U1 (0.6 nozzle) 0.24mm Standard @Snapmaker U1 (0.6 nozzle)
    0.30 Strength @Snapmaker U1 (0.2 nozzle) 0.30mm Standard @Snapmaker U1 (0.6 nozzle)
    0.30 Standard @Snapmaker U1 (0.2 nozzle) 0.30mm Standard @Snapmaker U1 (0.6 nozzle)
    0.36 Standard @Snapmaker U1 (0.6 nozzle) 0.30mm Standard @Snapmaker U1 (0.6 nozzle)
    0.42 Standard @Snapmaker U1 (0.6 nozzle) 0.30mm Standard @Snapmaker U1 (0.6 nozzle)
    0.24 Standard @Snapmaker U1 (0.8 nozzle) 0.24mm Standard @Snapmaker U1 (0.8 nozzle)
    0.32 Standard @Snapmaker U1 (0.8 nozzle) 0.32mm Standard @Snapmaker U1 (0.8 nozzle)
    0.40 Standard @Snapmaker U1 (0.8 nozzle) 0.40mm Standard @Snapmaker U1 (0.8 nozzle)
    0.48 Standard @Snapmaker U1 (0.8 nozzle) 0.40mm Standard @Snapmaker U1 (0.8 nozzle)
    0.56 Standard @Snapmaker U1 (0.8 nozzle) 0.40mm Standard @Snapmaker U1 (0.8 nozzle)
    1. 优化了较大模型在切片过程中的稳定性。
    2. 优化了 G-code 文件上传和打印的稳定性。
    3. 升级 OpenSSL 库至 3.5.7 版本,优化了网络通信的安全性与稳定性。
    4. 为“小区域流量补偿”功能的“流量补偿模型”参数增加了默认值,减少用户手动配置步骤。 三、修复项
    5. 修复使用 GitHub 登录成功后,页面异常显示接口响应内容的问题。
    6. 修复 Windows 系统下,设备熄屏后导致 Orca 与设备联机状态异常的问题。
    7. 修复 Orca 联机失败时弹出异常对话框的问题。
    8. 修复使用第三方授权登录成功后,仍重复弹出登录提示窗的问题。
    9. 修复连续登录 24 小时后,系统异常弹出重新登录提示的问题。
    10. 缓解了各平台在弱网环境下,首页、设备页及预打印页出现白屏的问题(仅在2.4.0及以上版本生效)。
    11. 修复 Snapmaker PETG HF 在 0.4 mm 喷嘴下无官方颜色配置的问题。
    12. 修复在 0.4 mm 喷嘴下,Snapmaker PETG HF 耗材点击色块时仍显示旧色盘的问题。
    13. 修复因配置文件(hints.ini)内容缺失导致软件无法启动的问题。

    诚邀参与 Alpha 测试 本次 2.4.0 Alpha 除新增一批功能(见上方更新日志)外,还完成了三项底层依赖的大版本升级——此类组件平时稳定运行、最易被忽视,也最难通过内部测试完全覆盖。

    点击展开查看依赖升级清单

    升级项 从 → 到 影响范围
    OpenSSL(网络安全库) 1.1.1w → 3.5.7(LTS) 所有联网功能:登录、下载、发送打印、设备联机
    macOS 构建环境 CI 从 macos-14 迁至 macos-15(macOS 15 宿主 + Xcode 16 工具链) 仅 macOS 包:打包/签名/公证链路、老系统兼容、工具链级差异
    Flutter(内置网页框架) 3.24 → 3.41 所有内置网页:首页、登录、模型库、设备页、校准

    我们已在主流打印机型号上验证核心流程(导入 → 切片 → 发送打印 → 设备监控)可正常运行;但各类系统版本、旧固件、自建打印服务器、弱网等环境,仍需依靠真实使用加以覆盖。在非主流路径上遇到问题属于预期现象——每一条反馈都直接影响正式版质量,遇到问题请直接提交反馈,无需先行排查。

    以下环境我们内部最难覆盖,诚挚欢迎相应设备的用户参与验证:

    • macOS 旧系统用户(本次构建环境为历次最新,旧系统是差异最大的组合),以及已升级 macOS 26 (Tahoe) 的用户(建议进行一轮快速验证)
    • 弱网 / 企业网络 / 代理环境用户

    三项升级可能引发的问题

    • 网络与设备连接:登录失败或报证书错误、模型/预设下载失败、局域网找不到设备、发送打印失败、设备状态不刷新、熄屏后联机异常(Windows)

    • 内置网页:首页/登录/模型库/设备页白屏、样式错乱、中文输入异常、按钮点击无响应

    • macOS 专属:首次启动 Gatekeeper/公证校验异常("已损坏/无法验证")、旧系统上启动或渲染异常、界面细节回归(深浅色、字体、表格线);如遇启动即闪退,请立即反馈,此类问题对定位最有价值

    • 不受影响:本地导入、切片、导出 G-code 到 U 盘等纯离线流程未涉及本次升级组件

    升级注意事项 工艺预设已精简合并:同层高不同品质的预设(Fine / High Quality 等)已并入 Standard。如您有基于这些预设的自定义工艺,升级后请对照上方更新日志中的映射表检查参数是否符合预期——如发现映射有误,同样属于有效反馈,欢迎提交。

    已知问题 已知问题集中维护在 #840(持续更新)。如无暇逐一核对,不确定是否重复的问题也请直接提交,重复条目由我们统一处理。

    建议测试清单(约 30 分钟,按样本缺口程度排序)

    1. 冷启动 → 遍历设置页签(关注是否存在闪退或卡死)
    2. 登录账号 → 首页 → 下载模型(OpenSSL:登录与下载链路;本次包含多项登录链路修复,建议重点验证)
    3. 切片 → 局域网发送打印 → 设备页状态实时刷新(OpenSSL:设备联机链路)
    4. 自建打印服务器用户:连接并上传一次 G-code——目前测试样本最匮乏的场景
    5. 逐页打开首页/登录/模型库/设备页/校准等内置页面(Flutter:观察白屏、样式错乱、按钮无响应;可再于弱网或热点环境下复测一遍)
    6. macOS 用户:分别在深色与浅色模式下检查主窗口与设置页;macOS 12–14 用户额外留意启动和画布渲染
    7. 高流量热端:按《U1 热端使用指南》选择对应耗材与工艺切片打印,确认参数生效

    反馈方式 反馈渠道:GitHub Issues。本次 Alpha 版本的反馈收集期约为一周以上,之后我们将汇总反馈并发布正式版。

    • 最低要求:提供一张截图或一段录屏,并简述操作步骤与异常结果即可,其余信息我们将跟进询问

    • 信息越完整,定位越快(尽量包含):软件版本号、操作系统及版本(macOS 注明小版本);打印机型号与固件版本(连接类问题必填);复现步骤、实际现象与预期结果;日志——配置目录下 log/ 文件夹最新日志

    • 崩溃:崩溃后如弹出上报提示,请选择上报(Alpha 版本崩溃会自动标记回传,是定位最快的途径),并补充说明当时正在进行的操作 如您使用的机型属于主流列表且全流程顺利,也欢迎回复一句"型号 X + 固件 Y,全流程通过"——这对我们判断风险是否收敛同样重要。

    安装与回退 安装 Alpha 会沿用现有配置。新版可能对配置做单向迁移,装回正式版未必完全恢复,安装前请完整备份配置目录:

    • Windows:%AppData%\Snapmaker_Orca\
    • macOS:~/Library/Application Support/Snapmaker_Orca/

    回退到正式版:建议先完全卸载 Alpha,再重新安装正式版


    ### New Features

    1. Added Highlight-on-Select for models to improve interaction experience
    • When a model is selected, its bounding box is displayed and its edges are highlighted in white.

    • In assembly mode, the selected model's edges are highlighted in yellow.

    1. Added LOD (Level of Detail) system to improve rendering efficiency in complex scenes.

    2. Added color selection in Auto Match Mode for Color Mixing Match. You can now select filament colors manually.

    3. Added High-Flow Hot End parameter support for select filaments and print profiles. For more information, refer to https://wiki.snapmaker.com/en/snapmaker_u1/hot_end_guide.

    4. Added 6 new filaments, all compatible with Snapmaker U1:

    Click to expand filament list

    Filament *Compatible Nozzle Diameters
    Snapmaker TPU 0.4 mm、0.6 mm、0.8 mm
    Snapmaker PEBA 90A 0.4 mm、0.6 mm、0.8 mm
    Snapmaker PLA Glow 0.6 mm、0.8 mm
    Snapmaker PLA Rainbow 0.2 mm、0.4 mm、0.6 mm、0.8 mm
    Snapmaker Support for PLA 0.2 mm
    Snapmaker PETG-CF 0.6 mm、0.8 mm
    1. Expanded color options for multiple filaments:
    • Snapmaker PVA: +1 color
    • PETG Translucent: +1 color
    • Support for PLA: +1 color
    • Snapmaker PLA Rainbow: +1 color (with 5 color values)
    • PLA Basic: +2 colors
    • Snapmaker TPU: +2 colors
    • PLA Full Spectrum: +4 colors
    • Snapmaker PEBA 90A: +5 colors
    • Snapmaker PLA Glow: +5 colors
    • PLA Snapspeed: +10 colors
    • PLA Silk: +14 colors

    Improvements

    1. Streamlined print profile presets.
    • Presets of the same layer height but different quality levels (e.g., "Fine" and "High Quality") have been merged into "Standard" presets.
    • The detailed mapping is shown below:

    Click to expand and view the list of deleted process templates.

    Original process template name Mapped To
    0.08 Extra Fine @Snapmaker U1 (0.4 nozzle) 0.08mm Standard @Snapmaker U1 (0.4 nozzle)
    0.08 High Quality @Snapmaker U1 (0.4 nozzle) 0.08mm Standard @Snapmaker U1 (0.4 nozzle)
    0.12 Fine @Snapmaker U1 (0.4 nozzle) 0.12mm Standard @Snapmaker U1 (0.4 nozzle)
    0.12 High Quality @Snapmaker U1 (0.4 nozzle) 0.12mm Standard @Snapmaker U1 (0.4 nozzle)
    0.16 Optimal @Snapmaker U1 (0.4 nozzle) 0.16mm Standard @Snapmaker U1 (0.4 nozzle)
    0.16 High Quality @Snapmaker U1 (0.4 nozzle) 0.16mm Standard @Snapmaker U1 (0.4 nozzle)
    0.2 Strength @Snapmaker U1 (0.4 nozzle) 0.20mm Standard @Snapmaker U1 (0.4 nozzle)
    0.2 Standard @Snapmaker U1 (0.4 nozzle) 0.20mm Standard @Snapmaker U1 (0.4 nozzle)
    0.24 Draft @Snapmaker U1 (0.4 nozzle) 0.24mm Standard @Snapmaker U1 (0.4 nozzle)
    0.28 Extra Draft @Snapmaker U1 (0.4 nozzle) 0.28mm Standard @Snapmaker U1 (0.4 nozzle)
    0.06 High Quality @Snapmaker U1 (0.2 nozzle) 0.08mm High Quality @Snapmaker U1 (0.2 nozzle)
    0.06 Standard @Snapmaker U1 (0.2 nozzle) 0.08mm High Quality @Snapmaker U1 (0.2 nozzle)
    0.08 Standard @Snapmaker U1 (0.2 nozzle) 0.08mm High Quality @Snapmaker U1 (0.2 nozzle)
    0.08 High Quality @Snapmaker U1 (0.2 nozzle) 0.08mm High Quality @Snapmaker U1 (0.2 nozzle)
    0.10 Standard @Snapmaker U1 (0.2 nozzle) 0.10mm High Quality @Snapmaker U1 (0.2 nozzle)
    0.10 High Quality @Snapmaker U1 (0.2 nozzle) 0.10mm High Quality @Snapmaker U1 (0.2 nozzle)
    0.12 Standard @Snapmaker U1 (0.2 nozzle) 0.12mm Standard @Snapmaker U1 (0.2 nozzle)
    0.14 Standard @Snapmaker U1 (0.2 nozzle) 0.12mm Standard @Snapmaker U1 (0.2 nozzle)
    0.18 Standard @Snapmaker U1 (0.6 nozzle) 0.18mm Standard @Snapmaker U1 (0.6 nozzle)
    0.24 Standard @Snapmaker U1 (0.6 nozzle) 0.24mm Standard @Snapmaker U1 (0.6 nozzle)
    0.30 Strength @Snapmaker U1 (0.2 nozzle) 0.30mm Standard @Snapmaker U1 (0.6 nozzle)
    0.30 Standard @Snapmaker U1 (0.2 nozzle) 0.30mm Standard @Snapmaker U1 (0.6 nozzle)
    0.36 Standard @Snapmaker U1 (0.6 nozzle) 0.30mm Standard @Snapmaker U1 (0.6 nozzle)
    0.42 Standard @Snapmaker U1 (0.6 nozzle) 0.30mm Standard @Snapmaker U1 (0.6 nozzle)
    0.24 Standard @Snapmaker U1 (0.8 nozzle) 0.24mm Standard @Snapmaker U1 (0.8 nozzle)
    0.32 Standard @Snapmaker U1 (0.8 nozzle) 0.32mm Standard @Snapmaker U1 (0.8 nozzle)
    0.40 Standard @Snapmaker U1 (0.8 nozzle) 0.40mm Standard @Snapmaker U1 (0.8 nozzle)
    0.48 Standard @Snapmaker U1 (0.8 nozzle) 0.40mm Standard @Snapmaker U1 (0.8 nozzle)
    0.56 Standard @Snapmaker U1 (0.8 nozzle) 0.40mm Standard @Snapmaker U1 (0.8 nozzle)
    1. Improved slicing stability for large models.
    2. Improved upload and printing stability for G-code files.
    3. Upgraded OpenSSL library to version 3.5.7, enhancing network communication security and stability.
    4. Added a default value for the "Flow Compensation Model" parameter when "Small area flow compensation" is enabled, reducing manual steps.

    Bug Fixes

    1. Fixed an issue where API response content was incorrectly displayed on the page after successful GitHub login.
    2. Fixed an issue on Windows where the device connection status became abnormal after the screen turned off.
    3. Fixed an issue where an unexpected error dialog appeared when Orca failed to connect to the device.
    4. Fixed an issue where the login prompt continued to appear after a successful third-party authorization login.
    5. Fixed an issue where the system incorrectly prompted for re-login after 24 hours of continuous login.
    6. Mitigated white screen issues on the Home page, Device page, and Preview page under weak network conditions on all platforms (effective only in 2.4.0 and later versions).
    7. Fixed an issue where Snapmaker PETG HF had no official color configuration under the 0.4 mm nozzle.
    8. Fixed an issue where the old color palette was still displayed when clicking the color swatch for Snapmaker PETG HF under the 0.4 mm nozzle.
    9. Fixed an issue where the software failed to launch due to missing content in the hints.ini file.

    Call for Alpha Testing The 2.4.0 Alpha release ships a batch of new features (see the changelog above), but more importantly, it moves three foundational dependencies to new major versions — components that normally run unnoticed, and the ones internal testing can never fully cover.

    Click to expand dependency upgrade list

    Component From → To Scope of impact
    OpenSSL (network security library) 1.1.1w → 3.5.7 (LTS) All networked features: sign-in, downloads, sending print jobs, device connectivity
    macOS build environment CI moved from macos-14 to macos-15 (macOS 15 host + Xcode 16 toolchain) macOS builds only: packaging/signing/notarization, older-OS compatibility, toolchain-level differences
    Flutter (embedded web framework) 3.24 → 3.41 All embedded web pages: Home, sign-in, model library, device page, calibration

    We have verified the core workflow (import → slice → send to printer → monitor) on mainstream printer models. But the variety of real-world environments — OS versions, older firmware, self-hosted print servers, weak networks — can only be covered by real usage. Running into problems on less common paths is expected — every report directly shapes the quality of the final release. Please report what you see directly; there is no need to troubleshoot first.

    The following environments are the hardest for us to cover internally, and users in these groups are especially welcome to participate:

    • Users on macOS (our build environment has never been this new, so older systems are the biggest gap), and users already on macOS 26 (Tahoe) — a quick smoke test would be greatly appreciated
    • Users on weak networks, corporate networks, or behind proxies

    Potential issues from the three upgrades

    • Network & device connectivity: sign-in failures or certificate errors, model/preset download failures, LAN device discovery failing, print upload failures, device status not refreshing, connection going abnormal after the screen turns off (Windows)
    • Embedded web pages: blank Home / sign-in / model library / device pages, broken styling, CJK input misbehaving, buttons not responding
    • macOS only: Gatekeeper/notarization issues on first launch ("damaged / cannot be verified"), startup or rendering problems on older systems, visual regressions (dark mode, fonts, table lines). If the app crashes on launch, please report it immediately — such reports are especially valuable
    • Not affected: purely offline workflows — local import, slicing, exporting G-code to USB — do not touch the upgraded components

    Upgrade notes Process presets have been consolidated. Presets of the same layer height but different quality tiers (Fine / High Quality, etc.) have been merged into Standard presets. If you have custom processes based on them, please check them against the mapping tables in the changelog above — if the mapping looks incorrect, that is also valid feedback — please report it.

    Known issues Tracked in #840 (continuously updated). If you are not sure whether an issue is already known, please report it anyway; duplicates will be consolidated on our side.

    Suggested test checklist (~30 minutes, ordered by sample coverage need)

    1. Cold start → walk through all settings tabs (watch for crashes/freezes)
    2. Sign in → Home page → download a model (OpenSSL: the sign-in and download paths; this release includes several sign-in fixes, so this path deserves extra attention)
    3. Slice → send over LAN → watch device status update in real time (OpenSSL: the device connectivity path)
    4. Self-hosted print server users: connect and upload one G-code file — the scenario where we lack samples the most
    5. Open the embedded pages one by one — Home, sign-in, model library, device page, calibration (Flutter: watch for blank screens, broken styling, buttons not responding; a weak-network pass is a bonus)
    6. macOS users: check the main window and settings in both light and dark mode; on macOS 12–14, pay extra attention to startup and canvas rendering
    7. High-Flow Hot End: follow the Hot End guide to slice and print with a supported filament and profile, and confirm the parameters take effect

    How to provide feedback Channels: GitHub Issues. We plan to collect feedback for about one week, then incorporate it into the stable release.

    • Minimum requirements: a screenshot or screen recording plus one sentence describing what you did and what went wrong is enough; we will follow up with any questions
    • The more info, the faster the fix (when possible): app version, OS and version (macOS users: exact minor version); printer model and firmware version (required for connectivity issues); steps to reproduce, expected vs actual; logs — the latest file under log/ in the config directory
    • Crashes: when prompted after a crash, please allow the report to be sent (alpha crashes are tagged automatically, which is the fastest path to a fix), then add a short note about what you were doing If your printer is on the mainstream list and everything went smoothly, a one-line reply like "Model X + firmware Y, full workflow OK" is just as valuable — it helps us confirm the risks are contained.

    Install & rollback Installing the Alpha keeps your existing configuration. The new version may migrate configuration one-way, so rolling back may not fully restore it — back up the whole config directory before installing:

    • Windows: %AppData%\Snapmaker_Orca\
    • macOS: ~/Library/Application Support/Snapmaker_Orca/

    To roll back to the stable release, fully uninstall the Alpha first and then reinstall the stable version

  8. 2.3.6-prerelease

    Expand

    GitHub Release

    Snapmaker Orca V2.3.6 Pre-Release

    新增项

    1. 新增延时摄影文件导出功能, 仅固件 V1.6.0 及以上的版本支持。
    • 在发送打印前,请确认在偏好设置中已勾选延时摄影。
    • 打印完成后,可在本地文件中下载延时摄影视频。
    1. 新增打印偏好设置功能,支持炒面检测(Spaghetti Detection)和异物检测。
    • 打印过程中,若系统检测到炒面缺陷或异物,将在软件界面或设备端发出提醒,帮助您及时处理异常。
    1. 新增相机适配功能,支持一键自动缩放和平移摄像机,完整展示场景内全部或当前选中的模型。

    2. 新增混色匹配映射功能,支持多色模型(尤其是超过4色)自动获取色域内可靠的匹配方案。

    • 新增适配混色匹配的工艺预设:0.10mm Color Mixing @Snapmaker U1 (0.4 nozzle)。
    1. 新增耗材 Snapmaker PLA Full Spectrum,适配直径为 0.2mm 和 0.6mm 的喷嘴。
    • 请选择内置的“Snapmaker PLA Full Spectrum”参数包,搭配混色功能以获得更好的色彩效果。
    • 推荐使用 0.4 mm 及以下口径的热端,搭配 0.1 mm 及以下的层高进行打印。若使用更大口径的热端和更高的层高,可能导致成品出现明显横纹。
    • 操作指引:可参考 https://wiki.snapmaker.com/zh/snapmaker_orca/snapmaker_orca_full_spectrum

    优化项

    1. 优化耗材同步功能中的颜色匹配算法。
    2. 优化视图区渲染性能。
    • 仅渲染视野内的模型部分,有效减少卡顿,提升操作流畅度。

    修复项

    1. 修复在 Windows / Linux 系统下,对满盘模型进行切片时因内存占用过大导致软件崩溃的问题。
    • 现已增加内存守护行为,在满盘切片时,将提示您是否继续切片。
    1. 修复不同耗材的床板温度兼容问题。当使用的多种耗材所需的床板温度不一致时,系统默认选取较高温度。
    2. 修复使用全盘整理功能时, Orca 闪退的问题。
    3. 修复在混色功能中使用标签页(Tab)切换页面后,匹配模式比例展示异常的问题。
    4. 修复在 Windows 系统上新增耗材或机器配置时,界面加载慢的问题。
    5. 修复在 Windows 系统上导入文件名包含特殊字符(如扩展 Unicode 字符或 emoji)的模型文件时,Orca 显示为空模型、加载失败的问题。
    6. 修复在国内环境下,用户在 App 端改密码后, Orca 端登录失效的问题。
    7. 修复重复导入同一 G-code 文件时,软件意外崩溃的问题。
    8. 修复在 V2.3.5 版本中,从“准备”页切换至“预览”页时,系统自动切片所有打印盘的问题。现优化为仅切片当前在“准备”页中选中的盘。
    9. 修复档耗材的流量比例设置为0时,仍可继续切片的问题。现改为阻止切片并弹出错误提示窗口。
    10. 修复将 Orca 设为 G-code 文件默认打开程序后,双击 G-code 文件导致软件崩溃的问题。

    New Features

    1. Added Time-lapse Video Export (requires firmware V1.6.0 or later)

    a. To enable this feature, check the Time-lapse option in Print References before sending a print job. b. After printing completes, you can download the time-lapse video to your local device.

    1. Added Print Preferences with support for Spaghetti Detection and Foreign Object Detection. These features help you identify anomalies during printing and take timely action.

    2. Added a one-click auto-zoom and camera pan feature that instantly reframes the view to display all models in the scene or focus on the selected model(s).

    3. Added Color Mixing Match Mapping, which automatically generates an optimal color matching solution within the reliable color gamut for multi-color models (especially those with more than 4 colors). a. Added a new process preset for color mixing: 0.10mm Color Mixing @Snapmaker U1 (0.4 nozzle).

    4. Added support for Snapmaker PLA Full Spectrum, compatible with 0.2 mm and 0.6 mm nozzles.

    5. Select the built-in "Snapmaker PLA Full Spectrum" parameter package to use the color mixing feature and achieve better printing results.

    6. We recommend using a hot end of 0.4 mm or smaller, combined with a layer height of 0.1 mm or less. Using a larger hot end or higher layer height may result in visible layer lines on the final print.

    7. For guidance, refer to: https://wiki.snapmaker.com/en/snapmaker_orca/snapmaker_orca_full_spectrum Improvements

    8. Optimized the color matching algorithm for filament synchronization.

    9. Optimized Viewport Rendering Performance.

    10. Enhanced viewport rendering efficiency by culling out-of-view geometry, reducing unnecessary draw calls and improving overall responsiveness.

    Bug Fixes

    1. Fixed an issue where the software crashed during full-bed slicing on Windows/Linux due to excessive memory usage. A memory protection mechanism has been added to prompt you before proceeding with full-bed slicing.
    2. Fixed a bed temperature compatibility issue when using multiple filaments with different required bed temperatures. The system now defaults to the higher temperature.
    3. Fixed an issue where Orca crashed when using the Full Bed Arrangement function.
    4. Fixed an issue where the Match mode ratio display was incorrect after switching tabs in the Color Mixing interface.
    5. Fixed an issue where the interface loaded slowly when adding new filaments or machine configurations on Windows.
    6. Fixed an issue on Windows where model files with special characters (e.g., extended Unicode characters or emojis) in their filenames were imported as empty models or failed to load.
    7. Fixed an issue where Orca login became invalid after changing the password via the App under specific network conditions.
    8. Fixed an issue where the software crashed when repeatedly importing the same G-code file.
    9. Fixed an issue in V2.3.5 where switching from the Prepare page to the Preview page automatically sliced all plates. It now slices only the plate currently selected in the Prepare page.
    10. Fixed an issue where slicing could proceed even when the filament flow ratio was set to 0. Slicing is now blocked and an error message is displayed.
    11. Fixed an issue where double-clicking a G-code file (with Orca set as the default G-code viewer) caused the software to crash.
  9. 2.3.6

    Expand

    GitHub Release

    新增项

    1. 新增延时摄影文件导出功能, 仅固件 V1.6.0 及以上的版本支持。
    • 在发送打印前,请确认在偏好设置中已勾选延时摄影。
    • 打印完成后,可在本地文件中下载延时摄影视频。
    1. 新增打印偏好设置功能,支持炒面检测(Spaghetti Detection)和异物检测。
    • 打印过程中,若系统检测到炒面缺陷或异物,将在软件界面或设备端发出提醒,帮助您及时处理异常。
    1. 新增相机适配功能,支持一键自动缩放和平移摄像机,完整展示场景内全部或当前选中的模型。

    2. 新增混色匹配映射功能,支持多色模型(尤其是超过4色)自动获取色域内可靠的匹配方案。

    1. 新增耗材 Snapmaker PLA Full Spectrum,适配直径为 0.2mm 和 0.6mm 的喷嘴。
    • 请选择内置的“Snapmaker PLA Full Spectrum”参数包,搭配混色功能以获得更好的色彩效果。
    • 推荐使用 0.4 mm 及以下口径的热端,搭配 0.1 mm 及以下的层高进行打印。若使用更大口径的热端和更高的层高,可能导致成品出现明显横纹。
    • 操作指引:可参考 https://wiki.snapmaker.com/zh/snapmaker_orca/snapmaker_orca_full_spectrum

    优化项

    1. 优化耗材同步功能中的颜色匹配算法。
    2. 优化视图区渲染性能。
    • 仅渲染视野内的模型部分,有效减少卡顿,提升操作流畅度。

    修复项

    1. 修复在 Windows / Linux 系统下,对满盘模型进行切片时因内存占用过大导致软件崩溃的问题。
    • 现已增加内存守护行为,在满盘切片时,将提示您是否继续切片。
    1. 修复不同耗材的床板温度兼容问题。当使用的多种耗材所需的床板温度不一致时,系统默认选取较高温度。
    2. 修复使用全盘整理功能时, Orca 闪退的问题。
    3. 修复在混色功能中使用标签页(Tab)切换页面后,匹配模式比例展示异常的问题。
    4. 修复在 Windows 系统上新增耗材或机器配置时,界面加载慢的问题。
    5. 修复在 Windows 系统上导入文件名包含特殊字符(如扩展 Unicode 字符或 emoji)的模型文件时,Orca 显示为空模型、加载失败的问题。
    6. 修复在国内环境下,用户在 App 端改密码后, Orca 端登录失效的问题。
    7. 修复重复导入同一 G-code 文件时,软件意外崩溃的问题。
    8. 修复在 V2.3.5 版本中,从“准备”页切换至“预览”页时,系统自动切片所有打印盘的问题。现优化为仅切片当前在“准备”页中选中的盘。
    9. 修复耗材的流量比例设置为0时,仍可继续切片的问题。现改为阻止切片并弹出错误提示窗口。
    10. 修复将 Orca 设为 G-code 文件默认打开程序后,双击 G-code 文件导致软件崩溃的问题。

    New Features

    1. Added Time-lapse Video Export (requires firmware V1.6.0 or later)

    a. To enable this feature, check the Time-lapse option in Print References before sending a print job. b. After printing completes, you can download the time-lapse video to your local device.

    1. Added Print Preferences with support for Spaghetti Detection and Foreign Object Detection. These features help you identify anomalies during printing and take timely action.

    2. Added a one-click auto-zoom and camera pan feature that instantly reframes the view to display all models in the scene or focus on the selected model(s).

    3. Added Color Mixing Match Mapping, which automatically generates an optimal color matching solution within the reliable color gamut for multi-color models (especially those with more than 4 colors). a. Added a new process preset for color mixing: 0.10mm Color Mixing @Snapmaker U1 (0.4 nozzle).

    b. For guidance, refer to: https://wiki.snapmaker.com/en/snapmaker_orca/color_mixing_match_guide

    1. Added support for Snapmaker PLA Full Spectrum, compatible with 0.2 mm and 0.6 mm nozzles.

    2. Select the built-in "Snapmaker PLA Full Spectrum" parameter package to use the color mixing feature and achieve better printing results.

    3. We recommend using a hot end of 0.4 mm or smaller, combined with a layer height of 0.1 mm or less. Using a larger hot end or higher layer height may result in visible layer lines on the final print.

    4. For guidance, refer to: https://wiki.snapmaker.com/en/snapmaker_orca/snapmaker_orca_full_spectrum Improvements

    5. Optimized the color matching algorithm for filament synchronization.

    6. Optimized Viewport Rendering Performance.

    7. Enhanced viewport rendering efficiency by culling out-of-view geometry, reducing unnecessary draw calls and improving overall responsiveness.

    Bug Fixes

    1. Fixed an issue where the software crashed during full-bed slicing on Windows/Linux due to excessive memory usage. A memory protection mechanism has been added to prompt you before proceeding with full-bed slicing.
    2. Fixed a bed temperature compatibility issue when using multiple filaments with different required bed temperatures. The system now defaults to the higher temperature.
    3. Fixed an issue where Orca crashed when using the Full Bed Arrangement function.
    4. Fixed an issue where the Match mode ratio display was incorrect after switching tabs in the Color Mixing interface.
    5. Fixed an issue where the interface loaded slowly when adding new filaments or machine configurations on Windows.
    6. Fixed an issue on Windows where model files with special characters (e.g., extended Unicode characters or emojis) in their filenames were imported as empty models or failed to load.
    7. Fixed an issue where Orca login became invalid after changing the password via the App under specific network conditions.
    8. Fixed an issue where the software crashed when repeatedly importing the same G-code file.
    9. Fixed an issue in V2.3.5 where switching from the Prepare page to the Preview page automatically sliced all plates. It now slices only the plate currently selected in the Prepare page.
    10. Fixed an issue where slicing could proceed even when the filament flow ratio was set to 0. Slicing is now blocked and an error message is displayed.
    11. Fixed an issue where double-clicking a G-code file (with Orca set as the default G-code viewer) caused the software to crash.
  10. 2.3.5

    Expand

    OpenNavo editorial Added to Homebrew

    Adds top-cover controls, filament sync, an official color library, and Snapmaker PVA support. Updates mixing and layer-height behavior, changes the wipe tower, and fixes project, resource, and startup issues.

    New
    Added top-cover controls and printer-to-Orca filament sync.Added an official color library for dual-color filaments.Added Snapmaker PVA; optimized PLA-CF and TPU profiles.Warns when variable and subdivided mix layer heights are both enabled.
    Mixing
    In Color Mixing, incompatible filament combinations block slicing.Fixed Match recommendations below a configured 30% minimum.Fixed unintended layer subdivision in single-color regions.
    Fixes
    Fixed project filament types and wipe-tower material estimates.Fixed interference between wipe-tower and model Brim paths.Fixed hot-update resources and startup hangs on some PCs.Support layer height is available with the tower on; unchecked by default.

    Snapmaker Orca 2.3.5 adds top-cover controls and filament synchronization from the printer to Orca using Match Mapping or Direct Override. The official filament color library supports dual-color official filaments. The release adds Snapmaker PVA support and optimizes the Snapmaker PLA-CF and Snapmaker TPU profiles. A warning appears when Variable Layer Height and Subdivide Mix Layer are enabled together. In Color Mixing mode, incompatible filament combinations block slicing and display an error.

    The wipe-tower outer wall now has an opening. Fixes address incorrect filament types when reopening a saved project after reducing its filament count, recommendations below a configured 30% minimum mixing ratio, and unintended layer subdivision in single-color regions. The release also corrects wipe-tower material estimates and Brim interference, and fixes resource use after hot updates and startup unresponsiveness on some PCs. Independent Support Layer Height can be displayed without disabling the wipe tower and is unchecked by default.

    Official release notes

  11. 2.3.4

    Expand

    OpenNavo editorial Added to Homebrew

    Fixes filament mapping, painted-model slicing, infill settings, Fuzzy Skin painting, and first-layer sparse infill alignment.

    Fixes
    Fixed filament mapping for Generic Support for PLA.Fixed slicing artifacts and missing geometry on painted dome models.Re-enabled infill settings for Filament for Features.Fixed incorrect Fuzzy Skin results in painted areas.Fixed first-layer sparse infill misalignment.

    Snapmaker Orca 2.3.4 fixes an issue that prevented filament mapping from working on the Print Preprocessing page when Generic Support for PLA was selected. Slicing painted models with dome-shaped structures no longer produces maze-like or island-like artifacts or loses parts of the geometry.

    In Process > Multimaterial > Filament for Features, infill parameter settings are available again. The release also fixes Fuzzy Skin painting so it is generated in the painted areas rather than incorrectly appearing in unpainted areas, and corrects sparse infill pattern alignment on the first layer.

    Release notes

  12. 2.3.3

    Expand

    GitHub Release Added to Homebrew

    New Features

    1. Introduced Full Spectrum printing. (1) Color Mixing
    Ratio Ratio Cycle Match Gradient
    Supports mixing of two or three filament colors Support mixing of two or three filament colors Supports mixing by entering filament color codes Supports matching mix effect to a target color Supports creating a gradient effect by mixing two filament colors

    (2) Subdivide Mixing Layers

    Subdivide mixing layers Full domain Apply subdivision to infill
    When enabled, layer height for mixing areas will be subdivided for better color mixing results. When enabled, subdivided layer height applies to all mixed-color regions on outer walls, whether the colors are created by painting or filaments changes. When enabled, infill within mixed-color regions is subdivided using the same settings.
    1. Added support for new filament types for the Snapmaker U1.

    Click to expand filament list

    Series Filament types Nozzle diameter
    Generic PC, Support for PLA 0.2 / 0.4 / 0.6 / 0.8 mm
    Snapmaker Breakaway Support for PLA 0.2 / 0.6 / 0.8 mm
    Snapmaker PETG HF 0.2 / 0.6 / 0.8 mm
    Snapmaker PETG-CF 0.4 mm
    Snapmaker PETG Translucent 0.2 / 0.4 / 0.6 / 0.8 mm
    Snapmaker PLA Full Spectrum 0.4 mm
    Snapmaker PLA Glow 0.4 mm
    Snapmaker PLA Silk 0.2 / 0.6 / 0.8 mm
    Snapmaker PLA Translucent 0.2 / 0.4 / 0.6 / 0.8 mm
    Snapmaker PLA Wood 0.4 / 0.6 / 0.8 mm
    Snapmaker PLA-CF 0.4 / 0.6 / 0.8 mm
    Snapmaker PVA 0.6 / 0.8 mm
    Snapmaker TPU 90A 0.6 / 0.8 mm
    Snapmaker TPU 95A HF 0.6 / 0.8 mm

    Improvements

    1. Optimized the rib structure of the prime tower. A quadratic programming approach is used to constrain the rib area to a square shape, enhancing the stability of the prime tower during printing.

    2. Optimized printing from local files. The system can now correctly configure the filament-to-nozzle mapping even when the filament density is 0, preventing printing anomalies.

    Bug Fixes

    1. Fixed an issue where the first layer of the prime tower could exceed limits under certain process parameter configurations.

    2. Fixed a series of issues that could occur when a 3MF file contained more filaments than available extruders: (1) Excess filaments could not be saved.

    (2) Slicing could fail.

    (3) Filament mapping between the software and the printer could be incorrect on the Print Preprocessing page.

    1. Fixed an issue where Upload and Upload and Print were unavailable when port 13619 was occupied by another process.

    2. Fixed an issue where filament mapping could fail when starting a print directly from the built-in model library.

    新增项

    1. 新增全彩打印(Full Spectrum)特性。

    (1)混色功能

    比例模式 比例模式 循环模式 匹配模式 渐变模式
    支持两种或三种耗材颜色混合 支持通过输入耗材编号进行混合 支持基于目标颜色匹配混色效果 支持两种耗材颜色混合形成渐变效果

    (2)混色细分层高

    混色细分层高 全域生效 应用到填充
    启用后,混色区域的层高将被细分,以实现更好的混色效果。 启用后,通过涂色或更换耗材丝为模型上色,细分层高将对所有外墙的混色区域生效。 启用后,对混色区域内的填充部分进行相同的细分处理。
    1. 新增适配 Snapmaker U1 的耗材种类。

    点击展开查看完整耗材清单

    所属系列 耗材类型 适配喷嘴尺寸
    Generic PC 0.4 / 0.6 / 0.8 mm
    Support for PLA 0.2 / 0.6 / 0.8 mm
    Snapmaker Breakaway Support for PLA 0.2 / 0.6 / 0.8 mm
    PETG HF 0.2 / 0.6 / 0.8 mm
    PETG-CF 0.4 mm
    PETG Translucent 0.2 / 0.4 / 0.6 / 0.8 mm
    PLA Full Spectrum 0.4 mm
    PLA Glow 0.4 mm
    PLA Silk 0.2 / 0.6 / 0.8 mm
    PLA Translucent 0.2 / 0.4 / 0.6 / 0.8 mm
    PLA Wood 0.4 / 0.6 / 0.8 mm
    PLA-CF 0.4 / 0.6 / 0.8 mm
    PVA 0.6 / 0.8 mm
    TPU 90A 0.6 / 0.8 mm
    TPU 95A HF 0.6 / 0.8 mm

    优化项

    1. 优化擦拭塔的肋条(Rib)结构。采用二次规划的方法,将 Rib 区域的形状约束为正方形,以增强擦拭塔在打印过程中的稳定性。

    2. 优化从设备本地文件发起打印的功能。当耗材密度为 0 时,系统仍能正确设置打印喷嘴映射,避免出现打印异常。

    修复项

    1. 修复在某些工艺参数配置下,擦拭塔首层超限的问题。

    2. 修复 3MF 文件中耗材数量超过挤出机数量而引发的一系列问题: (1)超出部分的耗材无法保存;

    (2)可能导致切片失败;

    (3)在预打印页面中,软件与设备的耗材映射出错。

    1. 修复当 13619 端口被其他进程占用时,无法点击上传或上传并打印的问题。

    2. 修复从内置模型库直接发起打印时,耗材映射失效的问题。

  13. 2.3.1

    Expand

    GitHub Release Added to Homebrew

    Snapmaker Orca

    New Features

    1. Added nozzles of 0.2mm, 0.6mm, and 0.8mm.

    2. Added "Graphic Effect Plate", and renamed "Smooth High Temp Plate" to "Smooth PEI Plate".

    3. Added new official filament types, now supporting multiple Silk Dual-Color PLA filaments.

    4. After clicking Print Now in the Model Library, a plate selection option is now available on the Print Preprocessing page.

    Bug Fixes

    1. Fixed an issue where Web resource packages and process profiles could fail to update.
    2. Fixed an issue where server-side message backlogs caused devices in Cloud Mode to receive numerous outdated messages.
    3. Fixed an issue where some U1 printers failed to retrieve filament information after connecting. Improvements
    4. Optimized the camera countdown feature: removed the countdown in Cloud Mode, and cancelled the 5-minute limit in LAN Mode.

    Snapmaker Orca

    新增项

    1. 新增 0.2mm、0.6mm、0.8mm 喷嘴。

    2. 新增 “特效纹理热床”,修改 “光滑高温打印热床” 为 “光面 PEI 热床”。

    3. 新增官方耗材种类,现已支持多款双色丝绸 PLA 耗材。

    4. 点击模型库中的 “直接打印” 后,在打印预处理页面新增了分盘选择功能。

    修复项

    1. 修复了 Web 资源包和工艺更新失败的问题。
    2. 修复了云联设备时,因服务端消息积压导致设备收到大量过期消息的问题。
    3. 修复了部分 U1 联机后获取设备耗材异常的问题。 优化项
    4. 优化摄像机的倒计时功能。云模式下移除倒计时,局域网模式下取消 5 分钟限制。
  14. 2.3.0

    Expand

    GitHub Release Added to Homebrew

    New Features

    1. Added a Model Library section, allowing you to download 3MF files and start print jobs directly online.
    2. Added new official material types.
    3. Added color options for third-party materials.

    Bug Fixes

    1. Fixed an issue where the software crashed when printing with filaments that use a transparent channel.
    2. Fixed occasional lag in certain HTTP requests.
    3. Fixed abnormal page redirection when switching, adding, or removing printer models.
    4. Fixed an issue where U1 disconnected in LAN mode.

    Improvements

    1. Corrected the name of Polymaker filaments.
  15. 2.2.4

    Expand

    GitHub Release Added to Homebrew

    New Features

    1. Snapmaker Orca now supports independent updates for Mainland China and other regions.

    2. Introduced hot update support for Snapmaker Orca process presets.

    3. Introduced hot update support for Snapmaker Orca web resources.

    4. Added the chamfer feature for the prime tower brim to enhance the stability of the Rib prime tower.

    5. Introduced new material types, including Snapmaker PETG HF, Snapmaker TPU 95A HF, Generic PETG HF, and Generic TPU 95A HF.

    Bug Fixes

    1. Fixed an issue where Snapmaker Orca could not be launched in certain Windows 11 environments.

    2. Fixed an issue where the process migration feature failed when switching between machine models.

    3. Fixed an issue where extrusion lines or travel paths were generated outside the build plate when using a Rib wipe tower.

    4. Fixed filament synchronization issues that could occur when connecting to the device. For example, in cases where filaments were not installed from the filament library, the new version resolves:

    • An issue where Snapmaker PLA Snapspeed density being 0 could prevent print jobs from being sent;

    • An issue where Generic PETG with a first-layer PEI steel sheet bed temperature set to 0 could cause poor first-layer print quality.

    1. Fixed an issue that caused the software to crash in certain scenarios.

    2. Fixed an issue where Bambu Lab printer models could not be selected on the Prepare page.

    3. Fixed Italian translation inaccuracies on Windows.

    4. Fixed an issue where the IP address reported by the device to Snapmaker Orca is inconsistent with its actual IP address, causing problems such as being unable to retrieve material information or unable to print on the Print Preprocessing page.

    5. Fixed an issue where users had to log in frequently.

    Improvements

    1. Improved the warning for spiral lifting near the build plate boundaries.

    2. Optimized the popup scenario when switching between multiple pages.

    3. Improved the monitoring retrieval efficiency and file upload efficiency when the computer and device are on the same local network.

  16. 2.2.3-prerelease

    Expand

    GitHub Release

    Snapmaker Orca V2.2.3 Beta Release

    New Features

    • Snapmaker Orca now supports independent updates for China Mainland and other regions
    • Integration of a process hot-update mechanism for Snapmaker Orca
    • Integration of a web resource hot-update mechanism for Snapmaker Orca

    Bug Fixes

    • Fixed an issue where using a Rib purge tower caused the generation of extrusion or travel moves outside the print bed

    • Fixed an issue with incorrect filament synchronization when connecting to the printer (under conditions where filaments were not installed from the filament library)

      • Snapmaker PLA Snapspeed density being 0, which prevented print jobs from being sent
      • Generic PETG first-layer PEI bed temperature being 0, which led to poor first-layer print quality
    • Fixed several scenarios causing software crashes

    • Fixed an issue where Bambu printer models could not be selected on the Prepare page

    • Fixed incorrect Italian translations in the Windows version

    Experience Optimizations

    • Added a risk warning for spiral lift near the print bed boundaries
  17. 2.2.1

    Expand

    GitHub Release Added to Homebrew

    Snapmaker Orca 2.2.1 Release Notes

    New Features

    1. Integrated new features from OrcaSlicer since V2.2.0. Snapmaker Orca 2.2.1 is now aligned with the official OrcaSlicer V2.3.1 release.
    1. Added error reporting functionality during operation.
    2. Introduced the User Experience Improvement Program.
    3. Adapted to the device's AI detection functionality.
    4. Added network testing functionality.

    Fixes & Improvements

    1. Optimized the device binding and connection procedures when using Snapmaker Orca or Snapmaker App.
    2. Enhanced device control under unstable network conditions.
    3. Improved reliability of slice files uploads under unstable network conditions.
    4. Refined the interaction experience between the device and the software / App when switching device binding modes (Cloud mode / LAN mode) and logging out on the touch screen.
    5. Enhanced the operation experience when enabling the camera.

    Known Issues

    1. The network testing feature may require optimization in certain scenarios.
    2. The Linux version is not yet fully compatible.
  18. 2.1.5

    Expand

    GitHub Release

    Snapmaker Orca 2.1.5 Release Notes

    Snapmaker Orca V2.1.5 aims to address several blocking issues present in the V2.1.2 version.

    1. Optimized login interface
    2. Optimized monitoring functionality
    3. Updated multilingual content for specific fields
  19. 2.1.2

    Expand

    GitHub Release

    Snapmaker Orca 2.1.2 Release Notes

    Snapmaker Orca V2.1.2 aims to address several blocking issues present in the V2.1.1 version.

    Bug Fix

    1. Fix for G-code files containing characters unrecognized by devices in European language environments.
    2. Fix for PCs Without Unicode-Based Global Language Support Failing to Connect to Devices
  20. 2.1.1

    Expand

    GitHub Release

    Snapmaker Orca 2.1.1 Release Notes

    Snapmaker Orca V2.1.1 addresses bugs in Snapmaker U1 device management and operations, improves error handling across scenarios, and enhances overall user experience. Additionally, new factory-validated default configurations are released (including new filaments and processes).

    New Features and Enhancements

    1. Profile & Engine
    • Integrated Profile Version 02.02.39.02

      • Filament Support
      • Process Optimization
    • Snapmaker U1 now supports M220 B and M220 R commands for speed control during printing

    • Enhanced G-code upload with filename guidance

    1. U1 Device Improvements
    • Material-specific bed temperature configuration based on plate type

    • Refined device error messages with standardized terminology

    • Added file download progress indicators in Cloud Mode

    • Improved filament mapping logic for local file printing

    • Enhanced data encryption in real-time monitoring module

    • Added regional mismatch alerts for PIN binding

    • Added firmware compatibility checks

    Bug Fixes

    • Fixed frequent flickering on preparation page when opening upload page
    • Resolved filament mapping issues on device page
    • Corrected bed temperature display (0°C issue) for SM2 machines
    • Improved connectivity handling in weak network environments
    • Fixed occasional device monitoring failures on first launch
    • Enhanced PC network disconnection handling during monitoring
    • Addressed intermittent large file upload/print failures in Cloud Mode
    • Fixed MQTT network termination popup issue in Cloud Mode

    Known Issues

    • UI adaptation issues on Ubuntu 22.04
    • Occasional calculation errors in multi-filament slicing
  21. 2.1.0-prerelease

    Expand

    GitHub Release

    Snapmaker Orca V2.1.0 Beta Release

    Snapmaker Orca 2.1.0-Beta1 Release note

    Snapmaker Orca V2.1.0-Beta1 has comprehensively added print presets, machine control, and machine management content tailored for the Snapmaker U1 model; additionally, it has fixed some bugs at the slicing engine level and provided corresponding custom configuration options to refine slicing effect customization. Below are detailed descriptions:

    New Features and Enhancement:

    1. Added Pages & UI Updates

    • Updated Home Page

      • Added a "My Devices" module to manage Snapmaker U1 machines
    • Updated Snapmaker U1 Device Page, access paths:

      • On the Preparation Page, select Snapmaker U1 model, then click the device tab to enter the U1 Device Page
    • Added Pre-upload Page & Pre-print Page

      • Preparation Page - Add Model - Slice - Print - Upload / Upload and Print
    • Preparation Page UI Adjustments

      • Updated UI interaction logic in the Print Area

    2. Snapmaker U1 Machine Management

    2-1 Adding a Device

    • Entry Points:

      • Provided device addition entry points on the Home Page, Device Page, and Pre-print Page
    • Nearby Device Discovery: Displays U1 devices on the same local network

      • Click "Add Device":

        • "Lan Mode" indicates the device has LAN mode enabled
        • No "Lan Mode" indicates the device supports cloud binding (cloud-mode devices are only displayed when logged in)
        • Refresh Button - Updates nearby devices
    • Adding a LAN Mode Device:

      • Nearby Devices - Connect - Authorize via Device Screen - Connection Successful - Generate Device Card
      • Bind via IP - Enter Device IP - Authorize via Device Screen - Connection Successful - Generate Device Card
    • Binding a Cloud Device:

      • Log in - Add Device - Nearby Devices - Connect - Authorize via Screen - Binding Successful - Connection Successful - Generate Device Card
      • Log in - Add Device - Get PIN Code via Device Screen - PIN Code Binding - Binding Successful - Connection Successful - Generate Device Card

    2-2 Changing the Device Name

    • Connect to the device - Edit - Change name - Change successful

    2-3 Deleting a Device

    • Entry Points
      • Home Page - Device Card - Delete Card (for cloud devices, this is "Unbind"). If the device is currently connected, disconnect it first.
      • Device Page - Device List - Delete Device

    3. Device Control

    • Entry Points
      • Home Page - Device Card - Device Control - (Automatically connects if not connected) - Navigate to Device Page
      • Device Page - Connect Device

    3-1 Monitoring Area

    • Real-time Monitoring
    • Timelapse File List Preview

    3-2 Print Task Area

    • Current Task Status
      • Pause, Resume
      • Stop
      • Abnormal Status Display
    • Device File Preview

    3-3 Device Control Area

    • Nozzle Temperature Display/Control
    • Heated Bed Temperature Display/Control
    • LED Light Control
    • Fan Control
    • Print Speed Control
    • Extruder Switching Control
    • Extruder Movement Control
    • Build Plate Movement Control

    3-4 Filament Management Area

    • Display and Edit Device Filaments

    4. Slicing Module

    4-1 Preparation Page Feature Updates & Bug Fixes

    • Enabled adding/deleting filaments for multi-extruder machines

    • Loads currently mounted filaments in the device into the filament dropdown list

    • Added "Merge to" and "Delete" functions for filaments

    • Fixed the issue where Snapmaker filaments were not fully displayed

    4-2 Process & Engine Improvements

    • Added new process configuration options

      • Preheat Delta Temperature

      • Filament-level Tool Change Retraction: Retraction Length & Extra Length on Restart

      • Wait for Temperature When Changing Tools

      • Wipe Tower Purging:

        • Ramming Line Width Ratio
        • Enable Change Pressure Advance When Wiping
        • Pressure Advance Value When Ramming
    • Engine Improvements

      • Fixed incorrect temperature settings and display for print-by-part

      • Fixed the issue where G-code starting with "T" would trigger preheat logic

      • Adjusted default wipe tower position to top-left corner

    • Added New Presets

      • Machine Models
        • Snapmaker U1 0.4 nozzle
      • Filaments (Snapmaker U1)
        • Generic PCTG
        • Generic PETG
        • Generic PETG HF
        • Generic PETG-CF
        • Generic PETG-GF
        • Generic PLA
        • Generic PLA High Speed
        • Generic PLA Silk
        • Generic PLA-CF
        • Generic PVA
        • Generic Support For PLA
        • Gneric TPU
        • Snapmaker PLA Basic
        • Snapmaker PLA Matte
        • Snapmaker PLA SnapSpeed
      • Processes (适配Snapmaker U1)
        • 0.20 Standard @Snapmaker U1 (0.4 nozzle)
        • 0.20 Quality @Snapmaker U1 (0.4 nozzle)
        • 0.20 Support @Snapmaker U1 (0.4 nozzle)

    5. Remote Printing

    • Entry Points:

      • Slicing - Print - Pre-print Page
    • Device Page - Device Files - Initiate Print - Pre-print Page

    Known Issue
    • The UI adaptation issue on Ubuntu 20.04.
    • Multi-Filament slicing may occasionally encounter calculation errors.
    • Mac may crash during connectivity or terminate abnormally when closing.
  22. 1.2.2-prerelease

    Expand

    GitHub Release

    Snapmaker Orca V1.2.2 Beta Release

    EN

    • add Snapmaker SnapSpeed PLA profile
    • optimize Snapmaker Matte PLA profile
    • optimize 0.2.0 Standard Snapmaker print

    CH

    • 新增Snapmaker SnapSpeed PLA 耗材
    • 优化Snapmaker Matte PLA 耗材
    • 优化0.20 standard Snapmaker 工艺
  23. 1.2.1

    Expand

    GitHub Release

    Snapmaker Orca V1.2.1 Beta Release

    EN

    • Multi-extruder Feature Adaptation Fixed the issue where the specified wipe tower filament did not take effect.
    • Default mode: On layers with multiple materials printing, multiple materials alternately print the outer wall Image: image
    • Specified material mode: The outer wall is printed by the specified material Image: image

    CH

    • 多头特性适配 修复了指定擦除塔色塔不生效的问题
    • 默认模式:在有多料打印的层,多个料交替打印外壁 Image: image
    • 指定耗材模式:外壁由指定的耗材打印 Image: image
  24. 1.2.0-prerelease

    Expand

    GitHub Release

    Snapmaker Orca V1.2.0 Beta Release

    EN

    • Print Quality Improvements
    1. Snapmaker A250, A350, and Dual machines: Optimized initial extrusion in start-Gcode
    2. Snapmaker Artisan: Optimized extrusion amount after nozzle replacement
    • User Experience Enhancements
    1. Fixed residual user information display issue when switching accounts
    2. Added preset hot-update mechanism Image: image
    3. Material categorization adjusted: Hidden machine model distinctions, now only showing brand-level (e.g., "Snapmaker J1 PETG" → "Snapmaker PETG") Image: image
    • Bug Fixes
    1. Fixed incompatibility issue when switching between "Single Nozzle Multi-Material" and "Single Nozzle" mode tabs
    2. Modified Elegoo material support to cover all machine models

    CH

    • 打印效果提升
    1. Snapmaker A250、A350、Dual 机器的 start-Gcode 初始挤料优化
    2. Snapmaker Artisan 更换挤出头挤料量优化
    • 用户体验提升
    1. 切换用户登录时,前一个用户信息残留问题修改
    2. 添加预设热更新机制 Image: image
    3. 材料划分修改:屏蔽机型区分,只显示品牌一级(例如:Snapmaker J1 PETG → Snapmaker PETG) Image: image
    • Bug 修改
    1. 单头多料模式与单头模式切换 Tab 时不兼容问题修复
    2. Elegoo 耗材支持所有机型的问题修改